1. A 4-pole dc shunt generator with shunt field resistance of 100 ohms and armature resistance of 1 ohm has 378 wave connected conductors in the armature. The flux per pole is 0.02 Wb. If a load resistance of 10 ohms is connected across the generator terminals and the generator is driven at 1000 rpm, calculate the a) generated voltage b) terminal voltage c) armature current d) power absorbed by the load resistor.

1. A 4-pole dc shunt generator with shunt field resistance of 100 ohms and armature resistance of 1 ohm has 378 wave connected conductors in the armature. The flux per pole is 0.02 Wb. If a load resistance of 10 ohms is connected across the generator terminals and the generator is driven at 1000 rpm, calculate the a) generated voltage b) terminal voltage c) armature current d) power absorbed by the load resistor.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 4-pole DC shunt generator with wave-wound armature has 40 slots each having 12 conductors. Armature resistance is 1Ω and shunt field resistance is 200Ω. The flux per pole is 25 mWb. If a load of 50 Ω is connected across the armature terminals, calculate the voltage across the load when the generator is driven at 1,000 rpm. What will be the load voltage if the generator is lap wound?
5. A 4-pole, d.c. shunt generator with a shunt field resistance of 100 Ω and an armature resistance of 1 Ω has 378 wave-connected conductors in its armature. The flux per pole is 0.02 Wb. If a load resistance of 10 Ω is connected across the armature terminals and the generator is driven at 1000 r.p.m., calculate the power absorbed by the load.
The armature of a 14 pole DC shunt generator has 60 slots and is lap wound with 13 conductors per slots. The generator is running at a speed of 630 rpm and supplies a resistive load of 16 ohms at a terminal voltage of 310V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.
The terminal voltage of a 75-kW shunt generator is 600 V at rated load. The resistance of the shunt-field circuit is 150 Q, and the armature-circuit resistance is 0.1 Ω. Find the generated emf. a) 612.9 V b) 621.9 V c) 692.1 V d) none of the above In a 50-kW 245-V shunt generator, 258 V are generated in the armature when the generator delivers rated load at rated voltage. The shunt-field current is 4 A. Find the resistance of the armature. a) 0.03 Ω b) 0.062 Ω c) 0.106 Ω d) none of the above A load that has a resistance of 8 Ω is connected to a separately excited generator that has an armature-circuit resistance of 0.5 Ω. A) What is the armature current when the generated emf is 130 V? a) 1.53 A b) 15.3 A c) 153 A d) none of the above
An eight-pole DC shunt generator supplies a load of 12.5 ohm at 250 V. Its armature carries wave connected 778 conductors and its armature and field winding resistances are 0.24 ohm and 250 ohm respectively. Find the armature current, the induced emf and the flux per pole. Assume the generator runs in 500 rpm.
A 6-pole, lap-wound, DC generator has a useful flux per pole of 0.08 Wb. The armature winding consists of 200 turns and the resistance is 0.055 ohms. Calculate the terminal voltage if the resistance of shunt and series field are 100 ohms and 0.02 ohms respectively, when the generator is running at 1000 rpa. Assume generator connection as short-shuntb. Assume generator connection as long-shunt
A 10 kW, 250V DC, 6-pole, long-shunt generator runs at 1000 RPM when delivering full-load. The armature has 534 simplex lap connected conductors. The full-load total Cu losses are 660 W and the total brush drop is 1 volt. Determine the flux per pole if the field resistance is 250 ohms and series field resistance is 0.05 ohms.
A de series generator speed of (800 rpm), the terminal voltage is (300 ) on load, armature resistance is three times of the field resistance), and no load generated voltage is 20 percentage greater than the terminal voltage. Assuming that the flux is reduced by (6.5%) due to armature reaction, find armature resistance and field resistance if load current supplied by the generator 63.7 4.
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses
7) The flux per pole of a four-pole generator is 0.05 wb. It driven at a speed of 1500 rpm. In order to have an induced emf of 20 v per conductor, , if the winding is lap-connected, find (a) the number of conductors in series in each parallel path, (b) the number of conductors between brushes to generate 240 v, and (c) the total number of conductors in the armature.
An 8-pole lap wound d.e shunt generator has 120 slots with 4 conductors per slot. If each conductor can carry 250 A and flux per pole is 50 mWb. Find the speed so that it gives 240 V on open circuit. If terminal voltage of the generator drop to 220 on full load, find the armature resistance.
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to