Which command on a Layer3-switch will help you configure and activate SVI- IP address for vlan 20? O interface vlan 20 ip address 192.168.20.1 255.255.255.0 no shutdown O interface vlan ip address 192.168.30.1 255.255.255.0 interface vlan 30 ip address 192.168.20.1 255.255.255.0 shutdown no need to configure SVI
Q: Which IPV4 class provides more host in one network Select one: O a. Class A O b. None O c. Class C O…
A: Which IPV4 class provides more host in one network ANSWER : Class C
Q: installer executes 'ipconfig' to see what the IP addres is but it comes up with a 169.254.254.10…
A: Question 7: Answer is APIPA(automatic Private IP Addressing) Explanation: computer need a valid IP…
Q: In a VPN connection, which of the following devices are able to see the original destination IP…
A: Given: In a VPN connection, which of the following devices are able to see the original…
Q: What is a device called that takes in an Ethernet packet, checks the web addresses, and sends the…
A: What is a device called that takes in an Ethernet packet, checks the web addresses, and sends the…
Q: Q4 Which of the following is NOT a network device? Gateway. Linux. А. В. С. Router. D. Firewall. Е.…
A: The most well known and widely employed open source operating system is Linux. Linux is refers to an…
Q: 1. Type ipconfig /all at the command prompt and record the settings of your Ethernet Adapter LAN…
A: Note: Dear user, as per our policy we are supposed to answer only 3 sub-parts in a question,…
Q: A network administrator is configuring DHCP snooping on a switch. Which configuration command should…
A: Q. A network administrator is configuring DHCP snooping on a switch. Which configuration command…
Q: Which term is best described as the practice of adding a device's physical address to a wireless…
A: Question is straight forward. We need to find the right option for the question.
Q: Which statement is accurate in light of current IP address specifications? We must switch to the…
A: introduction: The first choice may not be the proper answer since IPV6 is not being phased out in…
Q: From your laptop, you need to remote into a switch to make some configuration changes. Which…
A: A socket is an internal endpoint for sending or receiving information within a node on a computer…
Q: Which of the following would occur, it the IP addres and Subnet mask are correctly configured but…
A: I have given an answer in step 2.
Q: You have a Windows Server 2016 server named ServerA. ServerA is located on the perimeter network and…
A: if I have a Windows Server 2016 server named ServerA. ServerA is located on the perimeter network…
Q: Refer to the below exhibit. What protocol should be configured on SW-A Port O/1if it is to send…
A: Lets see the solution.
Q: Which statement is accurate given current IP address standards? We need to switch to the newer IPV10…
A: The statement Since we are out of IP addresses for all linked devices, switching to IPV6 is…
Q: I ran the ipconfig command on my computer and it reports an IP address 169.254.75.10 on the ethernet…
A:
Q: How can you subnet the 256 addresses to satisfy your needs (six subnets with at least 10 hosts n…
A:
Q: You are a network administrator and want to configure both IP v4 and IPV6 in the router interface.…
A: you are a network administrator and want to configure both ipv4 and ipv6 in the router interface.…
Q: Which command can you use to configure a router interface as a DHCP client? O a. ip address auto O…
A: ip address dhcp this command is used to configure a router interaface as a DHCP client.
Q: Your company has 2 routers. One router has 15 NICs and the other has 3. One network is shared…
A: IP Address: 128.0.0.0 Network Address: 128.0.0.0 Usable Host IP Range: 128.0.0.1 - 128.0.0.2…
Q: Which of the following port scans attempts to establish a communication channel via TCP three-way…
A: TCP basically stands for Transmission control protocol.It controls all transmission of data in…
Q: How many broadcast domains are created when you segment a network with a 12-port switch? * O 2 O 12…
A: In this question, we are asked the number of broadcast domains created when you segment a network…
Q: In windows XP professional, the typical network settings enables all except for one of the following…
A: Answer to the above question related to Windows Xp professional is in step2.
Q: Which one of the following statement is true about IEEE 802.1X a port-based access control and…
A: IEEE 802.1x is a standard for the port based Network Access Control. It provides an authentication…
Q: What would the command route del default gw 192.168.5.1 eth1 accomplish on your Linux workstation?…
A: The command route del default gw 192.168.5.1 eth1 do Remove the workstation's route to the default…
Q: Which of the following is TRUE about the Ethernet Frame Check Sequence (FCS) field? Q9 It is used…
A: I have answered both the parts and have uploaded image for the solution.
