37°10 mA uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam isfree to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam isattached to the wall.48N40N 10 mA uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam isfree to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam isattached to the wall.48N40N30NO36NO60N

Answered: Image /qna-images/answer/2f65f333-f1af-42fa-a732-3289f36ed239.jpg

37° 10 m A uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam is free to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam is attached to the wall.

37° 10 m A uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam is free to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam is attached to the wall.

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 38P: A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the...

See similar textbooks

Related questions

Q: Two electrolytic capacitors are connected in parallel across a 12-volt supply. After 5 seconds, how…

A: Given, Voltage=12volt Time=5sec

Q: Q2. A green toy car with 0.025-kg mass moves to the right at 0.30 m/s and has a head-on, elastic…

Q: An electron travels with speed 1.3×107 m/s between the two parallel charged plates shown in the…

A: Given that:- Speed of electron=v=1.3×10^7m/s

Q: am is propagating within a piece of glass with refraction index n1 %3D (1.9600x10^0). What is the…

Q: Eight resistances [identical] are connected in series across a 220-V line a. Identify the voltage…

Q: | of the following are properties of fluid pressure except The forces exerted by a fluid on the…

A: Pressure is the force per unit area P = F/A

Q: Q1 . A bar 1m in length has a negligible mass and it is placed on a pivot point at the 0.55 m mark.…

A: Given A bar 1m in length has a negligible mass and it is placed on a pivot point at the 0.55 m mark.…

Q: A green toy car with 0.025-kg mass moves to the right at 0.30 m/s and has a head-on, elastic…

Q: A uniformly charged ring of radius 10.0 cm has a total charge of 85.0 µC. Find the electric field on…

Q: A 25.0 kg box of textbooks rests on a ramp that makes an angle with the horizontal. The coefficient…

A: Given : mass, m = 25 kg Coefficient of kinetic friction = 0.25 =uk Coefficient of static friction =…

Q: Mike is cutting the grass using a human-powered lawn mower. He pushes the mower with a force of 45 N…

Q: 85 ст 40 ст

A: We need to find the velocity of water on the surface of water and also the velocity of water at the…

Q: How far is the second dark fringe to the right of the central bright fringe in the double-slit…

Q: Young's modulus of iron rod is 21 x 1010 N/m². A force of 7.0 × 105 N is applied to a 1.5-m length…

Q: An electron moves with a speed of 5.0×107 m/s in the directions shown in Figure 2 below. A 0.50 T…

Q: A 2 kg object moving at 3 m/s collides with a 4 kg object that is stationary. If the collision is…

A: Given Information:- Mass of the first object is m1=2kg Mass of the second object is m2=4 kg Initial…

Q: A car travles 10 km north and another 5 km towards the direction of 30 degress west of north?…

Q: What is the amplitude of the wave in the diagram below? 0.00m 0.060 m A) 0.06 m. B) No answer © 0.03…

A: Amplitude of the sinusoidal wave is 0.06m

Q: Which of the following statements is true? Work is a Scalar Quantity Work is positive when the…

A: 1) solution - Yes work is scalar quantity We know that, Work (W)= F.s Where F and s are the vector…

Q: When will the particle reach constant velocity given the position versus time curve equation of x =…

A: Given that:- Position V/s time curve equation is given in the question.

Q: A wooden block floats in fresh water with two thirds of its volume submerged. In alcohol, the wooden…

Q: A 65-kg woman runs up a flight of stairs in 10.0 s. Her net upward displacement is 3.0 m.…

Q: Which of the following statement is False? An object is said to be in equilibrium if and only if…

A: Introduction :- Here we need to check which case does not hold true. So we will check all the given…

Q: Two point charges q1 = (-1.0000x10^0) µC and q2 (1.000x10^0) µC. q1 is located at (x, y)-(…

Q: When an inelastic material is in a collision, A) the work done to deform the material is equal to…

A: Here option (e) is correct. i.e some of the work done to deform the material is converted to other…

Q: A charge Q1=9 uC is place on the y axis at -3 m, and charge Q2=-16uC is place at the x axis at 4m.…

Q: Which of the following is done on the experiment about 1st condition of equilibrium? balance the…

A: The condition of equilibrium is the main concept in the field in of physics. under the…

Q: What speed in m/s would correspond to this energy?

A: 1 PeV = 1015 eV = 1015 × 1.602 × 10-19 J = 1.602 × 10-4 J Now, Glashow resonance kinetic energy…

Q: Question 8 A machine does 2500 J of work in 1 min. What is the power developed by the machine? A 42…

A: Given Work done by Machine = 2500 J Time taken by Machine = 1 min = 60 sec We have to calculate the…

Q: A 402 resistor and a 50mH inductor are connected in series across a Vrms f = 60HZ. Recall 120V AC…

Q: Find the binding energy and the binding energy per nucleon of the 126(C) nucleus. binding energy…

A: Mass of 6 C12 = 12.0000 amu Mass of proton mp = 1.007825 amu Mass of neutron mn = 1.008665 amu

Q: q28 Young's modulus of iron rod is 21 × 1010 N/m2. A force of 7.0 × 105 N is applied to a 1.5-m…

A: Given Young's modulus of iron rod = 21 × 1010 N/m2. Applied force on rod = 7.0 × 105 N length of…

Q: Find the binding energy and the binding energy per nucleon of the (12/6)C nucleus. binding…

Q: 1 ven that k = solve for the value of €,. 4T EO 8.85 x10-12 c* N m 2 9.0 x10-12 C² N m2 3.14 x10-12…

Q: A large tub contains water and there is a faucet as shown in the picture below. the water velocity…

Q: a.) What minimum force must you exert to lift a car of mass 1500 kg. If rout = 0.71 m and Ain = 0.2…

A: Mass of car, m = 1500 kg Inner area, Ain = 0.2 m2 Outer radius, rout = 0.71 m Distance, d2 = 25 cm =…

Q: 4. Two resistors of 4 and 12 0 are connected in parallel across a 22 V battery having internal…

Q: A woman stands on the edge of a cliff and throws a stone vertically downward with an initial speed…

Q: What is the equivalent capacitance of 6 4.7 μF connected in parallel? a. -28.2 μF b. 28.2 μF c.…

A: Given data: The capacitors are connected in parallel combination The number of capacitors (n) = 6…

Q: What is the tension in the rope that lifts a box with a mass of 5 kg (90 degrees)?

