3-phase 3730W, 220V, 6 pole and 50 Hz induction motor operates at full load with a slip of 0.025.The sum of the rotational losses including friction + windage losses and other (stray load) losses is5% of the output power. Find the induced (electromagnetic) moment at full load.O 25.5725 N.mO 40.2582 N.mO 84.6395 N.mO 12.7863 N.mO 70.7351 N.mO 38.3588 N.mO 51.1451 N.mO 63.3692 N.m

Answered: Image /qna-images/answer/8be8133b-38dc-4c0c-94ec-c992e2e6246a.jpg

Answered: 3-phase 3730W, 220V, 6 pole and 50 Hz…

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A three-phase 60 Hz induction motor connected to a three-phase bus at rated voltage isoperating at a low slip condition (i.e s < 20%) resulting in a steady state speed of 1090 rpm.(a) How many poles does the motor have?(b) What is the percentage slip at the operating speed?(c) What is the corresponding frequency, (fr) of the currents and voltages induced in therotor winding?
A three-phase induction motor, operating at rated voltage and frequency, has a startingtorque of 1.35 times and a maximum torque of 2.2 times, both with respect to its rated-loadtorque. Ignoring the effects of the stator resistance and rotational losses and assumingconstant rotor resistance, determine the slip at the maximum torque;
A 25 HP, 6 pole, 50 Hz, 3-phase slip ring induction motor runs at 960revolutions per minute on full load with a rotor current per phase of 35 A.Allowing 250 W for the copper loss in the short-circuiting gear, and 1000Wfor mechanical losses, find the resistance per phase of the three-phaserotor winding.
A three-phase, Y-connected, 220 V, 5 kVA, salient-pole synchronous generator is employed to supply power to a load with unitary fp. By means of a slip test, the direct-axis synchronous reactance is determined to be 12 Ω and the quadrature-axis synchronous reactance, 7 Ω. Consider that the rated current is delivered to the load at the rated voltage and that the armature resistance is negligible. (a) Calculate the corresponding value of the excitation voltage. (b) What is the value of the internal phase shift angle? (c) What is the value of the power angle?
A three-phase induction motor, operating at rated voltage and frequency, has a startingtorque of 1.35 times and a maximum torque of 2.2 times, both with respect to its rated-loadtorque. Ignoring the effects of the stator resistance and rotational losses and assumingconstant rotor resistance, determine the slip rated load, and the rotor current at starting (as a percentage of the rotor current at rated load). The slip at maximum torque is 0.343 if that helps.
3-phase 3730W, 220V, 6-pole and 50 Hz induction motor operates at full load with a slip of 0.025. The sum of the rotational losses including friction + windage losses and other (stray load) losses is 5% of the output power. Find the induced (electromagnetic) moment at full load
The 3-phase 3730W, 220V, 2-pole and 50 Hz induction motor has a slip of 0.025 at full load. The future of friction (friction)+reducing losses and other (stray load) losses is 5%. Find the induced (electromagnetic) moment at full load. Answer guide group 12.7863 Nm 84.6395 Nm 70.7351 Nm 25.5725 Nm 40.2582 Nm 38.3588Nm 51,1451 Nm 63.3692Nm
EMachines A 100 MVA, 11.5 kV 0.8 pf lagging 50-Hz two pole Y-connected synchronous generator has a per-unitsynchronous reactance of 0.8 and per-unit armature resistance of 0.012. A. What is its synchronous reactance and armature resistance in ohms?B. What is the magnitude of the internal generated voltage at the rated conditions? What is its torque angleat these conditions?C. Ignoring losses in this generator, what torque must be applied to its shaft by the prime mover at fullload?
Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and 1800 rpm. Each winding has an armature resistance of 0.05Q and a synchronous reactance of 0.6Q. Draw the phasor diagram with values, show torque angle and determine the induced voltage for the condition of rated load.
Three-phase induction motor, 460 V 50 Hz, 4 poles, 50 hp with Delta, operating at 3.8% slip rated torque when receives Line Voltage 460 V, 50 Hz The parameters of the equivalent circuit per phase are as follows.R1 = 0.33, X1 = X2 = 0.42 and Xm = 30 Ohm / phase.Answer the following questions by neglecting the mechanical losses, Core losses and Stray load losses.A) Value of the rotor resistance R2 B) Maximum torque and rated speed C) line current and starting torque of motor
A gas turbine, 2-pole, 3? synchronous generator rated at 200 MW is connected to the grid (presumed to be an infinite bus). The electrical operating frequency of the grid is 60 Hz, and the slope of the frequency-power curve for the generator is 15 MW/Hz. a. If the no-load setpoint for the generator is set to 63.5 Hz, how much active power will the generator provide to the grid? b. Neglecting system losses, what is the torque provided by the gas turbine? c. What would happen if the no-load setpoint for the generator is set to 59 Hz?
A DC shunt generator has a full load output of 10kW at a terminal voltage of 240V. The armature and the shunt field winding resistances are 0.6 and 160 ohms respectively. The sum of the mechanical and core-losses is 500W. calculate the power required in kW at the driving shaft at full-load, and the corresponding efficiency and voltage regulation

SEE MORE QUESTIONS

Recommended textbooks for you

Power System Analysis and Design (MindTap Course …

Electrical Engineering

ISBN:

9781305632134

Author:

J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:

Cengage Learning