wo similar pipes of the same diameter of length l1 and l2 are placed in parallel. Calculate the equivalent length of a single pipe of the same diameter. What would be the equivalent length if the two pipes were equal length?

wo similar pipes of the same diameter of length l1 and l2 are placed in parallel. Calculate the equivalent length of a single pipe of the same diameter. What would be the equivalent length if the two pipes were equal length?

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter9: Mass And Mass-related Variables In Engineering

Section: Chapter Questions

Problem 37P

See similar textbooks

Related questions

Q: A 75 mm diameter fire hose discharges water through a nozzle having a jet diameter of 25 mm. The…

A: Given- Pressure at the base of the nozzle (P) =625 KPa Head lost in the nozzle =25% of the velocity…

Q: If the velocity of flow in the 75-mm pipe is 2 m/s, what is the velocity of flow in the 100-mm pipe?…

A: step 1-

Q: wo pipes 1 and 2 of the same length and diameter are connected in parallel. If f2 = 0.9f1, the flow…

A: solution Given friction in pipe 1 =f1friction in pipe 2=f2and f2=0.9f1as the pipes are parallel head…

Q: An oil tanker has an accident and oil pours out at the rate of 200 gallons per minute. Suppose that…

Q: A cylindrical tank 1.5 m diameter is filled with water at 2.5 m high. What size of orifice must be…

A: Solution: Given data: Diameter=1.5 m height of water=2.5 m

Q: ) Using appropriate diagrams, explain the concept of conservation of mass and energy for fluid flow…

Q: A 1233 mm diameter concrete pipe 1855 m long carries 1.5 m3/s from reservoir A, whose water surface…

A: To find out the head loss in meters of pipe 2.

Q: What volume of flow in ft3/s will pass a 10 inch new cast iron pipe with a head loss of 13 ft per…

Q: The diameter of a sewer pipe is 500 mm, Coeff. of roughness is 0.012 and slope of energy gradient is…

A: To find maximum discharge

Q: flowing through a smaller pipes are 25, 15, and 12 L/min, what is the flow rate in the 1.9 cm pipe?…

Q: 12-in diameter pipe is 1.60 ft./s, what is the velocity in a 2.5-in diameter jet issuing from a…

A: Using continuity equation :Q=v1A1=v2A2

Q: Determine the specific gravity of the liquid with a mass of 1,200 kg/m3 2. Determine the…

Q: dpp = 50 mm, respectively. If the distances are given by XX = 4.6 m and YY = 0.9 m, calculate: (i)…

A: Apply Bernoullis theorem…

Q: A water main with 24 inches inside diameter carries a flow of 20 ftᶾ/sec. If the friction factor is…

A: Given data, Diameter (d)= 24 inches = 2feets Rate of flow (Q)= 20 ft³/sec Pump efficiency = 85% =…

Q: use the three fundamental equations , to solve head losses numerical problems. A discharge of 750…

A: Q=750L/s D=400mm L=65m

Q: The cylinder container is measured with a diameter of 250 mm and a height of 300 mm. The empty…

A: Given data in question Diameter Height Time Percentage of volume filled To find out Discharge in…

Q: The discharge of air through a 600-mm pipe is 4 m3/sec. Compute the mean velocity in m/sec

A: Diameter of pipe=600m Discharge=4m3/s

Q: A barge is loaded with 200 tons of coal. The weight of the empty barge is 45 tons. If the barge is…

Q: A system of pipes consists of 250 mm pipe 760 m long, and 200 mm pipe 110 m long. If Q = 40 li/sec,…

Q: Find the approximate height of water upstream of the dam or the headwater in meters, such that an…

A: Given- the volume of bubble at surface is 3 times the volume of bubble at bottom To find- height…

Q: pipe can fill a swimming pool in 15 hrs. If a second pipe is open, the two pipes together can fill…

Q: 2. The diameter of a 3 meter pipe decreases from 450 mm to 150 mm. If the velocity is to decrease…

Q: Given: f= 0.02 for all pipes, Determine discharge in each pipe if total head loss is 20m. L1 = 250…

Q: Calculate the velocity if 10 m3/h of water flows through a 100 mm inside diameter pipe. If the pipe…