Q: Consider the following. (a) Find the angle ? locating the first minimum in the Fraunhofer…

A: Given: In Fraunhofer diffraction pattern of a single slit width of slit, d= 0.218 mm, wavelength of…

Q: Find the binding energy and the binding energy per nucleon of the 126(C) nucleus. binding energy…

Q: The father and son is seated on a 5-meter long seesaw. If the 30-kg son is seated at one end, the…

Q: How many lines per centimeter does a grating have if the third-order bright fringe occurs at a…

Q: a.) What minimum force must you exert to lift a car of mass 1500 kg. If rout = 0.71 m and Ain = 0.2…

Q: Problem 2: A refrigerator has a coefficient of performance equal to 5. The refrigerator discards 150…

A: Given , Coefficient of performance, COP = 5 Amount of heat rejected into high temp reservoir ,…

Q: An investigator places a sample 1.0 cm from a wire carrying a large current; the strength of the…

Q: True or False: The mass flow rate in a tube with one inlet and one outlet varies if the flow is…

A: mass flow =ρAv

Q: Part A Spheres A (mass 0.020 kg). B (mass 0.030 kg). and C (mass 0.050 kg), are each approaching the…

A: In this question, you've to use the simple concept of inelastic collisions as they said that the…

Q: Suppose that you start procedure step 6 with an initial string-length, Li = 30 cm, and finish with a…

A: Given Li = 30 cm ( Initial string length ( fi - ff ) fi x 100 = 34 fi is the frequency of pendulum…

Concept explainers

Torque

Torque is the rotational equivalent of linear force in physics and mechanics. Based on the course of study, it is also known as the moment of force, rotational force, or turning effect.

Question

37°
10 m
A uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam is
free to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam is
attached to the wall.
48N
40N

10 m
A uniform beam of length 10 m and weight 60 N is attached to a wall by a cable as shown in the figure. The beam is
free to pivot at the point where it attaches to the wall. Find the horizontal reaction force at the hinge where beam is
attached to the wall.
48N
40N
30N
O36N
O60N

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the wall and the other end of the strut is attached to a sign that weighs 200.0 N The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the s find the tension in the cable and the force at the hinge of the strut.
The uniform seesaw shown below is balanced on a fulcrum located 3.0 m from the left end. The smaller boy on the right has a mass of mass of 40 kg and the bigger boy on the left has a mass 80 kg. What is the mass of the board?
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A 15.0-in uniform ladder weighing 500 N rests against frictionless wall. The ladder makes a 60.0 angle ESI with the horizontal, (a) Find the horizontal and vertical forces the ground exerts on the base of the ladder when an 800-N firelighter has climbed 4.00 m along the ladder from the bottom, (b) If the ladder is just on the verge of slipping when the firefighter is 9.00 m from the bottom, what is the coefficient of static friction between ladder and ground?
Check Your Understanding A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by a cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.
In Figure 9.21, the cg of the pole held by the pole vaulter is 2.00 m from the left hand, and the hands are 0.700 m apart. Calculate the force exerted by (a) his right hand and (b) his left hand. (c) If each hand supports half the weight of the pole in Figure 9.19, show that the second condition for equilibrium (net =0 ) is satisfied for a pivot other than the one located at the center of gravity of the pole. Explicitly show how you follow the steps in the Problem-Solving Strategy for static equilibrium described above. Figure 9.21 A pole vaulter is holding a pole horizontally with both hands. The center of gravity is to the left side of the vaulter.
In order to get his car out of the mud, a man ties one end of a rope to the front bumper and the other end to a tee 15 m away as shown below. He then pulls on the center of the rope with a force of 400 N, which causes its center to be displaced 0.30 m, as shown. What is the force of the rope on the car?
A 30 m long weightless beam has an 82 kg mass resting on one end and a 64 kg mass on theother end. How far from the 64 kg mass should a fulcrum be located to balance to balance thebeam?
a horizontal rod (m=5.2 kg) is hinged to a wall at the left end and three forces are acting on the rod as shown in the figure: the force of gravity (mg), a tension force (T), and the force exerted by the hinge (broken into components Fx and Fy) If theta = 35 degrees, what must T be equal to in order to keep the rod static?
One end of a uniform beam that weighs 3.50 ✕ 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in the figure below. Find the tension in the cable. (Assume ?1 = 20° and ?2 = 37°.) Note: The answer is 244 N but I have no idea how to get there. Any help would be appreciated. Thanks.
Jack and Rose are carrying a uniform rod that is 3.00m long and weighs 160.N. If Rose lifts at one end with an upward force equal to 60.0N, how far from Rose should Jack lift so that the rod will be horizontal and in equilibrium?
A heavy beam is 6.00m long and weighs 250N. It is hinged at one end and held so that it is 30° below the horizontal using a pivot at the left end of the beam. How much torque is produced about the pivot from the weight of the beam?