7. A turbine with one bleeding for regenerative heating of feed water is admitted with steam having enthalpy of 3200 kJ/kg and the exhausted steam has an enthalpy of 2200 kJ/kg. The ideal regenerative feed water heater is fed with 11350 kg/h of bled steam at 3.5 bar (whose enthalpy is 2600 kJ/h). The feed water (condensate from the condenser) with an enthalpy of 134 kJ/kg is pumped to the heater. It leaves the heater dry saturated at 3.5 bar. Determine the power developed by the turbine. JAns. 16015 kW)

7. A turbine with one bleeding for regenerative heating of feed water is admitted with steam having enthalpy of 3200 kJ/kg and the exhausted steam has an enthalpy of 2200 kJ/kg. The ideal regenerative feed water heater is fed with 11350 kg/h of bled steam at 3.5 bar (whose enthalpy is 2600 kJ/h). The feed water (condensate from the condenser) with an enthalpy of 134 kJ/kg is pumped to the heater. It leaves the heater dry saturated at 3.5 bar. Determine the power developed by the turbine. JAns. 16015 kW)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A turbine with one extraction for regenerative feedwater heating, receives steam with an enthalpy of 3373 kJ/kg and discharges it with an exhaust enthalpy of 2326 kJ/kg. The ideal regenerative cycle feedwater heater receives 11338 kg/h of extracted steam at 345 kPa (whose h = 2745 kJ/kg). The feedwater (condensate from the condenser) enters the heater with an enthalpy of 140 kJ/kg and departs saturated at 345 kPa (hf = 582 kJ/kg). Calculate the turbine output in kW
Steam enters the turbine of a simple vapor power plant with a pressure of 10 MPa and temperature T, and expands adiabatically to 6 kPa. The isentropic turbine efficiency is 85%. The saturated liquid exits the condenser at 6 kPa and the isentropic pump efficiency is 82%. (a) For T = 580°C, determine the turbine exit quality and the cycle thermal efficiency. (b) Plot the quantities of part (a) versus T ranging from 580 to 700°C.Note: Please produce a concise, workable solution that includes all of the necessary details and explanations. Thank you so much; if the wish is fulfilled, I'll hit "like" right away.
A turbine with one extraction for regenerative feedwater heating, receives steam with an enthalpy of 3373 kJ/kg and discharges it with an exhaust enthalpy of 2326 kJ/kg. The ideal regenerative feedwater heater receives 11,338 kg/h of extracted steam at 345 kPa (whose h= 2745 kJ/kg). The feedwater (condensate from the condenser) enters the heater with an enthalpy of 140 kJ/kg and departs saturated at 345 kPa (h=582 kJ/kg). Find the work turbine output in kW.
Superheated steam (s. fig. C) at a pressure of 300 bar and a temperature of 550 ℃ enters a turbine made up of two stages. Steam exits the first stage of the turbine at 35 bar and gets reheated at a constant pressure at 550 ℃. Each stage of the turbine has an isentropic efficiency of 80%. The isentropic efficiency of the pump is 85%. The pressure of the condenser is 10 kPa. (a) Sketch the cycle in a T-s diagram and calculate the enthalpy at each point of the cycle. (b) Calculate the flow rate of the working fluid if the power output of the turbine is 100 MW. (c) Calculate the thermal efficiency of the cycle. (d) Double check the result for the heat rejected in the condenser.
A steam power plant with a closed feedwater Heater operates on a regenerative Rankine cycle with reheating. Steam enters the turbine at 8 MPa pressure and 5YX C temperature, 1Y kg/s flow rate, and condenses in the condenser at 2X kPa pressure. The intermediate heating is condensing at a pressure of 3 MPa. Intermediate heating is done at a pressure of 3 MPa and the steam is heated to a temperature of 5X0 C. Some steam is separated from the low pressure turbine at a pressure of 1 MPa, after it is completely condensed in the closed feed water heater, it is pumped to a pressure of 8 MPa before mixing with the feed water at the same pressure. Assuming the isentropic efficiencies of the turbines and pumps are 8Y.X%, calculate (a) the temperature of the steam at the inlet of the closed feedwater heater, (b) the mass flow rate of the steam leaving the turbine for the closed feedwater heater, (c) the net power, and (d) the thermal efficiency.note: x=2,y=7
In a Reheat Cycle steam enters the turbine @ 40 bar and 400 C. It expands isentropic ally to 6 bar and is reheated at constant pressure to 400 C. This steam expanded isentropic ally to 1 bar and is reheated at constant pressure to 200 C. Finally this steam is expanded isentropic ally in the condenser pressure of 0.1 bar. Determine the thermal efficiency and the capacity of the boiler if 10,000 KW of power output is required.
In a Thermal Power Plant with a Rankine cycle, superheated steam at 50 bar and 500°C enters the turbine, its isentropic efficiency is 0.8. The condenser that is operating at 0.05 bar delivers saturated liquid to a feed pump, its isentropic efficiency is 0.7. Determine the thermal efficiency of the Power Plant and the mass flow of steam required to generate 50 MW of net power.
A simple vapor compression cycle uses ammonia as a refrigerant. The vaporizing and condensing temperature are -20°C and 35°C, respectively. The system is to be used in producing 10,000 kg of ice at -15°C from water at 25°C in 25 hours. The specific heat of ice is 2.094 kJ/kg-K and the heat of fusion is 335 kJ/kg. Assume that there are 30 percent losses of the heat to be absorbed from the water. Determine the mass of the refrigerant that circulates in the system in kg/s. (Use h₂ = 1735 kJ/kg)
Steam enters the turbine of a simple vapor power plant with a pressure of 12 MPa and a temperature of 600°C and expands adiabatically to condenser pressure, p. Saturated liquid exits the condenser at pressure p. The isentropic efficiency of both the turbine and the pump is 84%. a. For p = 30 kPa, determine the turbine exit quality and the cycle thermal efficiency. b. Plot the quantities of part (a) versus p ranging from 6 kPa to 100 kPa.
Question 4 a) A power plant based on the ideal Rankine cycle has a net power output of 10 MW.Superheated steam enters the turbine at 10 MPa, 500 (Degree)C. The condenser pressure is 15 kPa.Determine:i) the mass flow rate of the steam.ii) the rate of heat input to the cycle.iii) the thermal efficiency.
Need help with this engineering problem. Steam enters the turbine of a simple vapor power plant with a pressure of 12 MPa and a temperature of 500°C and expands adiabatically to condenser pressure, p. Saturated liquid exits the condenser at pressure p. The isentropic efficiency of both the turbine and the pump is 84%.For p = 100 kPa, determine: (a) the turbine exit quality, in percent.(b) the cycle thermal efficiency, in percent.
Q.8 In a regenerative steam cycle employing one open feed heater, the steam is supplied to the turbine as dry saturated at 40 bar, and exhausted to the condenser at 0.35 bar. The intermediate bleed pressure is 10 bar. Sketch the layout of the plant and show on the temp | entropy diagram the pressure under gone by the steam, neglecting the pump works, calculate: A. The mass of steam bled from the turbine per Kg of steam leaving the boiler. B. The thermal efficiency of the plant. C. The thermal efficiency of the plant without feed heating. D. The heat rate in (kJ/kW.hr) for the plant with and without feed heating.