2. A 15 mm diameter jet of water impinges normally at the centre of rectangular plate of size 100 mm x 100 mm x 4 mm with a velocity of 5 m/s. The top edge of the plate is hinged. Determine the force required to apply at the bottom edge to keep the plate vertical. What would be the angle by which the plate is deflected in the absence of resisting force? The density of plate material 3 is 7850 kg/m².

2. A 15 mm diameter jet of water impinges normally at the centre of rectangular plate of size 100 mm x 100 mm x 4 mm with a velocity of 5 m/s. The top edge of the plate is hinged. Determine the force required to apply at the bottom edge to keep the plate vertical. What would be the angle by which the plate is deflected in the absence of resisting force? The density of plate material 3 is 7850 kg/m².

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The pipe bend shown is in a horizontal plane. Oil with a specific gravity of 0.86 enters the reducing bend at section A with a velocity of 3.2 m/s and a pressure of 150 kPa. Determine(a) Thevelocity(m/s)atsectionB.(b) Thepressure(kPa)atpointB.(c) FP (x-direction),(d) FP (y-direction),(e) The magnitude and direction of FRX of the force required to hold the bend in place.(f) The magnitude and direction of FRY of the force required to hold the bend in place.Forces are to be expressed in Newtons.
A cylindrical vessel 3m high and 1.50 m diameter is filled with water to a depth of 2.50m. In its side is a 50mm circular orifice C=0.60 placed 30 cm above the bottom of the vessel. If the vessel be rotated about its own axis at 60 rpm and the water is allowed to escape through the orifice for a period of 3 minutes, compute thea. Difference in elevation of the water surface at the center and at the periphery of the tank at this instant.b. Volume of water dischargedc. How deep will the water stand in the vessel if brought to rest?
An 8-cm-diameter horizontal water jet having a velocity of 35 m/s strikes a vertical stationary flat plate. The water splatters in all directions in the plane of the plate. How much force is required to hold the plate against the water stream?
two vertical parallel glass plates 0.1 mm apart are partially immersed in water. Considering that the water does not reach the upper edges of the sheets and that the liquid completely wets the glass, determine: a) the height that rises in the flat capillary, b) the attractive force between the plates. Consider the width of the sheet l=12cm and density y=72.8*10^-3 N/m
A vertical cylindrical container contains 5840 gallons of gasoline and is 1.53 m in radius. Due to evaporation within the tank, the pressure on the top of the fluid is 2.5 times normal atmospheric pressure. The density of gasoline is 737 kg/m3. a. What is the pressure at the bottom of the tank? b. If a nozzle at the bottom of the tank is used to let fuel out, with what velocity would the gasoline exit the hole? c. If a nozzle at the bottom of the tank is used to let fuel out, what volume flow rate will result if the diameter of the hole is 1.2 cm? d. At what initial rate will the height of the fuel level in the tank drop as fuel is removed?
Water enters vertically and steadily at a rate of 10 L/s into the sprinkler shown. Both water jets have a diameter of 1.2 cm. Disregarding any frictional effects, determine (a) the rotational speed of the sprinkler in rpm and (b) the torque required to prevent the sprinkler from rotating
Find the force exerted by a jet of water of diameter 75 mm on a stationary flat plate, when the jet strikes the plate normally with velocity of 20 m/s.
If a jet is inclined upward 30O from the horizontal, what must be itsvelocity to reach over a 3-m wall at a horizontal distance of 18 m,neglecting friction?
Two horizontal plates are spaced 3 in. apart. The spacebetween the plates is filled with mercury at 90 ° F . The upper plateis moving at 3 ft /sec, (a) Why does the liquid velocity vary linearly between the plates ? (b ) Calculate the shear stress at a plane 1 in. from the slowermoving plate.(c) Calculate the momentum flux at the surface of the fastermoving plate.
Q6) The space between two parallel plates is filled with oil. Each side of the plate is 60 cm. the thickness of oil film is 12.5 mm. The upper plate, which moves at 2.5 metre per sec requires a force of 98.1 N to maintain the Speed. Determine
A pipe whose axis is horizontal, is full of water in motion. At a section A, the velocity of water is recorded as 54000dm/hrandd the pressure is equilavent tp 14.07m of water. if the pipe tapers gradually from 150mm diameter to A to 100mm diameter at B. determine the preesure at B.
The bottom quarter of a vertical cylindrical tank of total height 0.4 m and diameter 0.3 m is filled with a liquid (SG > 1, like glycerin) and the rest with water, as shown in the figure. The tank is now rotated about its vertical axis at a constant angular speed of ω. Determine (a) the value of the angular speed when the point P on the axis at the liquid-liquid interface touches the bottom of the tank and (b) the amount of water that would be spilled out at this angular speed.