Crane Selection:
For the precast panel activity, I chose the Liebherr LTM 1220-5.2 because it is capable of lifting the 42-ton precast wall panels into place. At 128’ the crane is still able to lift 44.7 tons with its hydraulic boom. The crane will have no problem lifting the panels to a height of 46ft or a horizontal distance of 65ft. This is why I would recommend setting the crane up on the other side of the railroad tracks and extend the boom over the tracks when the track is clear. With its impressive axle load active rear axle-steering, it will lift these wall panels with ease and be able to maneuver when complete. The reason why this crane beat its competition is because it has such a long hydraulic boom which helps on this particular
…show more content…
This forklift can lift 9000lbs again like the Pettibone which makes it a great back-up if you can’t get your hands on one.
JCB 535-125 HI-VIZ:
This forklift is a fantastic alternative and could possibly be a better pick than the Pettibone. This Telehandler has an engine power of 93kw ( 125HP), Maximum lift capacity of 8000lbs and a lift height of 40’. This telehandler offers amazing visibility as well for safer environments.
Hydraulic Scissor Lift Selection:
I would use the Skyjack SJ III-9250 scissor lift because it has 15,200 total weight with a platform height of 50’ which exceeds both of the requirements. This scissor lift has a width of 92”and has a 4wd system which makes it easier for rough terrain. It also has disc brake system on rear axle which makes it less jerky when elevated. The reason why this hydraulic lift beat its competition is because it has the best safety reviews compared to the others. Safety should be a general contractor’s main objective and this equipment is the safest. Specifications can be found at: http://stevensoncrane.com/wp-content/uploads/2015/09/SJ9250_RT.pdf Alternatives
Haullotte
…show more content…
This articulating boom has a width 7’ 09” and weighs 12,650lb. This articulating boom has the best reach envelope in its class. It also has an optional articulating jib that can get you into many different hard to reach areas. It has great maneuverability for small work areas and can get you around the job site very easily. It has a fuel efficient and environmentally- friendly tier 4 engine, and is great for really any profession. The reason why this articulating boom beat out its competition is because it is diesel and with the rough terrain it is necessary to have an engine that can go over uneven surfaces with
The lift market in North America is divided into two main segments of In-ground and Surface. Surface lifts (two posts, four posts, scissor, and other) take up 79% of the total market in 1999, while In-ground (single post, and multiple post) occupied the rest with 21%. There were a total of 49272 lifts sold in North America and the U.S. market is 10 times larger than the Canadian market. Hoists ranged from $3,000 to $15,000, while Jolson Auto motive’s average retail price was in the upper middle at $10,990 (company received average of $9,210). Scissor lifts account for 4.7% of the total lift market with 2316.
Bang! Down goes the car off the lift, the legs broke off the locks and the car falls onto its side on the ground. Do you want this to happen to you? Or do you want the best hydraulic two-post lift you can buy for your shop? Because I know I do, I am here to talk to you and tell you about the best two-post car lift to own. The two-post car lifts are the best for in a garage because they go right under the car's frame, they have a high weight capacity, and they are decently cheaper than any other lift. There are many other types of lifts though like the four-post lift, scissor car lift, portable car lift, in-ground car lift, alignment lift, and many more.
First, let's talk about trucks. A six point six liter Chevy Duramax has four hundred forty five horsepower. A six point seven liter Powerstroke has four hundred forty horsepower. Duramaxes are stronger than Powerstrokes by five horsepower.
Level Lift is a locally owned and operated company that does excavation and demolition, lifts homes and other large structures, repairs and expands building foundations (in case you ever want that bigger basement), and does shoring and floor levelling. They take safety seriously and are WorkSafe BC registered, with extra insurance coverage and an A+ BBB accreditation. Not to mention the company has a completely no-damage work
Included premium quality piston seals plus an internal magnetic filtration system working together to extend pump life. Both jacks featured the Rapid Pump dual parallel pump technology for lifting in far fewer strokes. The universal joint release providing a precise load control for smooth descent is a standard feature in both jacks. The heavy duty 3-ton and the super duty 3-ton jack were both precision welded constructed. eventually cost was and features was in which I based my purchased on. With both jacks being so similar in standard features. I couldn’t justify spending $199 on a jack when I could purchase a the $89 3-ton jack that was low enough to fit under my vehicles, which will get the job done just as well. I ended up buying the 3-ton heavy duty jack over the 3-ton Daytona super duty jack, mainly because of two reasons. One was the cost and having such similar features. Second was the capability to fit the heavy-duty jack under vehicles that are 2” of the ground. The Daytona wasn’t not low enough to allow me to fit it under a lowered vehicle lower than
The aforementioned new turbocharged engine is a 2.0-liter four-cylinder that is good for 275-hp and 295 lb-ft of torque. Across the lineup, you can select from either a six-speed manual or an eight-speed automatic transmission with paddle shifters in the steering wheel.
