3. As shown, a round viewing window of diameter D=0.8m is situated in a large tank of seawater (S=1.03) The top of the window is 1.2m below the water surface, and the window is angled at 60° with respect to the horizontal. Find the hydrostatic force acting on the window and locate the corresponding CP. Window Sea water 60

3. As shown, a round viewing window of diameter D=0.8m is situated in a large tank of seawater (S=1.03) The top of the window is 1.2m below the water surface, and the window is angled at 60° with respect to the horizontal. Find the hydrostatic force acting on the window and locate the corresponding CP. Window Sea water 60

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
Compute the surface area of the axi-symmetric domed structure.
A semicircular gate with a diameter of 6 ft is installed at 50º as shown below. The top of the gate is 5 ft below the water surface. Determine the resulting hydrostatic force and the location of the center of pressure on the gate.
Calculate the depth of the center of pressure for vertical rectangular plate having a height h = 10ft and base b = 5ft, and submerged in a liquid with its base at the liquid surface. If the upper base of the vertical rectangular plate given in the example problem is submerged by 12ft below the water surface, determine the location of the hydrostatic force and center of pressure. Answer should be (53,040 lbf and 17.4902ft)
Find the position of centre of buoyancy for a wooden block of width 5 m and depth 1 m, when it floats horizontally in water. The density of wooden block id 850 kg/m3 and its length 4.0 m.
Consider the slanted plate AB of length L in Fig. .( a ) Is the hydrostatic force F on the plate equal to theweight of the missing water above the plate? If not, correctthis hypothesis. Neglect the atmosphere. ( b ) Can a “missingwater” theory be generalized to curved surfaces of this type?
The dam in Fig. P is a quarter circle 50 m wide into thepaper. Determine the horizontal and vertical componentsof the hydrostatic force against the dam and the point CPwhere the resultant strikes the dam.
A plate has the shape of a circle with radius 5 m. The plate is submerged vertically in water so that thebottom of the plate is 15 m below the surface of the water. Find the hydrostatic force exerted on the platedue to the hydrostatic pressure of the water.
Calculate the fluid force on one side of a 5 ft by 5 ftsquare plate if the plate is at the bottom of a pool filled with waterto a depth of 8 ft anda. lying flat on its 5 ft by 5 ft face.b. resting vertically on a 5-ft edge.c. resting on a 5-ft edge and tilted at 45° to the bottom of the pool
Find the position of the center of pressure of a circular plate of diameter 1.5m placed vertically in water in such a way that center of plate is 2m below the free surface of water.
How can you calculate the hydrostatic force FR (magnitude) and its point of application (center of pressure) acting on the top surface of a submerged rectangular plate for vertical, and horizontal case.Explain