3. Two 6600/440 Volts transformers, A is 250 KVA and B is 500 KVA, have the following impedance/phase: Ra = 0.008 ohms, Xa = 0.035 ohms, Rb = 0.003 ohms, Xb= 0.019 ohms How will they share a load of 600 kVA at a power factor of 08 lagging if the load voltage is 440 V? The kVA and p.f. of each transformer are required.

3. Two 6600/440 Volts transformers, A is 250 KVA and B is 500 KVA, have the following impedance/phase: Ra = 0.008 ohms, Xa = 0.035 ohms, Rb = 0.003 ohms, Xb= 0.019 ohms How will they share a load of 600 kVA at a power factor of 08 lagging if the load voltage is 440 V? The kVA and p.f. of each transformer are required.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Similar questions

Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at 0.9 power factor leading, are connected in parallel and supplied by a balanced three-phase Y-connected, 480-V source. (a) Determine the source current. (b) If the load neutrals are connected to the source neutral by a zero-ohm neutral wire through an ammeter, what will the ammeter read?
Does an open- operation, the kVA rating compared to that of the original thr-phase bank is (a) 2/3 (b) 58 (c) 1
Two 6600/440 Volts transformers, A is 250 kVA and B is 500 kVA, have the following impedance/phase: Ra = 0.008 ohms, Xa = 0.035 ohms, Rb = 0.003 ohms, Xb = 0.019 ohms How will they share a load of 600 kVA at a power factor of 0.8 lagging if the load voltage is 440 V? The kVA and p.f. of each transformer are required.
Two 7970-V:230-V single-phase transformers with impedance with respect to their secondaries of 1.5 + j3 and 2 + j4.5 ohms are connected in parallel to a 7900-V source. Their secondaries are supplying a common load of 30 + j40 ohms. What is the magnitude of the voltage across the load in volts? (2 decimal places)
Two single phase transformers with equal turns have impedance of (0.5+j0.3) ohms and (0.6+j10) ohms with respect to the secondary. If they operate in parallel, how will they share a load of 100 kW at 0.8 p.f. lagging?
Three with 1200/120 V, 7.2 kVA single-phase transformers with a leakage reactance of 10 ohms each referred to the HV side. The three transformers are connected Y in the HV side and Δ in the LV side. If 1039 V is applied to the HV side while the LV side is open, the resulting voltage in the LV side is what?
For the same alternator, the ratio of rated KVA, when connected as 3-phase winding to when connected as single phase alternator (by utilizing the coils) is, a.1.33 b.0.50 c.0.67 d.1.50
b. A single-phase power system is shown below. The power source feeds a l00-kVA, 14/2.4 - kV transformer through a feeder impedance of 40.0 + j150 Ω. The transformer's equivalent series impedance referred to its low-voltage side is 0.12 + j0.5 Ω. The load on the transformer is 90 kW at 0.80 pf lagging and 2300 V. i. What is the voltage at the power source of the system? ii. What is the voltage regulation of the transformer?
Two identical 460/230-V transformers are connected in parallel to a common load with impedance 10 + j6 ohms. The series impedance of the transformers referred to the secondary is 1.5 +j3 ohms. What is the current drawn by the load from the transformers if the voltage across it is 230 V?
The primary windings of three single phase transformers are wye connected and the secondary windings are delta connected. The voltage applied to each primary winding is 2300V and the secondary line voltage is 230V find the secondary line current when the primary line current is 30A Show calculations
73. Two single-single phase transformers are to be connected open-delta. What is the minimum kVA rating of each transformer if the load to be supplied is 200 kW at 0.85 pf lagging? A. 125 C. 136 B. 158 D. 115
Two three-phase transformers of equal voltage ratios are operating in parallel.The load draws a current of 200 A at a power factor of 0.9 lagging. Thesecondary impedances of each of the transformers are given below:Z1 = 0.1 + j0.3 ohm Z2 = 0.2 + j0.5 ohm,Calculate the current delivered by each transformer.