11.2 In a CAES for a 150-MW peaking compressor/gas turbine facility, the two-stage compressor operates with air intake at 20°C and 1 bar and air discharge at 49 bars. Air IC occurs at a pressure of 7 bars back to the intake temperature. The compressed-air storage cavern charging period duration is 5 h. The HP portion of the gas turbine operates with a CC that burns natural gas with an HV of 50 MJ/kg; thereby, the compressed-air temperature increases to 1100°C. After expansion in the HP part of the turbine to a pressure of 7 bars, the gas is reheated to 1100°C. Subsequently, the air expands in the LP part of the turbine to the pressure of 1 bar. The isentropic efficiencies of compressor and turbine are 0.86 and 0.89, respec- tively. The isobaric specific heat of air/gas is 1.05 kJ/(kg K), the isentropic exponent k is 1.4. Determine (a) the total fuel consumption rate of combus- tor and reheater, (b) the storage cavern volume, and (c) the average air flow rate during the 5-h cavern charging period.

11.2 In a CAES for a 150-MW peaking compressor/gas turbine facility, the two-stage compressor operates with air intake at 20°C and 1 bar and air discharge at 49 bars. Air IC occurs at a pressure of 7 bars back to the intake temperature. The compressed-air storage cavern charging period duration is 5 h. The HP portion of the gas turbine operates with a CC that burns natural gas with an HV of 50 MJ/kg; thereby, the compressed-air temperature increases to 1100°C. After expansion in the HP part of the turbine to a pressure of 7 bars, the gas is reheated to 1100°C. Subsequently, the air expands in the LP part of the turbine to the pressure of 1 bar. The isentropic efficiencies of compressor and turbine are 0.86 and 0.89, respec- tively. The isobaric specific heat of air/gas is 1.05 kJ/(kg K), the isentropic exponent k is 1.4. Determine (a) the total fuel consumption rate of combus- tor and reheater, (b) the storage cavern volume, and (c) the average air flow rate during the 5-h cavern charging period.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rateof 5 m3/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Determine the rate of heat transfer to the air passing through the combustor, in kW.
A regenerative gas turbine with intercooling and reheat operates at steady state. Air enters the compressor at 100 kPa, 300 K with a mass flow rate of 5.807 kg/s. The pressure ratio across the two-stage compressor is 10. The pressure ratio across the two-stage turbine is also 10. The intercooler and reheater each operate at 300 kPa. At the inlets to the turbine stages, the temperature is 1400 K. The temperature at the inlet to the second compressor stage is 300 K. The regenerator effectiveness is 80%. Determinethe thermal efficiency.
1. A reheat cycle with two stages of reheating is executed with steamexpanding initially from 90 bar and 530°C. The two reheaterpressures are 10 bar and 0.6 bar, and the steam leaves eachreheater at 480°C.Condensation occurs at 0.03 bar. Find the cycleefficiency.2. An ideal reheat turbine with one stage of reheat receives steam at8.0 MPa and 480°C. Reheat pressure is 0.83 MPa and exhaustpressure is 0.007MPa. The work is 1559 KJ/kg and thermalefficiency is 41%. Find the temperature of the steam leaving thereheater.
My Question: In the steam power plant of problem #1, the reheater developed a leak and it was decided to run the plant bypassing the reheater at 1 bar. Determine the thermal efficiency and boiler capacity to develop the same power output.Problem#1. In a Reheat Cycle steam enters the turbine @ 40 bar and 400 C. It expands isentropic ally to 6 bar and is reheated at constant pressure to 400 C. This steam expanded isentropic ally to 1bar and is reheated at constant pressure to 200 C. Finally this steam is expanded isentropic ally in the condenser pressure of 0.1 bar. Determine the thermal efficiency and the capacity of the boiler if 10,000 KW of power output is required.
Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 300 K, with a volumetric flow rate of 0.90 m3/s, and is compressed to 430 kPa. The temperature at the turbine inlet is 330 K. Determine: (a) The net power input, in kW (b) The refrigerating capacity, in kW. (c) The coefficient of performance. (d) The coefficient of performance of a reversible refrigeration cycle operating between reservoirs at TC = 300 K and TH = 330 K.
In a gas turbine plant working on air standard Brayton cycle, the air at inlet is at 27°C temperature ,0.1 MPa pressure respectively.The pressure is 6.25 and maximum temperature is 800° C the turbine and compressor efficiencies are each 80%. Find per kg of air; i) The compressor work ii)The turbine work iii) The cycle efficiency iv) The turbine exhaust temperature
An ideal regenerative cycle is executed with steam generation at 10 MPa and 600 deg C. Before condensation at 0.005 MPa, steam is extracted for feedwater heating first at 2.5 MPa and second at 0.6 MPa. On the basis of 1 kg of throttle steam, find:a. m1 and m2 in kg/kgb. ec in percentc. ee in percent Reminder:1. For values taken from the steam tables: Use them as is, do not round off.2. For values obtained by interpolation and final answers obtained by solving, use FOUR (4) decimal places.PLEASE USE THIS STEAM TABLE:https://docs.google.com/document/d/1wUPYkDmHnCMBEuLRMRTGEfz4D5kkohT4/edit
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 27 °C, with a volumetric flow rate of 5 m3/s. The compressor pressure ratio is 5. The turbine inlet temperature is 1127 °C. Assume cold-air analysis, determine the back work ratio.
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rateof 5 m3/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. The thermal efficiency is 45.7%, back work ratio is 39.6%, net power delivered is 2481 kW. Determine the rate of heat transfer to the air passing through the combustor, in kW.
an ideal reheat turbine with one stage of reheat receieves steam at 8 mpa, 480 degrees celsius. reheat pressureis 0.83 mpa and exhaust pressure is 0.0007 mpa. determine A) heat added B) effeciency cycle C) energy chargable D) engine thermal effeciency
An Otto cycle begins its compression at 94kPa, 1230cm^3 and 11degC. The dispalacement volume and maximum temperature within the cycle is 1090cm^3 and 920degC and respectively. Utilizing air standard assumptions, determine the: a. heat addition and Wnet (kJ) b. thermal efficiency (%)c. mean effective pressure (kPa) Consider the cycle as a model of the process in each cylinder of a spark-ignition engine. Show the T-s and P-v diagrams when solving. Note that specific heats are not constant
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 27 °C, with a volumetric flow rate of 5 m3/s. The compressor pressure ratio is 5. The turbine inlet temperature is 1127 °C. Assume cold-air analysis, determine the net power developed of the cycle.