A: given data: Diameter(D1)=100mmDiameter(D2)=80mmDischarge ( Q)=10 m3/h

Q: Question 17 (a) Re PVD (b) Re pV Du (c) Re pD Vụ μνρ (d) Re (e) none of the above Question 18 What…

A: ASKED: To answer the questions based on laminar flow through pipes. Given, Diameter of the pipe…

Q: Oricul Q3: Three pipes (A, B and C) are interconnected as shown in figure (3). Determine the flow…

Q: mly from 18” to 6”. With a flow of 5 cfs of oil, compute the mean velocity at cross sections 1 ft…

A: Given data Length=6'' diameter decreases uniformly from 18” to 6” Draw the diagram Discharge=5ft3/s…

Q: If the quantity of air discharged at D is 1,500 m3/min and friction factor of 0.0048, calculate the…

A: Given, Discharge at D =QD=1500 m3/min Friction factor=0.0048

Q: Assume water flow through a pipe with two sections. Assume the diameter is 6 and 9inches. The…

Q: 2 in. by 6 in., is installed in a vertical pipe line carrying water. A differential manometer…

A: Given:- 12 in by 6 in gauge levels=2.50ft Venturi coefficient =0.97 To find:- actual discharge

Q: Water with a velocity of 6.41 m/s flows through a 125 mm diameter pipe. Solve for the volume flow…

Q: Water with a velocity of 3.56 m/s flows through a 106 mm diameter pipe. Solve for the volume flow…

A: Given Data: The velocity of the flow of water is v=3.56 m/s. The diameter of a pipe is d=106 mm.…

Q: Calculate flow, velocity, and headloss in each pipe and pressure at point B in ft, if supply…

Q: venturiflame 0.8m wide throat is provided in a rectangular channel of 2m width.If the depth of water…

Q: Say we have a ball dropped into well with a velocity of 3.28ft/s. After 10s, a sound of splash is…

Q: Compute the actual discharge from a standard 5 cm diameter orifice under a head of 3 m of water if…

A: Diameter = 0.05m Head = 3m Cc = 0.607 Cv = 0.98

Q: A pipe 3in in diameter is fitted to a water tank as shown in figure 2. The nozzle 1in in diameter at…

A: To determine: flow rate pressure at C velocity at D Given, Pipe diameter (D) = 3 in Nozzle…

Q: Two pipelines A and B are connected in series. The discharge flowing in pipe A is 2500 gallons per…

Q: A 2-foot diameter pipe carries stormwater discharge from a site. The concrete pipe was designed with…

A: Given: The diameter of the pipe is 2 ft. The slope is 0.8 ft per 90 ft. The depth of flow is 0.8 ft.…

Q: A 3-inch diameter pipe is connected to a 4-inch diameter pipe. If the velocity of flow in the…

A: step 1-

Q: What diameter of pipe should be installed to carry 1.42 m³/s of water for 8 km with a loss of head…

A: Given: The discharge is 1.42 m3/sec. The length of the pipe is 8 km. The head loss is 1.50 J/N.

Q: Q3 :Pumping station was designed to deliver water flow of 28L/s using old delivery pipe as shown in…

A: Given :- Pumping station was designed to deliver water flow of 28 L/s using old delivery pipe N =…

Q: Water is flowing through a horizontal pipe of diameter 200 mm at a velocity of 3 m/s. A circular…

A: Given: Pipe diameter, D = 200 mm = 0.2 m Velocity of flow, V = 3 m/s Diameter of solid plate, d =…

Q: Two similar pipes of the same diameter of length l1 and l2 are placed in parallel. Calculate the…

A: Given,length of first pipe=l1length of second pipe=l2Let,L=length of equivalent pipeD=diameter of…

Q: A pipe line consists of successive lengths of 380-mm, 300-mm, and 250-mm pipe. With a continuous…

A: Q=250L/s D1=380mm D2=300mm D3=250mm

Q: ng water up to a height of 3.0 meter and air at the upper part with an orifice of 100 mm at its…

A: Given:- h=3.0m orifice= 100 mm air removed=50% Cd=0.62 To find:- discharge passing through the…

