3- An engine working on Otto cycle has cylinder bore of 210 mm and stroke length of 240 mm. The clearance volume is 1550 cc. The pressure and temperature at the beginning of compression are 1bar and 17°C respectively. The maximum pressure of the cycle is 50 bar. Determine the pressure and temperature at the salient points, the air- standard efficiency, the work done, and the mean effective pressure. What will be the ideal power developed by the engine, if the working cycle per minute is 600? [Answer:T=607.82K,P3=13.33bar,T3=2279.92K,P3=50bar,T=1087.77K,P,=3.75bar „n=52.28%,WNET=4.083kj,mep=491.23kpa,power=40.38KW]

3- An engine working on Otto cycle has cylinder bore of 210 mm and stroke length of 240 mm. The clearance volume is 1550 cc. The pressure and temperature at the beginning of compression are 1bar and 17°C respectively. The maximum pressure of the cycle is 50 bar. Determine the pressure and temperature at the salient points, the air- standard efficiency, the work done, and the mean effective pressure. What will be the ideal power developed by the engine, if the working cycle per minute is 600? [Answer:T=607.82K,P3=13.33bar,T3=2279.92K,P3=50bar,T=1087.77K,P,=3.75bar „n=52.28%,WNET=4.083kj,mep=491.23kpa,power=40.38KW]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ammonia refrigerator produces 30 tonnes of ice from ant at 0 °C in 24 hours. The temperature range of the compressor is 25 °C to -15 °C. The vapour is dry saturated at the end of compression. Assume a coefficient of performance to be 60% of the theoretical value. Calculate the power required to drive the compressor. Latent heat of ice = 135 kJ/kg. Properties of ammonia are as follows:Temperat ureEnthalpy (kJ/kg)Specific entropy (kJ/kg-K)(oC) Liquid Vapour (hf) (hg)Vapor (Sf) (Sg)Liquid25 -15298.90 1465.84 112.34 1426.541.1242 0.45725.0391 5.5490
5. A steam engine develops 45 BHP with dry saturated steam at 1.03425 MPa and exhaust at 0.12411 MPa. Steam consumption is 750 kg/hr. Calculate the thermal efficiency of equivalent Rankine Engine, in percent.
The compression ratio in a gasoline engine is 8. The total cylinder volume of the engine (for the bottom dead point) is 600 ml, and air enters the cylinders at a temperature of 20 ° C and a pressure of 100 kPa andThe maximum temperature of the cycle is known as 1500 ° C. a) Calculate the heat input in the cycle in kJ. b) Calculate the thermal efficiency of the cycle c) Calculate the power generated in the cycle.
An automobile have a three-liter SI V6 engine that operates on a four-stroke. The compression ratio is 10.5, the length of connecting rod is 16cm, and the engine is square. At this speed, combustion ends at 20° a TDC. The connected to a dynamometer which gives a brake output torque reading of 200 N.m at 3600 r.p.m. at this speed air enters the cylinder at 85 kpa and 60℃ and the mechanical efficiency of the engine is 85%. Calculate: 1- Clearance volume of one cylinder. 2- Piston speed at the end of combustion. 3- Volume in the combustion chamber at the end of combustion. 4- Friction mean effective pressure. 5- Brake output per displacement.
Air with a pressure of 0.1 MPa and a temperature of 25oC with a flow rate of 5.29 kg/minute enters a three-stage reciprocating piston compressor with intercooler. The air is compressed polytropically (n = 1.3) to reach the pressure of 4 MPa. Calculate: a) The pressure at stage-2 and stage-3 so that the compression work is minimum? b) The compression work in each stage and the total compression work? c) The outlet air temperature from each stage's cylinder? d) The amount of heat transferred to each intercooler? e) How much air is needed for cooling in the intercooler if the allowable maximum temperature changes between the inlet and outlet of the intercooler is 8oC?
1.One kilogram of air was used as prime mover in a standard Otto cycle. The temperatures during the start and end of the compression stroke are 400K and 600K, respectively. Given that the displaced volume is 2m3 while the mean effective pressure is 40kPa. Determine the following. d. Compression Ratio
A single reciprocation compressor takes 1m³ of air per minute and 1.013 bar and 15 degree Celsius and delivers at 7 bar. Assuming Adiabatic law(n=1.35) and no clearance. This same compressor is now driven at 300 rpm, has a stroke bore ration of (1.5:1), it has a mechanical efficiency for the compressor of 85% and motor transmission efficiency of 90%. Calculate: Volume per cycle Cylinder bore diameter Power to the compressor Motor power needed The isothermal power The isothermal efficiency
A CI engine with a compression ratio of 18:1 operates on an air-standard diesel cycle at3200 RPM. Maximum temperature and pressure in the cycle are 2527°C and 6500 kPa, andexhaust pressure is 100 kPa. Cylinder pressure is 530 kPa when the exhaust valve opens at48° bBDC.Calculate:(a) Time of one blowdown process. [sec](b) Average temperature of exhaust during exhaust stroke. [°C](c) Velocity of exhaust gas through the exhaust valve at start of blowdown. [m/sec
An air standard gas turbine engine operates on an overall pressure ratio of 4 and between the temperature limits of 70 F and 1600 F. The efficiencies of compressor and turbine are 0.82 and 0.92, respectively. To modify, a regenerator of effectiveness 0.65 is added and two stage of compressor with intercooler is inserted and two-stage turbine with reheater is inserted. (a) Assuming constant specific heats, evaluate the compressor work (b) calculate the turbine work (c) calculate the thermal efficiencies Show complete solution on a paper.
The piston diameter of a 4-cylinder Otto engine is 100 mm and the piston stroke is 90 mm. The compression ratio of this Otto engine, which has a compression ratio of 8 and operates according to the standard air acceptance, is 300K and its pressure is 1 bar. A)Find the thermal efficiency and the average effective pressure of the cycle.
Consider a cylinder of a gasoline engine at the beginning of the compression cycle, duringwhich a fuel/air mixture (for our purposes mostly composed of nitrogen and oxygen, i.e.an ideal gas of diatomic molecules) at 300 K and 1 bar is compressed down to one-tenthvolume (compression ratio of 10:1). Assume that the compression is rapid so no heatexchange occurs with the environment. Calculate the pressure and the temperature ofthe compressed gas. In a diesel engine, the compression ratios are typically much higher;redo the same calculation with a compression ratio of 20:1.
A single-acting, single-cylinder air compressor is rated at 4.25 m3/min of air. The suction conditions are 1 atm and 27 C and discharge pressure is 1034 kPa. The compression process follows the equation PV1.35 = A. Determine the power, in kW, required to compress the air. B.)what is the engine kW power needed to drive the unit if the combined engine-compressor efficiency is 84%? C.)if the compressor is to run two-stage at optimum intercooler pressure with perfect intercooling, what will be percentage of power saved?