Example: A hemisphere projection of diameter 0.6 m exists on one of the vertical sides of a tank. If the tank contains water to an elevation of 1.5 m above the center of the hemisphere, calculate the vertical and horizontal forces.

Example: A hemisphere projection of diameter 0.6 m exists on one of the vertical sides of a tank. If the tank contains water to an elevation of 1.5 m above the center of the hemisphere, calculate the vertical and horizontal forces.

Name: Example: A hemisphere projection of diameter 0.6 m exists on one of t
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Example: A hemisphere projection of diameter 0.6 m exists on one of the vertical sides of atank. If the tank contains water to an elevation of 1.5 m above the center of the hemisphere,calculate the vertical and horizontal forces.Water1.5 mo|0.6 mN立M

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

A triangular trough whose the edges are 5, 5, and 8 m long is place vertically in water with its longest edge uppermost, horizontal, and 3 m below the water level. Calculate the force on a side of the plate. A.235.2 kN B. 470.4 kN C. 940.8 kN D. 1,881.6 Kn The answer here is B but I dont know the solution.
A closed tank whose bottom is 18 inches in diameter is filled with three liquids: 4 inches of carbon tetrachloride (SG=1.59), 2 inches of water and 12 inches of syrup (SG=1.31). The air chamber in the tank is pressurized at 1296 psf. d. Apply the PANEL EQUATIONS to determine the magnitude, direction and location of the total hydrostatic force acting at the bottom of the tank.
at height of 10 km (33000 ft) above sea level atmospheric pressure is about 210 mm of mercury. what is the resultant normal force on 600 cm^2 window of an airplane flying at this height? assume the pressure inside the plane is 760 mm of mercury. the density of mercury is 13600 kg/m^3
An open cubic tank of side length 2 m is completely filled with water. If the surface of the water and the outside of the tank are subject to atmospheric pressure, what are the hydrostatic forces acting on: Each side of the tank? The base of the tank?
Derive the expression for the hydrostatic force on a vertical plane surface?
Calculate the depth of the center of pressure for vertical rectangular plate having a height h = 10ft and base b = 5ft, and submerged in a liquid with its base at the liquid surface. If the upper base of the vertical rectangular plate given in the example problem is submerged by 12ft below the water surface, determine the location of the hydrostatic force and center of pressure. Answer should be (53,040 lbf and 17.4902ft)
For the tank of water shown below, the radius of the circular surface is R=1.0 m, h=1.0m, and the length of the tank is w=2.0 m. Determine (1) the correct expression of the area magnitude whose volume weight is equivalent to the vertical force exerted on the whole curved surfaces_________
1. A quarter of a circular gate 3 meters in diameter is inclined at an angle of 45 degrees. Sea water stands on one side of the gate to a height of 10 m above the center of the gate. Determine the total force on the gate and the location of the center of pressure.
A cubical tank is 3 m x 3 m x 3 m and is layered with1 meter of fl uid of specifi c gravity 1.0, 1 meter of fl uid withSG = 0.9, and 1 meter of fl uid with SG= 0.8. Neglectatmospheric pressure. Find ( a ) the hydrostatic force on thebottom and ( b ) the force on a side panel.
Calculate the fluid force on one side of a 5 ft by 5 ftsquare plate if the plate is at the bottom of a pool filled with waterto a depth of 8 ft anda. lying flat on its 5 ft by 5 ft face.b. resting vertically on a 5-ft edge.c. resting on a 5-ft edge and tilted at 45° to the bottom of the pool
The round holes drilled in the sides and decks to illuminate the interior of the ships are called "portholes". If the center of a 30 cm diameter porthole of a ship is 10 m below the water level, how many N is the hydrostatic force acting on this porthole? Take the density of the water as 1000 kg / m3, the gravitational acceleration as 10 m / s2 and the value as 3.
1. A vertical semi-circular area of radius r is submerged in a liquid with its diameter in the liquid surface. How far is the center of pressure from the liquid surface? 2. An open vat holding oil (s=0.80) is 8 m long and 4 m deep and has a trapezoidal cross-section 3 m wide at the bottom and 5 m wide at the top. Determine the following: (a) the weight of oil, (b) the force on the bottom of the vat, and (c) the force on the trapezoidal end panel.