None 14. 10. A 3 kg of air at 150 kPaand 10°C is contained in a gas-tight, frictionless piston-cylinder device. The finalpressure of air aftercompression is 650 kPa. Duringthe process, heat is transferredfrom the air such that thetemperature inside the cylinderremains constant. The initialspecific volume is *greater than 1less than 1equal to 0.5non of the above

Given:m=3 KgP1=150 KPaT1=10°CP2=650 KPa

14. 10. A 3 kg of air at 150 kPa and 10°C is contained in a gas- tight, frictionless piston- cylinder device. The final pressure of air after compression is 650 kPa. During the process, heat is transferrec from the air such that the temperature inside the cylinde remains constant. The initial

14. 10. A 3 kg of air at 150 kPa and 10°C is contained in a gas- tight, frictionless piston- cylinder device. The final pressure of air after compression is 650 kPa. During the process, heat is transferrec from the air such that the temperature inside the cylinde remains constant. The initial

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Hot water at 400kPa, 150 deg Celsius is fed to a throttle at a rate of 1.5kg/s and exits at 200kPa.…

A: Pressure(P1)= 400KPa Inlet Flow rate (m.1)= 1.5 kg/sec Pressure (P2)= 200 KPa

Q: E.3) There is a steam system in which the boiler must be fed by using a pump that supplies 0.005…

Q: 3- In a steam nozzle, dry and saturated steam is expanded from 10 bar to 0.1 bar. Using steam…

Q: B. Pure Substance Processes 1. A prototype boiler that contains 5 kg of saturated steam at a…

Q: the entropy of saturated vapour

A: Given; A closed system contains , m=10 kgLiqquid ammonia at=100 CConstant pressure,o=16.2 MJIf the…

Q: If 15 m'/sec. of air at 32 cab and 24'Cwb at standard atmospheric pressure enter a cooling tower and…

A: Air flow rate, V˙air=15 m3/sAir inlet condition: Tin,db=32oC, Tin,wb=24oCAir outlet…

Q: QI/ A volume of the vessel A is 0.3 m' contains ammonia at 25 °C, 90% quality. The pressure of…

Q: Steam at 7 bar, dryness fraction 0.96, is throttled-down to 3.5 bar. Solve for the change of entropy…

Q: Question 1- Steam expands in a steam turbine steadily at a rate of 32,000 kg/h, that enters the…

A: Given that, steam mass flow rate ,m˙=32000 kg/h At the turbine inlet , the pressure P1=7MPa the…

Q: a desuperheater insulated unit (figure F) converts the inputs into a saturated vapor stream.…

Q: A) There is a steam system in which the boiler must be fed by using a pump that supplies 0.005 m³/s…

Q: opened and argon flows into B and eventually reaches a uniform state of 150 kPa, 30°C throughout.…

Q: At the start of the compression process in the reciprocating compressor of refrigeration plant the…

A: Given data :- Start of compression = 1.5 bar PV1.2 = constant P2 = 6.5 bar Find :- @ change of…

Q: Air is compressed from 14.7 psia, 70 ° F, to 50 psia, 250 ° F by a centrifugal compressor at a rate…

Q: There are required 1902.3 kW of compressor power to handle air adiabatically from 1 atm, 26.7 C to…

Q: a) Draw the process on the PV diagram and explain the changes of pressure and volume durin the…

A: Pneumatic: The pneumatic is the system in which the pressurized air used for the applications. The…

Q: The following information is known about the steady flow of methane through a horizontal insulated…

Q: A 400-L tank, A contains argon gas at 250 kPa, 30°C. Cylinder B, having a frictionless piston of…

Q: In a cycle, a 4kg ideal gas (MW=3g/mol and k=2.3) confined in a controlled mass system went through…

A: Lets find the characteristic gas constant R and specific heat at constant volume (Cv) and specific…

Q: A container with a constant volume of 1.9 m³ initially contains air at a pressure of 100 kPa and a…

A: Given data:

Q: Problem (4.3): 1 kg of air is allowed to expand reversibly in a cylinder behind a piston in such a…

A: Given data: The mass of air, m = 1 kg. The temperature, T = 260oC. The initial volume, V1 = V. The…

Q: a turbine at 1100 kpa , dry and saturated . The steam is exhausted from the turbine at 200 kpa and…

