1. A cylindrical tank 80 cm in diameter and 90 cm high is filled with a liquid. The tank and the liquid weighed 420 kg. The weight of the empty tank is 40 kg. Determine the following properties of the liquid: a. Unit weight, in kN/m³ b. Mass Density, in kg/m³ C. Specific Gravity, SG Ans. y = 8.24 kN/m³; p = 839.96 kg/m³; SG = 0.839

1. A cylindrical tank 80 cm in diameter and 90 cm high is filled with a liquid. The tank and the liquid weighed 420 kg. The weight of the empty tank is 40 kg. Determine the following properties of the liquid: a. Unit weight, in kN/m³ b. Mass Density, in kg/m³ C. Specific Gravity, SG Ans. y = 8.24 kN/m³; p = 839.96 kg/m³; SG = 0.839

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

In figure 3 compute the pressure head difference between m and n, in feet of fluid A, when: A. Fluid A is gasoline (sp gr 0.715), the gage liquid is mercury, and z = 47.77 in B. Fluid A is oil (sp gr 0.908), the gage liquid is water, and z = 27.77 in C. Fluid A is sea water (w = 64.0), the gage liquid has a specific gravity of 2.95, and z = 57.77
If a triangle of height d and base b is vertical and submerged in liquid with its vertex at the liquid surface (see Fig. 2), derive an expression for the depth of its center of pressure. a) ?/2 b) 4?/3 c) ?/4 d) 3?/4 e) ?/3
Given: Specific weight of water = 9.81 kN/m3 Specific gravity (S.G) of oil = 0.8 Find: Density of water in kg/m3. Specific weight of oil in kN/m3
Determine the magnitude and point of application of the horizontal and vertical components of the hydrostatic pressure force acting unit length of the prismatic surface abcdef. (the unit weight of water= 9.81 kN/m3
Calculate the pressure differential of water across the surface of a spherical droplet of radius 200 nm at 20 °C.
In figure 5, determine the pressure head difference in feet of water between m and n, when z is: (a) 3.77 in.; (b) 10.77; (c) 15.77 in Determine the value of z if the pressure at n is 1.477 lb per sq. in. greater than at m. If the pressure at m is 20.77 lb per sq. in, what is the corresponding pressure at n when z = 8.77 in.
A body, with a volume of 2 m³, weighs 40 kN. Determine its weight when submerged in a liquid with SG = 1.59.
In figure 4, determine the pressure head difference in feet of water between m and n, when z is (a)6.5 in; (b)25.1 in; (c) 35.1 in
The water tank has a diameter of 750mm , a height of 1750mm to which the Initial height of water was 5 cm. If water was to be filled 90% of height and the water meter initial reading is 2000L, a. what is the final reading of the water in L b. Find the mass of water tank if its initial weight is 45 kg
An open rectangular tank 3.8m high, 2.5m wide and 6m long is filled with water at a depth of 2.2m. If it is accelerated at 2.3 m/s^2 and is moving at a plane inclined 15 degrees from the horizontal, determine the following: a. acceleration of the vessel along the horizontal; and b. angle of fluid inclination. Note: Use density of water as 1000kg/m3 and specific weight as 9.81kN/m3.
As shown in the figure, determine the gage pressure on the bottom of the tank in kPa. Considering the total gage pressure at the bottom of the tank what will be the absolute pressure if the barometric pressure if 725 torr?
Convert the 115/85 systolic/diastolic pressures given in millimeters of Hg to Pa .