Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the middle of the sample. a. 364 b. 910 c. 182 d.

Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the middle of the sample. a. 364 b. 910 c. 182 d.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.18P

See similar textbooks

Similar questions

Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120 mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the bottom of the sample. a. 364 b. 728 c. 182 d. 910
There is an upward flow of 0.06 ml/s through a sand sample with a coefficient of permeability 3 × 10–2 mm/s. The thickness of the sample is 150 mm and the cross-sectional area is 4500 mm2. Determine the effective stressat the bottom and middle of the sample, if the saturated unit weight of the sample, is 18.9 kN/m3.
In a sample of sand, water seeps at a volume of 158 cm3 in 7.89 minutes. If the seepage area and thickness of the specimen are 69 cm2 and 0.628 m, respectively, what is the permeability coefficient? The water has a head of 34 cm.
A glass container with pervious bottom containing fine sand in loose state (void ratio = 0.8) is subjected to hydrostatic pressure from underneath until quick condition occurs in the sand. If the specific gravity of sand particles = 2.65, area of cross-section of sand sample= 10 cm2 and height of sample = 10 cm, compute the seepage force in N acting from below. a. 9.17. b. 0.9 c. 0.45 d 7.29
The results of a constant-head permeability test for a fine sand sample having a diameter of 70 mm and a length of 140 mm are as follows (refer to Figure 7.5):• Constant-head difference = 550 mm• Water collected in 7 min = 450 cm3• Void ratio of sand = 0.8Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity
There is an upward flow of 0.06 ml/s through a sand sample with a coefficient of permeability 3 × 10^–2 mm/s. The thickness of the sample is 150 mm and the cross-sectional area is 4500 mm2.Determine the effective stress in N/m2 at the middle of the sample, if the saturated unit weight of the sample, is 18.9 kN/m3.
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
Plz give the correct answer. Compute the intensities of active and passive earth pressure at depth of 8 m in dry cohesionless sand with an angle of internal friction of 30 degrees , and unit weight of 18kN / (m ^ 3) What will be the intensities of active and passive pressure if the water level rises to the level? Take the saturated unit weight of sand as 22kN / (m ^ 3) .
The following data are for a falling-head permeability test:• Length of the soil sample = 150 mm• Area of soil sample = 1964 mm^2• Area of the standpipe = 25 mm^2• At time t = 0, head difference = 400 mm• At time t = 8 min, head difference = 200 mma. Determine the hydraulic conductivity of the soil (cm/sec). (ans. 2.75x10^-4 cm/s)b. What was the head difference at t = 6 min? (ans. 23.82cm)
A layer of sand 6 m thick lies beneath a clay stratum 5 m thick and above abed thick shale. In order to determine the permeability of sand, a well was driven to the top of the shale and water pumped out at a rate of 0.01m3/sec. Two observation wells driven through the clay at 15m and 30 m from the pumping well and water was found to rise to levels of 3m and 2.4 m below the ground water surface. Calculate the permeability of soil.
In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 1b/in2 and friction angle is 210 . Calculate the effective confining pressure at failure.? A) 21 1b/in2 B) 22.2 1b/in2 C) 25.4 1b/in2 D) 17.9 1b/in2
The results of a constant-head permeability test for a fine sand sample having a diameter of 150 mm and a length of 300 mm are as follows • Constant-head difference = 500 mm • Water collected in 5 min = 350 cm3 • Void ratio of sand = 0.61 Determine: a. Hydraulic conductivity, k (cm/sec) b. Seepage velocity