Q: Steam at 1200 kPa with a specific enthalpy of 1200kJ/kg flowed through a throttling valve, its…

Q: B) There is a steam system in which the boiler must be fed by using a pump that supplies 0.005 m³/s…

Q: (a) Sketch the cycle on a 7-s diagram being sure to label the state points and indicate the relative…

A: Given that: The cycle is a Carnot cycle. Working fluid is R134a. Mass = 0.8 kg. Maximum temperature…

Q: Q) A & B are rigid tanks. Tank A has volume of 1 m , contains steam with 4 MPa and 500 °C heated by…

Q: Vaporsat enters a throttling valve at 0.42 MPa and leaves at 0.69 MPa. What is the state and…

A: Answer: (a) The temperature of the exit stream is 164.356 ℃. (b) The state of the exit stream is…

Q: Problem #3: Assume air is an ideal gas with variable specific heat, and that the reference…

A: Given data: To = 0 °C = 273 KP0 = 101.325 kPaandu0 = h0 = s0 = 0 from ideal gas equation P0v0 =…

Q: How many kJ/min is required to produce 10 metric tons of ice per day at-10°C from steam at 100°C?

Q: Q1// A closed rigid system has a volume of 80 litres contains steam at 2 bar and dryness fraction of…

Q: Steam at 5 bar and 450 °C is contained in a rigid vessel of volume 2 m3. The vessel is cooled until…

Q: Q6) A stream of water at 85°C, flowing at the rate of (5 kg. s is formed by mixing water at 24°C…

Q: How many kJ/min is required to produce 10 metric tons of ice per day at -10°C from steam at 100°C?

Q: 5.1.7- A vapor at 1.7 MPa, 250 °C and with a velocity of 110 m/s enters a group of twelve (12)…

Q: The entropy of an ideal gas depends on both T and P. The function s° represents only the…

A: Given: Entropy of an ideal gas depends on both temperature and pressure. Entropy is the measurement…

Q: Q1/ Find the equation for the work of a reversible, isothermal compression of ! mol of gas in a…

Q: A mechanical-draft cooling tower receives 115 m3 /sec of atmospheric air at 103 kPa, 32oC DB…

A: The given system is as shown below, Calculate specific humidity at the inlet of air, Calculate…

Q: 2-An automobile wheel contains air with a pressure of 3x10 'Pa at 25 ° C. The sipop cover was…

A: Equilibrium is a state of a body at which there is no disturbance in a system neither inside nor…

Q: B-A refrigerant-134a is compressed polytropically from 2 bar dry saturated to 10 bar and 60 °C.…

Q: An insulated nozzle has saturated water vapor at 1000 kPa entering with a velocity of 100 m/s and at…

A: It is given that P1 = 1000 kPa. V1 = 100 m/s. Saturated water vapor mixture enters the nozzle. P2 =…

Q: Steam at 10 MPa, 500 oC enters an ideal engine that has one stage of reheat; exhaust is at 50 kPa…

A: Note: As per our guidelines we are supposed to answer only the first 3 sub-parts. Kindly repost…

Q: Refrigerant 134a, to the evaporator of a refrigeration machine at 160 kPa pressure enters as a…

A: The entropy of mixture at 160 kPa and -5 degree, s1 = 1.7015 kJ/kg The entropy of saturated steam at…

Q: Q1/ A volume of the vessel A is 0.3 m³ contains ammonia at 25 °C, 90% quality. The pressure of…

A: Introduction: In this problem, we will use the first rule of thermodynamics to compute heat…

Q: For a pressure of 400 KPa and phase description compressed liquid, The enthalpy in KJ/Kg is

A: Ans .1 Using the steam table for saturated steam At Psat=400KPa=0.4MPa hf=604.66 KJ/Kg Hence the…

Q: A pressure cooker 6 ltr

A: Given data: Volume of cooker = volume of water (liquid-vapor mixture) = 6 lit=6×10-3 m3. Mass of…

Q: An ideal gas initially at one atmosphere is ___ (?) reversibly to two atmosphere while in thermal…

A: Given: Ideal gas P1=1 atm P2=2 atm Temperature constant To Find: (i) heat Q (ii)∆S

Q: In a cycle, a 4kg ideal gas(MW=3g/mol and k=2.3) confined in a controlled mass system went through…

A: For solution refer below images.

