X 1. One million gallons per day of municipal wastewater with a BOD5 of 260 mg/L and suspended solids of 220 mg/L are processed in a primary plus secondary activated- sludge plant. If the primary removal efficiencies for the BOD5 and TSS are 25% and 70%, respectively, then, the total sludge (in kg/day)

X 1. One million gallons per day of municipal wastewater with a BOD5 of 260 mg/L and suspended solids of 220 mg/L are processed in a primary plus secondary activated- sludge plant. If the primary removal efficiencies for the BOD5 and TSS are 25% and 70%, respectively, then, the total sludge (in kg/day)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

If a manufacturing facility generates raw wastewater that is predominantly composed of dissolved and suspended solids and with ThOD of 100 mg/L, which of the following treatment equipment you could do away with? Check all that applies.
As an operator of a wastewater treatment facility, you have learned that your plant runs well at an SRT (based on MLVSS (X) in the aeration basin) of 12 days. If today’s MLVSS (X) concentration is 2,700 mg/L and the RAS (Xr) concentration is 5,500 mg/L, how many L of sludge should you waste from the secondary clarifier today? Other design conditions: Average influent flow = 12,000 m3/d Influent soluble BOD = 150 mg/L Required effluent TSS = 30 mg/L Aeration tank Volume = 1,000 m3
Please calculate the theoretical OD, COD, and ultimate BOD of a wastewater containing (a) 500 mg/L acetate (CH3COOH), which is fully biodegradable; or (b) 500 mg/L oil (C40H80), which is not biodegradable.
A primary clarifer removes 35% of BOD5 and 55% of suspendedsolids from the incoming wastewater. Calculate the mass of solidsand mass of BOD5 removed in kg/d for a plant processing 4500 m3/dof wastewater with 275 mg/L BOD5 and 400 mg/L SS.
Assume that taal lake is 100m2 and its average height is 5ft. Wastewater thatflows into the lake are the following: a. Food square kitchen waste 5m3/hr; Total Dissolved Solids (TDS) is 50g/L whichoperates 8hrs per dayb. CIH 5m3/hr kitchen waste; TDS is 20mg/L which operates 4hrs per dayc. PCH 20m3/day diluted laboratory waste ; TDS = 40mg/L (1)Determine the volume of wastewater which taal lake can still be contained withoutrainfall.(2)During operational hours a heavy rain fall, the rain gauge reading is 1.5m. Will the taalLake overflow? What is the volume of water that will over flow?(3). Compute the TDS concentration of the overflow.
For an activated sludge basin with a flow rate of 500 L/s if the influent BOD5 = 100 mg/L, the MLVSS = 3000 mg/L and the volume of the aeration basin = 766100 gallons Find the F/M ratio If the WAS X= 10000 mg/L, find the WAS flowrate (m3/d)
A wastewater treatment plant discharges 2.16x107 L/hr of treated effluent with an ultimate BOD of 22.0 mg/L and dissolved oxygen concentration of 5.0 mg/L to a river. Upstream of the waste discharge, the river has a flow of 9.0 m3/s, an ultimate BOD of 10.0 mg/L, and dissolved oxygen concentration of 7.0 mg/L. Both the river and effluent are at 20°C. After the river and effluent mix, the river flows at a velocity of 0.13 m/s and has a depth of 1.8 m. The deoxygenation rate constant for the waste is 0.45 day-1. A fish hatchery is located 9.6 km downstream of the waste discharge. The hatchery requires 5.0 mg/L DO for healthy fish growth and reproduction. Is the hatchery requirement being met? show all work
The characteristics of the synthetic textile wastewater are 1500 mg/L BOD, 2000 mg/L SS, 30 mg/L nitrogen, and no phosphorus. The characteristics of the domestic wastewater are 200 mg/L BOD, 240 mg/L SS, 35 mg/L nitrogen, and 7 mg/L phosphorus. Find the nitrogen concentrations in the mixture. The ratio of flow rate is domestic/textile = 4/1
A completely mixed treatment lagoon of 2500 m3 is designed to accommodate aninput flow of 35 L/s of a nonconservative pollutant with a concentration of 157 mg/L and a rateconstant of 0.68 d-1.a) Derive the appropriate reactor equation and determine the pollutant concentration atthe exit of the lagoon. If the provincial limit for release into waterways is 90 mg/L, doesthe effluent meet the limit?b) If the limit is not met, what would you suggest changing and/or implementing? Providetwo options.
The density of water at 4°C is 1000 kg/m3 at atmosphericpressure. The gravity acceleration constant (g) is 9.81 m/s2. Thespecific gravity of an industrial wastewater (SGww) is 1.32. Whatis the specific weight of this wastewater?
H2. Consider the treatment of a wastewater with the following characteristics: T = 25°C, total flow 650 m3/d, wastewater composition: sucrose (C12H22O11): C = 400 mg/L, Q = 250 m3/d, acetic acid (C2H4O2): C =940 mg/L, Q = 350 m3/d a) Estimate the methane production, from the anaerobic degradation of the discharge using the Buswell equation, in m3/d b) Calculate the total concentration of the residual water in terms of COD, the total mass flow of COD in the residual water (kg/d) and estimate from this last data the production of methane, in m3/d.
You are building a wastewater lagoon with an inlet/outlet flow rate of 3,100 m3/day. The BOD inlet load is 26 mg/L and you need to achieve 12 mg/L at the outlet. The half-life of BOD is 2.4 days. What is the volume required for the lagoon? If the wastewater stopped entering the lagoon and was replaced by freshwater, how long would it take for the outlet BOD concentration to reach 1 ppm?