2 A rectangular beam has b=320 mm and d=470 mm. The beam will be designed to carry a service dead load of 235 kN-m and service live load of 195 kNm. Compression reinforcement if necessary will have its centroid 70 mm from extreme concrete fiber. Determine the required steel area, Use fe=30 Mpa and 1, = 415 Mpa. Ans: A's= As =

2 A rectangular beam has b=320 mm and d=470 mm. The beam will be designed to carry a service dead load of 235 kN-m and service live load of 195 kNm. Compression reinforcement if necessary will have its centroid 70 mm from extreme concrete fiber. Determine the required steel area, Use fe=30 Mpa and 1, = 415 Mpa. Ans: A's= As =

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular beam has b = 300 mm and d = 600 mm. Concrete compressive strength f'c 20.7 MPa and steel yield strength fy = 415 MPa. If compression steel is required, it shall be 60 mm from the extreme compression fiber. Factored moment is Mu = 950 kN-m. Solve for the value of As.
A doubly reinforced beam, which have a base of 310 mm, and an effective depth of 410 mm, is reinforced with steel area of 2263 sq. mm at the bottom, and 1232 sq. mm on the top. Take d' = 70 mm, fc' = 21 MPa, and fy = 345 MPa. b) What is the value of fs' (actual stress of the compression bars)
A doubly reinforced concrete beam has a max. effective depth of 630mm and is subjected to a factored moment of 1062 kn-m (including its own weight). fºc=27.58 MPa, fy = 413.4 MPa. Use 62.5 mm steel covering. 1. Determine the width of the beam. 2. Determine the reinforcement for compression. 3. Determine the reinforcement for tension.
A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 21 MPa and steel yield strength fy = 415 MPa for 20-mm bars and fy = 275 MPa for 16-mm bars. 1. Determine the tensile steel ratio for positive bending. 2. Determine the depth of the uniform rectangular stress block on the beam section at ultimate stage when subject to positive bending. 3. Determine the design moment capacity in kN•m of the beam in positive bending.
A rectangular beam has a width of 280 mm and an effective depth of 500 mm. It has a reinforcement area of 4072 sq. mm at the bottom. fc' = 25 MPa, fy = 414 MPa. c) Determine the value of "Mu"
Show step by step, please Determine the factored uniform line load, wu, acting on girder HK.
A cantilever beam with length of 3.2 m is reinforced with As=5720 mm^2 tension reinforcement and compression reinforcement A's =1905 mm^2 placed at 60 mm from extreme compression fiber. The effective depth is 550 mm and width of 400 mm. Use f'c=35 MPa and fy=415 MPa. 1. Calculate the magnitude of the neutral axis. 2. Determine the compressive force of the section. 3. Determine the safe concentrated live load that can be placed at the free end if the beam carries a total ultimate uniform load of 35 kN/m.
32 A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 21 MPa and steel yield strength fy = 280 MPa for 20-mm bars and fy = 230 MPa for 16-mm bars. Determine the maximum steel ratio if the beam is singly reinforced in positive bending with the given material strengths and the tensile strain is limited to 0.004 upon crushing of concrete. Write the answer in 5 decimal places only.
Question 33 A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 21 MPa and steel yield strength fy = 350 MPa for 20-mm bars and fy = 275 MPa for 16-mm bars. Determine the maximum steel ratio if the beam is singly reinforced in negative bending with the given material strengths and the tensile strain is limited to 0.004 upon crushing of concrete. Write the answer in 5 decimal places only.
A rectangular beam has a width of 330 mm and an effective depth to the centroid of the tension reinforcement of 432.5 mm. The tension reinforcement furnished is 7- 28 mm dia. bars and that for compression reinforcement is 4- 22 mm dia. bars placed 62.5 mm from the compression face of the beam. fy = 410.3 MPa and f'c = 35.9 MPa. Answer the following: (1) Determine the depth of the compression block. (2) Determine the design strength using 0.90 as the reduction factor. (3) Determine the concentrated live loads at the midspan in addition to the dead load of 19.7kN/m including the weight of the beam if it has a span of 9 m.
A rectangular reinforced concrete beam exposed to earth has a total depth of 600 mm and a width o 350 mm. It is reinforced with 3- 22 mm diameter bar (fy' = 315 MPa) in compression and 5 - 25 mm diameter bar in tension (fy= 345 MPa). fc' = 28 MPa a. determine the effective depth of the beam b. determine the depth of compression block c. check if steel yields for both tension and compression reinforcement d. determine the ultimate capacity of the beam
A floor systtem consist of a 75 mm concrete slab supported by continuous T beams with a span of 4.3 m spaced at 3 m on center. The beams have a web width, bw and effective depth, d. Calculate the necessary reinforcement for a typical interior beam if the applied factored load is 574 kN-m. Solve the following given a. ) bw = 400 mm; d = 500 mm; fy = 420 MPa; fc' = 28 MPa b. ) bw = 350 mm; d = 470 mm; fy = 420 MPa; fc' = 21 MPa