The main purpose of this paper is to have a brief analysis and evaluation on the project provided by Road King Trucks Company. Six main problems offered are the main topics in this paper. After evaluation, a recommendation will put out to choose the right engine and on the project.
Backhoe & Skidsteer: Backhoe and skidsteer machines are often used on larger job sites where there are many stumps to be removed. This method is also ideal for large, deep-rooted stumps.
The main body of the vehicle (closest to the ground) houses the main motors, and also seats the driver, along with all the controls used for mobility and functioning the crane. The crane’s main feature is an extendable shaft, which at the tip is attached to a hanging hook or loop. The vehicle itself has high-grip rubber wheels that allow it to carry materials using a metal hook, which can be attached to objects for transport. The attachment is able to extend to reach farther or higher, depending on where the object needs to be placed (Manitowoc, n.d.). The vehicle may fail if the main body of the crane is not heavy enough to support the object it is carrying, resulting in the crane tipping over. In addition, overloading the crane may cause its arm to break. To decrease the risk of failure, the crane has stabilization apparatus, which roots the vehicle into the ground to avoid it tipping over during usage. The most innovative feature of the vehicle is the extendable shafter, which allows for a compact “arm” that can easily extend to reach greater lengths. The materials the vehicle is made out of, mainly metal, rubber, and metal springs, are not necessarily suited for Mars. Although metal can survive well in harsh conditions, rubber cannot; it is prone to cracking in heavy sun or freezing conditions, which Mars is full
If you want to know more about the positive features of this device, then you can take a look at the list below. Here you will get the amazing features of Liftmaster 3280 that surely will satisfy you. Go ahead and take a look.
The cab suspension gives the operator a calm ride and helps them to get a lot of work done. The powerful lights and visibility make it very easy to run the W155 day or night. It is a an option to add reverser, but it will unplug the machine effortlessly. There are quick attachments that can be gotten with the windrower making it very easy to transport and easy to store. The windrower cost roughly $150,000. The engine in windrower is a John Deere engine created in their own factory ( New Releases and Information, 2017).
The Makita DLX6023T is the ideal cordless power tool set for any construction, carpentry and do-it-yourself worker. The six piece kit includes a variety of different work tools to perform a variety of laboring in areas such as screw driving, drilling, cutting and even grinding. The set makes it possible to perform work in all areas including (but not limited to) metal, wood and concrete work – both night and day. The tools’ comfort designs in this kit are ergonomically fit for the user, so there is no worker strain or detriment on the job. With one charger and two batteries, the kit comes ready to perform for longer hours allowing continual exchange of the batteries.
Baxton Technology Company manufactures surface automotive hoists which are used by garages, service stations and other repair shops to lift cars for servicing. Because of its design, quality of workmanship, safety features, ease of installation and five-year warranty, Baxton Lifts achieved a reputation as the “Mercedes” of the hoist industry and is considered a leader in automotive lift safety in Canada and United States.
Utilizing a forklift rental can spare you a great deal of cash, particularly in the event that you are another business that won't not have the advantage of a substantial working spending plan. Fresh out of the plastic new forklifts can turn out to be entirely costly, which is the reason you ought to think about utilizing as a forklift rental. On the off chance that you don't have a huge spending plan, utilizing a forklift rental is a decent approach to reduce some of your
Our investigation is going to mainly focus on the Tanfeild, specifically on their subsidiary snorkel. Snorkel is a company that produces lifts all over the UK. The company produce most of the worlds lift to a high quality standard, with roughly more than 35 machines available at heights that extend from 2m to about 40m. With scissor lifts, booms, towable lifts, push-arounds and low-level access platforms, they have the lifts for almost all work at height applications, from fixing a house to building a skyscraper. Snorkel UK offers every one of access platforms, large or small the chance to buy straight from the factory. No matter what your circumstances are you are able to hire one of these machines straight from the shop, whether it’s for a plant company or for facilities to maintain their professional look. Snorkel is a PLC which means “public limited company” Tanfeild and xtreme share the company Snorkel, xtreme owns 51% of the company and Tanfeild own 49% of the company adding up to 100%.