You have a solenoid with an initial current of 118 A and a turn density of 5365 What is the initial magnetic field through the solenoid? Binitial = The current in the solenoid drops to 52 A over the course of 1.1 ms. What is the final magnetic field through the solenoid? Bfinal= Inside the solenoid is a coil with 74 loops and a radius of 7.9 cm. The coil is aligned so that the magnetic field from the solenoid passes through the coil perpendicular to the plane of the coil (directly down the center of the coil). What is the magnitude of the induced emf in the 74-turn coil at the center of the solenoid during this change in magnetic field? Enter you answer as a positive number. emf= The coil has a resistance of 20 2. What is the current through the coil? Icoil = loops m What is the power dissipated by the coil? W

You have a solenoid with an initial current of 118 A and a turn density of 5365 What is the initial magnetic field through the solenoid? Binitial = The current in the solenoid drops to 52 A over the course of 1.1 ms. What is the final magnetic field through the solenoid? Bfinal= Inside the solenoid is a coil with 74 loops and a radius of 7.9 cm. The coil is aligned so that the magnetic field from the solenoid passes through the coil perpendicular to the plane of the coil (directly down the center of the coil). What is the magnitude of the induced emf in the 74-turn coil at the center of the solenoid during this change in magnetic field? Enter you answer as a positive number. emf= The coil has a resistance of 20 2. What is the current through the coil? Icoil = loops m What is the power dissipated by the coil? W

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter19: Magnetism

Section: Chapter Questions

Problem 63P: Ail electron is moving at a speed of 1.0 104 in/s in a circular path of radius 2.0 cm inside a...

See similar textbooks

Similar questions

Ail electron is moving at a speed of 1.0 104 in/s in a circular path of radius 2.0 cm inside a solenoid. The magnetic field of the solenoid is perpendicular to the plane of the electrons path. Find (a) the strength of the magnetic field inside the solenoid and (b) the current in the solenoid if it has 25 turns per centimeter.
A toroid with a square cross section 3.0cm3.0cm has an inner radius of 25.0 cm. It is wound with 500 turns of wire, and it carries a current of 2.0 A. What is the strength of the magnetic field at the center of the square cross section?
A circular coil with 200 turns Las a radius of 2.0 cm. (a) What current through tire coil results in a magnetic dipole moment of 3.0 Am2? (b) What is the maximum torque that the coil will experience in a uniform field of strength 5.0102 ? (c) If tire angle between and B is 45°, what is the magnitude of tire torque on the coil? (d) What is the magnetic potential energy of coil for this orientation?
Two frictionless conducting rails separated by l = 55.0 cm are connected through a 2.00- resistor, and the circuit is completed by a bar that is free to slide on the rails (Fig. P32.71). A uniform magnetic field of 5.00 T directed out of the page permeates the region, a. What is the magnitude of the force Fp that must be applied so that the bar moves with a constant speed of 1.25 m/s to the right? b. What is the rate at which energy is dissipated through the 2.00- resistor in the circuit?
Figure P31.13 shows a uniform magnetic field. a. Can you find an Amprian loop that gives a circulation integral of zero? If so, draw the loop and the field. If not, explain why not. b. Can you find an Amprian loop that gives a nonzero circulation integral? If so, draw the loop and the field. If not, explain why not. Figure P31.13
A solenoid of area Asol produces a uniform magnetic field (Fig. P32.28; shown in cross section). The solenoids magnetic field points out of the page and is decreasing according to B = B0(t0/t)2. A single conducting loop of area Aloop and resistance R is coaxial with the solenoid, with Aloop Asol. Find an expression for the current in the loop. What does the sign of your answer mean?
A toroid has a major radius R and a minor radius r and is tightly wound with N turns of wire on a hollow cardboard torus. Figure P31.6 shows half of this toroid, allowing us to see its cross section. If R r, the magnetic field in the region enclosed by the wire is essentially the same as the magnetic field of a solenoid that has been bent into a large circle of radius R. Modeling the field as the uniform field of a long solenoid, show that the inductance of such a toroid is approximately L=120N2r2R Figure P31.6
A small, circular washer of radius a = 0.500 cm is held directly below a long, straight wire carrying a current of I = 10.0 A. The washer is located h = 0.500 m above the top of a table (Fig. P31.69). Assume the magnetic Held is nearly constant over the area of the washer and equal to the magnetic field at the center of the washer. (a) If the washer is dropped from rest, what is the magnitude of the average induced emf in the washer over the time interval between its release and the moment it hits the tabletop? (b) What is the direction of the induced current in the washer?
A constant magnetic field of 0.275 T points through a circular loop of wire with radius 3.50 cm as shown in Figure P32.1. a. What is the magnetic flux through the loop? b. Is a current induced in the loop? Explain. FIGURE P32.1
Singly charged uranium-238 ions are accelerated through a potential difference of 2.00 kV and enter a uniform magnetic field of magnitude 1.20 T directed perpendicular to their velocities. (a) Determine the radius of their circular path. (b) Repeat this calculation for uranium-235 ions. (c) What If? How does the ratio of these path radii depend on the accelerating voltage? (d) On the magnitude of the magnetic field?
Determine the initial direction of the deflection of charged particles as they enter the magnetic fields shown in Figure P29.2.
A solenoid is 40 cm long, has a diameter of 3.0 cm, and is wound with 500 turns. If the current through the windings is 4.0 A, what is the magnetic field at a point on the axis of the solenoid that is (a) at the center of the solenoid, (b) 10.0 cm from one end of the solenoid, and (c) 5.0 cm from one end of the solenoid? (d) Compare these answers with the infinite-solenoid case.