Q: Which of the following is used by hosts and routers to report errors? (A) ICMP (в) NAT CIDR DHCP
A: A distributed denial of service attack is attacked by the attackers which tries to avert allowable…
Q: D. ip route 0.0.0.0 0.0.0.0 19 5. Which of the following types of addresses are automatically added…
A: Types of addresses are automatically added to the routing table
Q: There are a few ways to set DNS IP address in CentOS 8, which way is not recommended? O using nmtui…
A: There are 4 ways to set DNS IP address in CentOS 8. They are : 1) using nmtui 2) using nmcli 3)…
Q: You are building a home network with a dozen machines. Which private IP subnet would you use to…
A: The correct answer is the first option. A private IP is an IP which remains separated from the…
Q: Which of the below cmd command will let the network admin locate which router is not reachable? *…
A: The solution to the given problem is below. ***Note: According to Bartleby policy we are not…
Q: Question & Listen MC9: The following screenshot is the network configuration in one computer host of…
A:
Q: A system administrator at a SOHO remote site would like to modify the range of…
A: The DHCP configuration of a SOHO router can be configured with the beginning and ending DHCP address…
Q: Which one of the following protocols is used to resolve IP addresses to Domain name? O a. DHCP O b.…
A: Here in this question we have asked about the protocol which is used to resolve IP address to domain…
Q: What is a characteristic of an IPv4 loopback interface on a Cisco IOS router? O a. It is a logical…
A: The Answer is given below step.
Q: Which command can you use to configure a router interface as a DHCP client?
A: EXPLANATION - The Cisco router mainly can be configured for purpose of acting a the dynamic host…
Q: A PC cannot connect to any remote websites ping its default gateway, or ping a printer that is…
A: A ping (Packet Internet or Inter-Network Groper) is an essential Internet program that permits a…
Q: What command can you use to assign an ethernet interface eth0 the IP address 192.168.1.2? Pls…
A: Syntax:-ip addr add <ip_address> dev <interface>The above command: ip addr add is used…
Q: 5)which of the following is not a reason that OSPF and EIGRP are more desirable WAN protocols?…
A: Here is the explanation about both the answers regarding the routing:
Q: A friend calls you for help with his home office Internet connection. He is using an 802.11n…
A: Answers:- A friend calls you for help with his home office Internet connection. You are using…
Q: Which of the following are required to connect a Windows device to an 802.11 wireless network?…
A: To connect a Windows device to an 802.11 wireless network we need Alternate IP configuration.
Q: Which devices work on the application layer? Routers Switches Hosts Bridges The Bluetooth protocol…
A: Which devices work on the application layer? Routers Switches Hosts Bridges Answer: Hosts. The…
Q: Demonstrate your ability to configure a switch in Packet Tracer. Your tasks include configuring…
A: Solution:
Q: Which of the following is used by hosts and routers to report errors? A ICMP B) NAT CIDR DHCP
A: One of the most important protocols in the internet protocol suite is the (ICMP)Internet Control…
Q: A technician is troubleshooting a home network connectivity issue with a user's desktop configured…
A: Given questions are both true or false and multiple choice questions so we provide both true and…
Step by step
Solved in 2 steps
- 1.1 Arriving at your university room, you plug into the wired Ethernet jack for the first time. The network admin has a record of your MAC address and your machine can join the network without further action on your part. Assume: Your laptop's Ethernet address is 0a:0b:0c:0d:0e:0f, DHCP server address is 131.111.7.3, your IPv4 address will be 131.111.7.121, the gateway's IP address is 131.111.7.1, and Ethernet address is 00:01:02:03:04:05, the network subnet mask is 255.255.255.0.Write the series of protocol/packet exchanges that occur on the wired Ethernet link, up until you can send a single packet to 128.232.0.20. You do not need to describe packets after this packet has left the link. Include ARP and DHCP.Computer Science Arriving at your university room, you plug into the wired Ethernet jack for the first time. The network admin has a record of your MAC address and your machine can join the network without further action on your part. Assume: Your laptop's Ethernet address is 0a:0b:0c:0d:0e:0f, DHCP server address is 131.111.7.3, your IPv4 address will be 131.111.7.121, the gateway's IP address is 131.111.7.1, and Ethernet address is 00:01:02:03:04:05, the network subnet mask is 255.255.255.0.Write the series of protocol/packet exchanges that occur on the wired Ethernet link, up until you can send a single packet to 128.232.0.20. You do not need to describe packets after this packet has left the link. Include ARP and DHCP.If a user needs 200 IP address than the most suitable class of IP address is A. Class A B. Class B C. Class C D. Class D 2-If a subscriber needs to connect 255 computers, then class ______ IP addressing is the best option A. A B. B C. C D. D