Q: Water (ρ = 1000kg / m3, μ = 10-3Pa.s) flows at a speed of 1.6m / s (Reynolds number Re = 0.8 105) in…

A: Given: The density of water is 1000 kg/m3. The dynamic viscosity is 10-3 Pa.sec. The flow speed is…

Q: Water is flowing in a 2.5-in.-diameter pipe at 60 ft/sec. If the pipe enlarges to a diameter of 5…

A: Given: velocity Diameter To find: Reduced velocity

Q: Fluid Mechanics Two pipes of diameter 0.06 m and 0.01 m respectively, each of length 150 m are…

A: The diameter of the first pipe is D1=0.06 m. The diameter of the second pipe is D2=0.1 m. The length…

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

9. Two similar pipes of the same diameter of length l₁ and l₂ are placed in parallel. Calculate the equivalent length of a single pipe of the same diameter. What would be the equivalent length if the two pipes were equal length?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

The actual pipe length of diameter 80 mm is 66 m. Along the pipe there are two 90° elbows, one globe valve and one 90° long radius bend. Determine the equivalent and the effective pipe length.
diameter of pipe = 200mm Cc = 0.61Cv = 0.97 Considering the figure, what is the flow of water?
A fluid (s=0.92) flows through a 97 mm diameter pipe at a velocity of 4 m/sec. Compute the Volume flow rate. (m3/s) Round your answer to 4 decimal places.
The diameter of a 6-ft length of pipe increases from 6 inches to 24 inches. The diameter is to vary so that the mean velocity of liquid flowing through the pipe will decrease uniformly with distance from the 6 inches end. Compute the diameter at each foot along the pipe. Draw to scale the longitudinal profile of the pipe. please provide a detailed solution so i can understand it thoroughly.
There is a pipe section with a 16 inch diameter and a pipe section with a 12 inch diameter. The flow rate through both pipes is 13 cubic feet per second. The velocity in the 16 inch pipe is 2 feet per second. What is the velocity in the 12 inch pipe?
(a) Using appropriate diagrams, explain the concept of conservation of mass and energy for fluid flow in a pipe.
Figure shows that the pipe flow of 50 m^3/hr, is driven by pressurized air in the tank Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014. *12.9517*99.9358*30.4889*39.5136 What gage pressure p1 in kPa, is needed to provide the given flow rate? *1121 kPa*1692 kPa*1328 kPa*1725 kPa Please answer with complete and detailed solutions. thank you. ASAP
19. Situation 7 - Three pipes are connected in series. The first pipe has a diameter of 500 mm and a length of 600 m. The second pipe has a diameter of 400 mm and a length of 500 m. The third pipe has a diameter of 300 mm and a length of 200 m. Use f = 0.02 for all pipes. If Q=0.8 m^3/s, a. What is the equivalent diameter, in mm, of a single pipe having the same properties that could replace the three pipes? Round off to the neares whole number. b. What is the total head loss, in meters, from pipe 1 to pipe 3? Round off to three decimal places. c. What is the total head loss, in meters, in pipe 1? Round off to three decimal places.
One pipe can fill a pool in 45 minutes, and two pipes can fill the same pool in 20 minutes. How long will it take for the second pipe alone to fill the pool? A. 36 minutes B. 25 minutes C. 30 minutes D. 15 minutes E. None of the above
All friction factor f = 0.02 All pipe lengths L = 250m Diameter of Pipe A = 400mm with Flow Rate at Pipe A = 500 L/s Diameter of Pipe B = 300mm Diameter of Pipe C = 200mm Refer to the illustration below
Three pipes are connected in series. The first pipe has a diameter of 500 mm and a length of 600 m. The second pipe has a diameter of 400 mm and a length of 500 m. The third pipe has a diameter of 300 mm and a length of 200 m. Use f = 0.02 for all pipes. If Q=0.8 m^3/s, What is the equivalent diameter, in mm, of a single pipe having the same properties that could replace the three pipes? Round off to the neares whole number.
Answer question 9 only Answers: a) 0.82 Tons/m3 b) 14.61 Tons/m2 c) 10.195 cm