10A plate 0.05mm distant from a fixed plate moves at 1.25 m/s and required a force per unit area of 2.2 N/mto maintain this speed with using an oil of specific gravity 0.7. Find the dynamic viscosity and kinemätiC ViSCosity of the fluid between the plates. 1 (b) Calculate the specific weight, density, and the specific gravity of a liquid having a volume of 665600 cm and weight of 7B kN (ENTER ONLY THE VALUES BY REFERRING THE UNITS GIVEN) 1) The dynamic viscosity of the fluid (in Centipoise) The kinematic viscosity of the fluid (in stokes) 1 (b) Specific Weight in (KN/m') Density of liquid (in kg/m') Specific gravity of liquid

10A plate 0.05mm distant from a fixed plate moves at 1.25 m/s and required a force per unit area of 2.2 N/mto maintain this speed with using an oil of specific gravity 0.7. Find the dynamic viscosity and kinemätiC ViSCosity of the fluid between the plates. 1 (b) Calculate the specific weight, density, and the specific gravity of a liquid having a volume of 665600 cm and weight of 7B kN (ENTER ONLY THE VALUES BY REFERRING THE UNITS GIVEN) 1) The dynamic viscosity of the fluid (in Centipoise) The kinematic viscosity of the fluid (in stokes) 1 (b) Specific Weight in (KN/m') Density of liquid (in kg/m') Specific gravity of liquid

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An oil film of thickness 1.5 mm is used for lubrication between asquare plate of size 0.9 m × 0.9 m and an inclined plane having anangle of inclination 200. The weight of the square plate is 392.4 N andit slides down the plane with a uniform velocity of 0.2 m/s. Find thedynamic viscosity of the oil
a submarine is 100 m long, the shape of it hull is roughly cyli9ndrical with a diameter of 15 m. when it is submerged, it cruises at a speed of about 40 kdots or aproximately 20 m/s compute the reynald number, if the viscosity is 1.0x10^-3 pa-s
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N).
A hydrodynamic journal bearing is subject to 2000 N load at a rotational speed of 2000 rpm Both bearing bore diameter and length are 40 mm. If radial clearance is 20 um and bearing is lubricated with an oil having viscosity 0.03 Pa-s, find the Sommerfield number of the bearing.
Anoilring bearing of transmission shaft of 50 mm diameter in which journal rotates at 1450 rpm, radial clearance and bearing pressure are 20 µ and 4 N/mm². If Sommerfeld number is 0.0637, the viscosity of lubricant is
steel tape 0.5 mm thick and 20 mm wide is pulled by a force F through a slit opening 1.5 mm and length 15 mm. Considering that the tape is centered on the slit, that lubricating oil of viscosity µ = 0.4 Nm-2s? fills the gap spaces not occupied by the tape and that the maximum tape speed is 10 m/s, calculate the maximum force F. Expected Answer: Maximum Force = 4.8N
A Pipe used to transport an oil of specific gravity of 0.90 & 0.03poise at a Velocity of 1.6977m/s with a flow rate of 3cubic meter per second. A Pipe was used to conduct a test using water at 20 degree celsius with a velocity of 5.0931m/s. Find the diameter of the prototype. Viscosity of water at 20 degree celsius is 0.01poise
A hydrodynamic journal bearing is subject to 2000 N load at a rotational speed of 2000 rpm Both bearing bore diameter and length are 40 mm. If radial clearance is 20 um and bearing is lubricated with an oil having viscosity 0.03 Pa-s, what is the Sommerfield number of the bearing?
A skater weighing 500 N skates at 10 m/s and is supported by an average skating area of 10 cm2. If the viscosity of water is 1 centipoise and the coefficient of friction between skates and ice is 0.02, then find the thickness of thin film of water existing between the skates and the ice. Follow the methodologies in solving the problem; Given : Required: Schematic Diagram: Solution:
Calculate pressure loss in a pipe ( d = 55 mm, L = 200 m ), for oil mass flow rate of 133 kg/min. Oil density is 900 kg/m3and kinematic viscosity is ν = 4·10-5 m2/s. The sum of local losses in the pipe is 3,5. Round off the answer to one decimal digit in kPa, but enter the answer without the unit.
A square block weighing 1.1 KN and 250 mm on an edge slides down an 20 degrees inclined on a film of oil 6.0 micrometer thick. Assuming a linear velocity profile in the oil, what is the terminal speed of the block in m/s. The viscosity of the oil is 7 mPa-s.
A- Womersley number (a) of a human aorta is 20 and for the rabbit aorta is 17, the blood density is approximately the same across the species. The values of viscosity were 0.0035 Ns/m² for the human and 0.0040 Ns/m² for the rabbit. The diameter of the aorta is 2.0 cm for the man, and 0.7 cm for the rabbit, estimate the heart rate beats per minute (bpm) for both species