- Q5) The network administrator decided to deny traffic from PC1to PC4 while permitting it from PCO and PC2 to PC4. However, by testing the ACL configuration on R2, the network administrator has discovered that all hosts in the 10.0.1.0/24 network are not ABLE to communicate with PC4. interface Gigabitéthernet 0/0 ipaddress 10.0.3.1255.255.255.0 no shut down ip access-group 115 OUT R28sh access-lists StandardIP access list1ls 10 deny 10.0.1.0 0.0.0.255 20 permit any 1) Is the ACL number convenient for the stated policy? * (O No: for standard between 1and 99 (O No: for standard between 150 and 199 (O Yes: for standard > 99a) 10.21.2.128/8b) 10.128.0.0/25c) 200.200.100.0/24d) 200.200.100.127/25e) 200.200.100.128/25 From the IP above, which one includes: 1) Broadcast Address?2) Network Address?3) Host Address?4) Private Address?5) Public Address? *Notes: Please With ExplanationListing and identifying sockets. the ss command may be used to display the listening connections and the established connections on a machine. Suppose you see the sample output shown below. Netid State Local Addr:Port Peer Addr:Port Users udp UNCONN 0.0.0.0:8003 0.0.0.0:* (pid=29604,fd=3) tcp LISTEN 0.0.0.0:8003 0.0.0.0:* (pid=28832,fd=3) Netid State Local Addr:Port Peer Addr:Port Users tcp ESTAB 127.0.0.1:8003 127.0.0.1:47468 (pid=28832,fd=4) tcp ESTAB 127.0.0.1:47468 127.0.0.1:8003 (pid=29910,fd=3) The output above lists all the connections on the machine where the ss command is run. Helpfully, the last column of the output, entitled Users, also shows the process ID (pid) of the application process associated with the socket and the number of the file descriptor (fd) associated with the socket. (a) Suppose a TCP packet enters the machine, destined to TCP port 8003 corresponding to an established connection. Can you identify the pid and socket fd, if any, corresponding to the socket…
- Assume your PC’s IP address is 172.16.16.5/23. If you want to send a packet to everyone on the LAN, what should be the packet’s destination IP address? a.172.16.16.255 b.172.16.17.255 c.172.16.20.255 d.172.16.23.255 e.172.16.255.255Attempt all Questions:- Part 1) Assign IP address configuration to the S2 server: part 1 question) Write IP-Address, Net mask and Default gateway. Part 2) To assign an IP address to the subnet A and to the subnet B you to have subdivide the network 169.1.96.0/19. Please choose a new netmask that subdivide the given network into atleast 3 (one for future use) subnetworks. You want to have a maximum amount of computer in each subnetwork. part 2 question) Write Net-mask (decimal dotted notation), your subnet A IP Address, Your subnet B IP Address, IP address R2 eth1 and IP Address R2 eth2. Part 3) Write down routing table of R1 (Routing table should include Destination, Next hoop and interface) Part 4) Write down routing table of R3 (Routing table should include Destination, Next hoop and interface) You are planning the network of a small company. The network has the address \( 169.1 .0 .0 / 16 . \) T some structure subnetLoss of network connectivity can be frustrating to users and can be costly to a business. As an IT technician, you might be asked to restore these connections. Familiarity with TCP/IP utilities can help you narrow down the source of the problem. Open a command prompt, type ipconfig /all and press enter 1. What is the IP address? 2. What is the physical address (MAC)? 3. What is the address of the default gateway? 4. What is the address of the DHCP server? 5. What is the address of the DNS server? Type ping cengage.com and press enter. 6. What is the IP address that was pinged? 7. Where did that IP address come from? Type nslookup course.com. 8. What is the IP address returned? Open a browswer and go to sctech.edu. At the command prompt type ipconfig /displaydns and press enter. Browse through the results. 9. What is the IP address for sctech.edu?
- I'm new to subnetting a network. Could you please explain and provide instructions to answer the following questions? Thanks. Thumb up for your help. What is the address of the subnet that is connected to Router1 G0/0? What is the address of Router1 G0/0? What is the address of Switch1 SVI? What is the address of the last host in the subnet connected to Router1 G0/0? What is the broadcast address of the subnet connected to Router1 G0/0? What is the address of the subnet that is connected to Router1 G0/1? What is the address of Router1 G0/1? What is the address of Switch2 SVI? What is the address of the last host in the subnet connected to Router1 G0/1? What is the broadcast address of the subnet connected to Router1 G0/1?Demonstrate your ability to configure a switch in Packet Tracer. Your tasks include configuring initial settings using the Cisco IOS. You are to use a switch and two hosts/PCs on a cabled and powered network and ensure that you have carryout the following: Use a console connection to access the switch. Name the switch Use the password for all lines.Which term is best described as the practice of adding a device's physical address to a wireless router in order to either permit it or deny it access to the network? SSID Disabling Pre-shared Key WPS MAC Filtering