Q: A piston/cylinder arrangement initially contains air at 150 kPa, 400°C. The setup is allowed to cool…

A: Given data at state 1 P1 = 150 kPa T1 = 400oC = 400 + 273 = 673 K at state 2 T2 = To = 20oC = 20 +…

Concept explainers

Buckling of columns

The column is described as a vertical member of the structure that carries an axial compressive load, and buckling is a lateral deformation of the column under the application of load.

Question

None

14. 10. A 3 kg of air at 150 kPa
and 10°C is contained in a gas-
tight, frictionless piston-
cylinder device. The final
pressure of air after
compression is 650 kPa. During
the process, heat is transferred
from the air such that the
temperature inside the cylinder
remains constant. The initial
specific volume is *
greater than 1
less than 1
equal to 0.5
non of the above

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

What is the change in entropy when 120 g of superheated methanol gas at 1.00 bar and 110.0 °C is cooled and condensed to liquid methanol at 1.00 bar and 90.5 °C?
At 645.3 kPa and 151.2°C, steam leaves an industrial boiler. When the calorimeter pressure reaches 104.3 kPa, a part of the steam is fed through a throttling calorimeter and expelled to the atmosphere. If the steam temperature at the calorimeter is 113.8°C, a. how much moisture is exiting the boiler container? b. If the mass of the saturated liquid is 15 kg, calculate the mass of the saturated vapor. @ 645.3 kPa and 151.2°C: hf = 624.56 kJ/kg hfg = 2123.3 kJ/kg @ 104.3 kPa and 113.8°C: h2 = 2506.7 kJ/kg
Write down the equation for macroscopic entropy change ∆S in a process taking a system between equilibrium states a and b in terms of infinitesimal heat flow and the temperature at which it occurs.
Establish the increase of entropy principle.
3. Using the steam tables, determine the specific enthalpy, specific volume and specific enthropy for steam at 2800 KPa and at a temperature of 390 C.c. The steam in question 3 above is compressed at a constant enthalpy to a pressure of 4700 KPa. What is the final temperature, specific enthalpy, specific volume and specific entropy of the steam in this new state?d. What is the change in specific enthalpy, specific volume, temperature and specific entropy?
Determine the temperature change undergone by an air as an ideal gas whenexpanding in the turbine adiabatically and irreversibly through a pressure ratio of 5 from an initial pressure of 700 kPa and temperature of 727°C according to the law pv'? =C. Assume Cp = 1.0035 kJ/kg.K and k = 1.4.
Calculate the change of entropy(a) of a bath containing water, initially at 20 ◦ C,when it is placed in thermal contact with a verylarge heat reservoir at 80 ◦ C,(b) of the reservoir when process (a) occurs,(c) of the bath and of the reservoir if the bath isbrought to 80 ◦ C through the operation of a Carnotengine between them.The bath and its contents have total heat capacity10^4 J/K .
Using the steam tables, determine the specific enthalpy, specific volume and specific enthalpy for steam at 2800 KPa and at a temperature of 390 C.c. The steam in the question above is compressed at a constant enthalpy to a pressure of 4700 KPa. What is the final temperature, specific enthalpy, specific volume and specific entropy of the steam in this new state?d. What is the change in specific enthalpy, specific volume, temperature and specificentropy?
Entropy of the mixture?
Using the steam tables, determine the specific enthalpy, specific volume and specific enthalpy for steam at 2800 KPa and at a temperature of 390 C. c. The steam in question 3 above is compressed at a constant enthalpy to a pressure of 4700 KPa. What is the final temperature, specific enthalpy, specific volume and specific entropy of the steam in this new state?d. What is the change in specific enthalpy, specific volume, temperature and specific entropy?
Question 3 Under ideal conditions, if the inlet velocity is zero, the velocity of steam in m/s at the outlet outlet of a nozzle for a enthalpy drop of 427 kJ/kg from the inlet reservoir condition up to the exit is..........
An industrial dehumidifier accepts 50 kmol/hour of moist air with a dewpoint of 20 degrees Celsius. Conditioned air leaving the dehumidifier has a dewpoint temperature of 10 degrees Celsius. At what rate (kg/hour) is liquid water removed in this steady-flow process? Assume P is constant at 1 atm.