300 mm150 mmø425 mmHg C13-6)A 150mm diameter venturi meter is installed in a 300mm diameter horizontal main pipe as shown. Determine a) Dischargeneglecting head loss, b) Discharge if head loss from point 1 to point2 is 500mm and c) The coefficient of discharge. (This is a multipleanswer question. You must have 3 selected choices since there are 3 required answers in the problem)A) C = 0.952B) No answer among the choices in question CC) Q = 196 L/sD) Q = 169 L/sE) Qt = 169 L/sF) No answer among the choices in question BG) C = 0.904H) Qt = 187 L/s1) Qt = 178 L/sJ) No answer among the choices in question AK) Q = 187 L/sL) Qt = 196 L/sM) Q = 178 L/sN) C = 0.862o) c = 0.908O e ® O © O O O O

given diameter of venturimeter at point 1=D1=300mm=.3m diameter of venturimeter…

300 mm 150 mm 2. 下 425 mm -Hg C13-6) heter venturi meter is installed in a 300mm diameter horizontal main pipe as shown. Determine a) Discharge d loss, b) Discharge if head loss from point 1 to point2 is 500mm and c) The coefficient of discharge. (This is a multip on. You must have 3 selected choices since there are 3 required answers in the problem) 介

300 mm 150 mm 2. 下 425 mm -Hg C13-6) heter venturi meter is installed in a 300mm diameter horizontal main pipe as shown. Determine a) Discharge d loss, b) Discharge if head loss from point 1 to point2 is 500mm and c) The coefficient of discharge. (This is a multip on. You must have 3 selected choices since there are 3 required answers in the problem) 介

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The static head at a certain station on a 101.6 mm schedule 40, clean iron cold pipe is 70.69 m The static head is to be determined for a station 162.4 m farther along the pipe in the direction of flow,and where the pipe is 10.14 m higher than station 1. Between the stations are two elbows. Flow rateis 1452 l/min.
What is the Reynold’s number for a flow of oil (SG = 0.80, ? = 0.00200 lb-s/ft2) in a 6-in diameter pipe at a flow rate of 10ft3/s. Is the flow laminar or turbulent? thank you!
Discussion 1- Indicate the factors affecting the Reynotes number (Re). 2. The limits are gaved to the Reynolds number (Re) that if they less than 2000 it is the laminar flow and if they more than 4000 The flow is turbubent but there is a possibility to change those limits. 3-Discuss the importance of the infinite medium. Worksheet No. Risc of W.L. in Time for Risc in Collecting Tank (cm) W.L. (sec.) 1 s 45 2 s 26.5 3 s 21.5 4 % 12.75 s s 7 6 s s Diameter of pipe = 1.8 cm Length of pipe = 87 cm Area of Collecting Tank = 13 x 8.5 cm® @ Temperature of water = 30
What is the entrance length in a 4-cm-diameter pipe if 0.5*10^ -4 m^ 3 / s water is flowing
A 0.5-inch diameter water pipe is 18 m long and delivers 19 L/min. What fraction of this pipe is taken by the entrance region?[Ans. LE /L=1.7%]
Q1/ Neglecting losses, determine the discharge in Fig. below Oil sp gr 0.75 3 ft 4 ft 4 in, diam Water
The flow rate of a hydraulic fluid with a Sg of 1.08 through a 2-in. I.D. orifice is 50 gal/min. If the pressure drop across the orifice is 5 lbf/in.", what is the discharge coefficient?
A 152.4 mm, Schedule 40 pipe line 91.4 m long conveys 3028 l/min of cold water from a pump to a point of discharge 24.4 m higher than the pump. There are four 90° elbow in the line. Find the pumps dynamic discharge head. Use Table of Equivalent Length of Straight Pipe (see image). Please help. Thank you :)
Hydraulics Differentiate the relationship of discharge and head loss between series and parallel piping network. Provide necessary equations.
A pipe experienced a total head loss of 15 m, determine thepressure difference from its starting point to discharge point inkPa.
Q1/ Neglecting losses, determine the discharge in Fig. below Oil sp gr 0.75 3 ft 4 in, diam Water
Submit your question to our 24/7 subject matter experts with Masters and PhDs and get a solution in as fast as 30 minutes* Provide a complete and clear solution Considering the figure, what is the discharge in each pipe if the expected head loss is 5.5 meters?