1. During Atterberg limit tests in the soil mechanics laboratory, the students obtained the following results from a clayey soil. Liquid limit tests: Number of Moisture blows, N content (%) 14 38.4 16 36.5 20 33.1 28 270 Plastic limit tests: Students conducted two trials and found that PL = 172% for the first trial and PL = 17.8% for the second trial. a. Draw the flow curve and obtain the liquid limit. b. What is the plasticity index of the soil? Use an average value of PL from the two plastic limit trails.

1. During Atterberg limit tests in the soil mechanics laboratory, the students obtained the following results from a clayey soil. Liquid limit tests: Number of Moisture blows, N content (%) 14 38.4 16 36.5 20 33.1 28 270 Plastic limit tests: Students conducted two trials and found that PL = 172% for the first trial and PL = 17.8% for the second trial. a. Draw the flow curve and obtain the liquid limit. b. What is the plasticity index of the soil? Use an average value of PL from the two plastic limit trails.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter9: In Situ Stresses

Section: Chapter Questions

Problem 9.11P

See similar textbooks

Similar questions

For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
The following are the results from the liquid limit tests for a soil: Number of Blows, N Moisture Content, % 16 38.3 21 33.4 34 29.1 a) Draw the flow curve and obtain the liquid limit. b) If the Plastic Limit is determined to be 8%, what is the Plasticity Index of the soil? c) What is the Liquidity Index of the soil if the in situ w = 35%? What does this specific result tell us about this soil?
Subject: Soil Mechanics Please provide a solution and a diagram For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. a. 1.081 x 10^-3 b. 2.56 x 10^-2 c. 1.31 x 10^-7 d. 1.23 x10 ^-5
Results from liquid and plastic limit tests conducted on a soil are given below.Liquid limit tests: Plastic limit tests: PL = 19.1%a. Draw the flow curve and obtain the liquid limit.b. What is the plasticity index of the soil? c.Determine the liquidity index of the soil if Winsitu = 21%.
The given values are as follows: The specimen's e=0.46 length of soil specimen=450mm constant head difference=700mm Water collected in 3 minutes =3.54x10-4 m3 Area=2.26x10-3 m2 1) Find the coefficient of permeability (Ans. 2.012 m/hr) 2) Find the discharge velocity (Ans. 0.052 m/min) 3) Find the interstitial velocity (Ans. 0.165 m/min)
A sand-cone in place unit test was conducted on the field during the construction of a proposed embankment. The following data were obtained. moisture content=12.8% weight of sand to fill the funnel=320 g weight of wet soil from test hole=750 g unit weight of sand=15.4 kN/m3 weight of sand used to fill test hole and funnel of sand-cone device=870 g a) compute the wet unit weight of soil (Ans. 21.14 kN/m3) b) compute the dry unit weight of the compacted soil (Ans. 18.74 kN/m3) c) compute the relative compaction in the field if the maximum dry unit weight of the soil is 21.3 kN/m3. (Ans. 87.98%)
a. A vane shear test was conducted in a saturated clay. Theheight and diameter of the rectangular vane were 4 in.and 2 in., respectively. During the test, the maximumtorque applied was 230 lb ? in. Determine the undrainedshear strength of the clay.b. The clay soil described in part (a) has a liquid limit of58 and a plastic limit of 29. What would be the correctedundrained shear strength of the clay for design purposes?Use Bjerrum’s relationship for l [Eq. (3.40a)]. Determine the overconsolidation ratiofor the clay. Use Eqs. (3.42) and (3.45). Use s9o 5 1340 lb/ft2.
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120 mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the bottom of the sample. a. 364 b. 728 c. 182 d. 910
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the middle of the sample. a. 364 b. 910 c. 182 d. 728
A sand cone in place unit test was conducted on the field during the construction of the embanklment in CALAX. The following data were obtained in the field: Moisture content of soil from the test hole+ 12.8% ; Weight of sand to fill the funnel(cone) = 320g; Weight of weight soil from the test hole= 750g; Unit weight of sand= 15.4 kN/m3 and Weight of sand used to fill the test hole and thefunnel of sand-cone device=870 g. Compute for the dry unit weight of the compacted soil in kN/m3. a.17.80 b.18.74 c.20.08 d.21.14
During Atterberg limit tests in the soil mechanics laboratory, the students obtained the following results from a clayey soil.Liquid limit tests: Plastic limit tests: Students conducted two trials and found that PL = 17.2% for the first trial and PL = 17.8% for the second trial.a. Draw the flow curve and obtain the liquid limit.b. What is the plasticity index of the soil? Use an average value of PL from the two plastic limit trails.
Following are the results from the liquid and plastic limit tests for a soil. Liquid limit test: Plastic limit test: PL = 18.7%a. Draw the flow curve and obtain the liquid limit.b. What is the plasticity index of the soil? c. Determine the liquidity index of the soil when the in situmoisture content is 26%