4.54 WP An air-conditioning system is shown in Fig. P4.54 in which air flows over tubes carrying Refrigerant 134a. Air enters with a volumetric flow rate of 50 m³/min at 32°C, 1 bar, and exits at 22°C, 0.95 bar. Refrigerant enters the tubes at 5 bar with a quality of 20% and exits at 5 bar, 20°C. Ignoring heat transfer at the outer surface of the air conditioner, and neglecting kinetic and potential energy ef- fects, determine at steady state a. the mass flow rate of the refrigerant, in kg/min. b. the rate of heat transfer, in kJ/min, between the air and refrigerant.

4.54 WP An air-conditioning system is shown in Fig. P4.54 in which air flows over tubes carrying Refrigerant 134a. Air enters with a volumetric flow rate of 50 m³/min at 32°C, 1 bar, and exits at 22°C, 0.95 bar. Refrigerant enters the tubes at 5 bar with a quality of 20% and exits at 5 bar, 20°C. Ignoring heat transfer at the outer surface of the air conditioner, and neglecting kinetic and potential energy ef- fects, determine at steady state a. the mass flow rate of the refrigerant, in kg/min. b. the rate of heat transfer, in kJ/min, between the air and refrigerant.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In an air conditioning system running at steady-state, m ̇ = 0.7 kg/s of refrigerant 3 134a in saturated liquid state at 48◦C flow through a throttling valve reducing its pressure to a value of p4 = 4 bars. The system is shown in Fig. 1. Then the refrigerant flows through the internal side of a heat exchanger exiting at saturated vapor with p5 = p4. Air enters the external side of the heat exchanger at T1 = 300 K and exits at T2 = 295 K moved by a fan ̇ Figure 1: Problem 1 that consumes WCV = 0.15 kW. Determine the mass flow rate of the air, in kg/s
A steam turbine operates with an inlet condition of 30 bar, 400 0C, 160 m/s and an outlet state of a saturated vapour at 0.7 bar with a velocity of 100 m/s. The mass flow rate is 1200 kg/min and the power output is 10800 kW. present process is on T-V diagram. Determine the magnitude and direction of the heat transfer rate in kJ/min if the potential energy change is negligible.
A steam turbine operates with an inlet condition of 30 bar, 400 °C, 160 m/s and an outletstate of a saturated vapour at 0.7 bar with a velocity of 100 m/s. The mass flow rate is1200 kg/min and the power output is 10800 kW. Present the process on the T-v diagram.Determine the magnitude and direction of the heat-transfer rate in kJ/min if the potentialenergy change in negligible.
A steam turbine operates between inlet conditions of 30 bar, 400 ° C, 160m / s and an outlet corresponding to saturated steam at 0.7 bar and a speed of 100 m / s. The mass flow is 1,200 kg / min, and the power output is 10,800 kW. Determine the magnitude and direction of the heat transferred in kJ / min, if the change in potential energy is negligible.
Assume 9.84 lb/sec of fluid enter a steady-state, steady-flow system with P₁ = 107.18 psia, p₁ = 0.379 lb/ft³, u₁ = 94.7 fps, u₁ = 793.87 BTU/lb, and leave with P2 = 28.47 psia, p2 = 0.122 lb/ft³, u2 = 450.93 fps, and u2 = 750.79 BTU/lb. During the passage through the open system, each pound rejects 10.6 BTU of heat. Determine the work in hp.
A turbine operating under steady flow conditions receives steam at the following state:p1 = 1.5 bar, v1 = 0.038 m3/ kg, C1 = 115 m/s and u1 = 915 kJ/kg and at the exit are p2 =5.5 bar, v2 = 0.18 m3/kg, C2 = 195 m/s and u2 = 715 kJ/kg. During the passage, the fluidrejects 850 kJ/hr heat. If the rate of steam flow is 1368 Kg/hr. Evaluate the powerdeveloped by the turbine in kW.
An insulated mixing chamber receives 2 kg/skg/s R-134a at 1 MPa, 100 ∘C in a line (state-3). Another line brings 1 kg/s of R-134a as saturated liquid at 70 ∘C (state-1), which is throttled to a pressure of 1 MPa (state-2) before it enters the mixing chamber. At the exit (state-4), the pressure is 1 MPa. a)Determine the entropy generated by the mixing chamber, (S˙gen,mixing). b)Determine the entropy generated in the system’s universe (S˙gen,univ).
Ten lbm per min of fluid is handled in a reversible steady flow manner by a thermodynamic system located where the local g = 32 ft/s2. For the liquid, p1 = 20 psia, p2 = 80 psia, ρ1= 1.6 lbm/ft3, ρ2 = 0.32 lbm/ft3, v1 = 400 ft/s, v2 = 600 ft/s, u1 = 130 BTU/lbm, u2 = 130 BTU/lbm. During passage through the system, the fluid rejects 50 BTU/s as heat and rises 175 ft in elevation. What is the change in kinetic energy in BTU? Select one: a. 23.56 b. 29.34 c. 34.56 d. 39.95
Ten lbm per min of fluid is handled in a reversible steady flow manner by a thermodynamic system located where the local g = 32 ft/s2. For the liquid, p1 = 20 psia, p2 = 80 psia, ρ1= 1.6 lbm/ft3, ρ2 = 0.32 lbm/ft3, v1 = 400 ft/s, v2 = 600 ft/s, u1 = 130 BTU/lbm, u2 = 130 BTU/lbm. During passage through the system, the fluid rejects 50 BTU/s as heat and rises 175 ft in elevation. During passage through the system, the fluid rejects 50 Btu/s as heat and rises 175 ft in elevation. Determine the work in the system, in BTU. Select one: a. – 675.2 b. – 781.8 c. 892.6 d. 987.4
A non-flow reversible process occurs for which pressure and volume are correlated by the expression p = (V2 + 6/V) where p is in bar and V is in m³. What amount of work will be done when volume changes from 3 to 5 m³?
Air enters a compressor operating at steady state at 14.7 lbf/in.2 and 60°F and is compressed to a pressure of 150 lbf/in.2 As the air passes through the compressor, it is cooled at a rate of 10 Btu per lb of air flowing by water circulated through the compressor casing. The volumetric flow rate of the air at the inlet is 5000 ft3/min, and the power input to the compressor is 700 hp. The air behaves as an ideal gas, there is no stray heat transfer, and kinetic and potential effects are negligible. Determine (a) the mass flow rate of the air, lb/s, and (b) the temperature of the air at the compressor exit, in °F.
Refrigerant 134a enters an insulated diffuser as a saturated vapor at 60oF with a velocity of 1000 ft/s. The inlet area is 1.4 in2. At the exit, the pressure is 400 lbf/in2 and the velocity is negligible. The diffuser operates at steady state and potential energy effects can be neglected.Determine the mass flow rate, in lb/s, and the exit temperature, in oF.