2.34 Carbon monoxide gas (CO) contained within a piston- cylinder assembly undergoes three processes in series: Process 1-2: Constant pressure expansion at 5 bar from V₁ 0.2 m³ to V₂ = 1 m³. -- - Process 2-3: Constant volume cooling from state 2 to state 3 where p3= 1 bar. Process 3-1: Compression from state 3 to the initial state during which the pressure-volume relationship is pV = constant. Sketch the processes in series on p-V coordinates and evaluate the work for each process, in kJ.

2.34 Carbon monoxide gas (CO) contained within a piston- cylinder assembly undergoes three processes in series: Process 1-2: Constant pressure expansion at 5 bar from V₁ 0.2 m³ to V₂ = 1 m³. -- - Process 2-3: Constant volume cooling from state 2 to state 3 where p3= 1 bar. Process 3-1: Compression from state 3 to the initial state during which the pressure-volume relationship is pV = constant. Sketch the processes in series on p-V coordinates and evaluate the work for each process, in kJ.

Automotive Technology: A Systems Approach (MindTap Course List)

6th Edition

ISBN:9781133612315

Author:Jack Erjavec, Rob Thompson

Publisher:Jack Erjavec, Rob Thompson

Chapter3: Basic Theories And Math

Section: Chapter Questions

Problem 2RQ: In what four states does matter exist? Cite examples of each.

See similar textbooks

Similar questions

Air contained within a piston–cylinder assembly undergoes three processes in series: Process 1–2: Compression during which the pressure–volume relationship is pV = constant from p1 = 10 lbf/in.2, V1 = 4 ft3 to p2 = 50 lbf/in.2 Process 2–3: Constant volume from state 2 to state 3 where p = 10 lbf/in.2 Process 3–1: Constant pressure expansion to the initial state. Sketch the processes in series on p–V coordinates. Evaluate (a) the volume at state 2, in ft3, and (b) the work for each process, in Btu.
Some unknown gas undergoes a polytropic process, pV^1.5 = constant, the initial pressure, p1, is 1 bar, and the initialvolume, V1, is 1 m3. We also know the final volume, V2, is 4 m3. Please determine 1) the final pressure of the gas, p2, inbar; and the total work done by the gas, W, in kJ; 2) judge the direction of energy flow for the work: into the system or outof the system.
1. Happens when an interaction of the thermometer and matter causes no further change in the system. a. thermal force b. thermal equilibrium c. thermal power d. thermal exchange 2. The triple point of water is a. 1000 Pa b. 1 atm c. 610 Pa d. 101, 325 Pa 3. This is defined when a system in a given initial stage goes through a number of different changes of a state or processes and finally returns to its initial state. a. adiabatic process b. thermodynamic cycle c. thermodynamic system d. Zeroth law of thermodynamics
Nitrogen (N2) gas within a piston-cylinder assembly undergoes a process from p1 = 25 bar, V1 = 0.8 m3 to a state where V2 = 3.5 m3. The relationship between pressure and volume during the process is pV1.5 = constant. For the N2, determine (a) the pressure at state 2, in bar, and (b) the work, in kJ. Will nitrogen gas be expanded or compressed at the end of the process?
While the temperature remains constant at 38 degrees C, 2.5 kg of a certain ideal gas whose Cp = 1.1724 kJ/kg-K, Cv = 0.8375 kJ/kg-K rejects 300kJ of heat. If the initial pressure 596kPa, find: (a) the final pressure in kPa 1,887 1,792 1,682 (b) the initial volume in cubic meter 0.46 0.48 0.44 (c) the final volume in cubic meter 0.145 0.155 0.138
A closed system consisting of 2 lb of a gas undergoes a process during which the relation between pressure and volume is pVn = constant. The process begins with p1 = 15 lbf/in.2, ν1 = 1.25 ft3/lb and ends with p2 = 60 lbf/in.2, ν2 = 0.5 ft3/lb. Determine (a) the volume, in ft3, occupied by the gas at states 1 and 2 and (b) the value of n.
for steam, the specific ideal gas constant = 461.5 J/kg K A closed system is comprised of pure water substance initially at a temperature of 500 oC and a pressure of 20 MPa (state 1). The system undergoes an isochoric process whereby its pressure drops to 0.1 Mpa (state 2). For state 1 evaluate the specific volume assuming the steam behaves as an ideal gas and comment on your result.
As shown, a piston-cylinder assembly contains 5 g of air holding the piston against the stops. The air, initially at 3 bar, 600 K, is slowly cooled until the piston just begins to move downward in the cylinder. The air behaves as an ideal gas, g = 9.81 m/s2, and friction is negligible. Sketch the process of the air on a p–V diagram labeled with the temperature and pressure at the end states. Also determine the heat transfer, in kJ, between the air and its surroundings.
As shown in the figure below, a gas contained in a vertical piston-cylinder assembly. A vertical shaft whose cross-sectional area is 0.8 cm2 is attached to the top of the piston. Determine the magnitude, F, of the force acting on the shaft, in N, required if the gas pressure is 3 Bar. The masses of the piston and attached shaft are 24.5 kg and 0.5 kg, respectively. The piston diameter is 10 cm. The local atmospheric pressure is 1 bar. The piston moves smoothly in the cylinder and g = 9.81 m/s2.
Consider an air conditioning system which requires periodic air renewal. Therefore, fresh air must be introduced by mixing outside air (state 1) and return air from the conditioned room (state 2). The figure shows the principle of operation and data on the air quantities and the evaporator outlet (state 4). Determine the capacity (Q) of the evaporator coil in kJ/kg of dry air.
Five kilograms of water at 35 degrees Celsius are placed in a piston under 5.335MPa (State 1). Heat is added to the water at constant pressure until the piston reaches a stop at a total volume of 0.035 m3 (State 2). Most heat is added at constant volume until the temperature of water reaches 322 degrees Celsius (State 3). Determine (a) the quality of fluid and the mass of the vapor at State 2, and (b) the pressure of the fluid at State 3.
A closed, rigid, 0.55 m3 tank is filled with 9 kg of water. The initial pressure is p1 = 20 bar. The water is cooled until the pressure is p2 = 4 bar. Determine the initial quality, x1, and the heat transfer, in kJ.