A three-phase, Y-connected, 220 V, 5 kVA, salient-pole synchronous generator is employed to supply power to a load with unitary fp. By means of a slip test, the direct-axis synchronous reactance is determined to be 12 Ω and the quadrature-axis synchronous reactance, 7 Ω. Consider that the rated current is delivered to the load at the rated voltage and that the armature resistance is negligible. (a) Calculate the corresponding value of the excitation voltage. (b) What is the value of the internal phase shift angle? (c) What is the value of the power angle?

A three-phase, Y-connected, 220 V, 5 kVA, salient-pole synchronous generator is employed to supply power to a load with unitary fp. By means of a slip test, the direct-axis synchronous reactance is determined to be 12 Ω and the quadrature-axis synchronous reactance, 7 Ω. Consider that the rated current is delivered to the load at the rated voltage and that the armature resistance is negligible. (a) Calculate the corresponding value of the excitation voltage. (b) What is the value of the internal phase shift angle? (c) What is the value of the power angle?

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.1P

See similar textbooks

Similar questions

For Problem 3.18, the motor operates at full load, at 0.8 power factor leading, and at a terminal voltage of 10.45 kV. Determine (a) the voltage at bus 1, which is the generator bus, and (b) the generator and motor internal EMFs.
A three-phase Y-connected synchronous generator has rated values of 90 MVA, 15 kV, 0.6 reverse power factor, 50-Hz. Synchronous reactance 1.6 ohmsand armature resistance is neglected. According to thisa) Find the induced voltage (EA) and armature current (LA). b) Find the voltage regulation.c) If this generator was operated at 60 Hz with the same armature and field losses as at 50 Hz; What would be the voltage, apparent power and reactance of the generator
In a three-phase, Y-connected, 750-kVA, 1732-V, synchronous generator afield current of 20 A at the rated speed produces a current of 300 A onshort circuit and a voltage of 1732 V on open circuit. The resistance betweenany two terminals of the generator is 0.8 R. Determine the synchronousreactance of the generator. The rotational loss is 20 kW. Using the per-unitsystem, determine the voltage regulation and the efficiency of the generatorwhen it delivers the rated load at its rated voltage and unity power factor.
A 3 phase, star connected synchronous generator supplies current of 10A having phase angle of 20º lagging at 400V. Find the load angle and the components of armature current Id and Iq if Xd = 10 ohm and Xq = 6.5 ohm Assume armature resistances to be negligible
a) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulation
EMachines A 100 MVA, 11.5 kV 0.8 pf lagging 50-Hz two pole Y-connected synchronous generator has a per-unitsynchronous reactance of 0.8 and per-unit armature resistance of 0.012. A. What is its synchronous reactance and armature resistance in ohms?B. What is the magnitude of the internal generated voltage at the rated conditions? What is its torque angleat these conditions?C. Ignoring losses in this generator, what torque must be applied to its shaft by the prime mover at fullload?
A 60 MVA, 69.3kV, three-phase synchronous generator has a synchronous reactance of 15 ohms/phase and negligible armature resistance. The generator is delivering rated power at 0.8 power factor lagging at the rated terminal voltage to an infinite bus bar. What is the maximum three-phase power that can be generator can deliver before losing its synchronism?
The magnitude of the no-load, line-neutral voltage induced on the ‘a’-phase stator windings of a synchronous 3? generator is |?a | = 480 V. Presume the stator winding resistance is negligible, and that the synchronous reactance is ?௦ = 1.1 Ω. The full-load, per-phase current magnitude for the generator is 30 A at a power factor of 0.8 leading . For these conditions: a. What is the line-neutral ‘a’-phase terminal voltage, ?థ? b. What is the power angle (?)? c. What is the percent voltage regulation? d. What is the total 3? complex, real, and reactive power delivered to the load?
a) With the aid of a diagram and phasor diagram, explain the double-reactance concept for salient-pole alternators. b) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulation
In a long-shunt compound generator, the terminal voltage is 220 Vwhen generator delivers 110 A. Determine (a) induced emf and (b)total power generated. Given that shunt field, series field,diverter and armature resistances are 90 Ω, 0.025 Ω, 0.04 Ω and0.03 Ω respectively.
A 70-MVA, 69.3-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 14 ohm per phase and negligible armature resistance. 1) The generator is delivering rated power at 0.87 power factor lagging at the rated terminal voltage to an infinite bus bar (Fig. 1). Determine the magnitude of the generated emf per phase and the power angle δ. 2) The generator is delivering 53.5 MW to the bus bar at the rated voltage with its field current adjusted for a generated emf of 46 kV per phase. Determine the armature current and the power factor. Is the power factor is lagging or leading? 3) Given that the generator is operating at the excitation voltage of Part (1), determine the maximum steady-state power which the machine can deliver without losing synchronism. Find the armature current corresponding to this maximum power.
A 3-phase, Y connected, round rotor synchronous generator rated at 12kVA, 240V has a Synchronous reactance of 1.2Ω per phase and an armature resistance of 0.6Ω per phase. Calculate: i) The generated phase voltage at full load and 0.8 lagging power factor. ii) The percentage voltage regulation at full-load with 0.8 lagging power factor. iii) The generated phase voltage at full load and 0.8 leading power factor. iv) The percentage voltage regulation at full-load with 0.8 leading power factor.