5. A 3-phase full-wave bridge rectifier is built using six power diodes numbered 1 to 6. The phase sequence of the 3-phase source is ABC and the line to line voltage is 208 V. The line to neutral voltage of phase A has an angle of -30 degrees. The anodes of the diodes 1, 2, 3 are connected to phase A, B, and C, respectively, and the cathodes of diodes 1, 2, and 3 are connected to a common terminal that serves as the positive terminal of the rectifier's output. The cathodes of diodes 4, 5, and 6 are connected to phase A, B, and C, respectively, and the anodes of diodes 4, 5, and 6 are connected to a common terminal that serves as the negative terminal of the rectifier's output. If diodes 1 and 4 are damaged and act as an open circuit, what would the RMS voltage be at the load?

5. A 3-phase full-wave bridge rectifier is built using six power diodes numbered 1 to 6. The phase sequence of the 3-phase source is ABC and the line to line voltage is 208 V. The line to neutral voltage of phase A has an angle of -30 degrees. The anodes of the diodes 1, 2, 3 are connected to phase A, B, and C, respectively, and the cathodes of diodes 1, 2, and 3 are connected to a common terminal that serves as the positive terminal of the rectifier's output. The cathodes of diodes 4, 5, and 6 are connected to phase A, B, and C, respectively, and the anodes of diodes 4, 5, and 6 are connected to a common terminal that serves as the negative terminal of the rectifier's output. If diodes 1 and 4 are damaged and act as an open circuit, what would the RMS voltage be at the load?

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.2P: The temperature dependence of resistance is also quantified by the relation R2=R1[ 1+(T2T1) ] where...

See similar textbooks

Similar questions

How is a solid-state diode tested? Explain.
What is the difference between a diode and rectifier?
What is CEMF?
The temperature dependence of resistance is also quantified by the relation R2=R1[ 1+(T2T1) ] where R1 and R2 are the resistances at temperatures T1 and T2, respectively, and is known as the temperature coefficient of resistance. If a copper wire has a resistance of 55 at 20C, find the maximum permissible operating temperature of the wire if its resistance is to increase by at most 20. Take the temperature coefficient at 20C to be =0.00382.
A 3-phase full-wave bridge rectifier is built using six power diodes numbered 1 to 6. The phase sequence of the 3-phase source is ABC and the line to line voltage is 440 V. The line to neutral voltage of phase A has an angle of -30 degrees. The anodes of the diodes 1, 2, 3 are connected to phase A, B, and C, respectively, and the cathodes of diodes 1, 2, and 3 are connected to a common terminal that serves as the positive terminal of the rectifier's output. The cathodes of diodes 4, 5, and 6 are connected to phase A, B, and C, respectively, and the anodes of diodes 4, 5, and 6 are connected to a common terminal that serves as the negative terminal of the rectifier's output. If diode 1 is damaged and acts as an open circuit, what would the RMS voltage be at the load?
A 3-phase full-wave bridge rectifier is built using six power diodes numbered 1 to 6. The phase sequence of the 3-phase source is ABC and the line to line voltage is 208 V. The line to neutral voltage of phase A has an angle of -30 degrees. The anodes of the diodes 1, 2, 3 are connected to phase A, B, and C, respectively, and the cathodes of diodes 1, 2, and 3 are connected to a common terminal that serves as the positive terminal of the rectifier's output. The cathodes of diodes 4, 5, and 6 are connected to phase A, B, and C, respectively, and the anodes of diodes 4, 5, and 6 are connected to a common terminal that serves as the negative terminal of the rectifier's output. If diodes 2 and 5 are damaged and act as an open circuit, what would the RMS voltage be at the load?
In a 1-phase full wave bridge rectifier with Vs = Vm sin ωt, with R load & ideal diodes. The expression for the average value of the output voltage is 2Vm/π Select one: True False
A number of diodes rated at 1620 V each are to be connected in series in a rectifier circuit with a maximum voltage of 3000V. A de-rating factor of 15% is recommended. The maximum difference in leakage current of the diodes is given as 10mA , and the maximum difference in stored charge is 20µC. Calculate, 1) the number of diodes that must be used, 2) a suitable component value for the static equalization circuit; 3) a suitable component value for the dynamic equalization circuit.
Determine Q-point for the diodes in the circuit given below using the ideal diode model where, R1 = 12.2 kΩ, R2 = 16 kΩ, and R3 = 14 kΩ. (Note: Label the diodes from left to right.)
A load is connected in the Full Bridge rectifier circuit (Four Diodes). Usedtransformer primary voltage value is 220 V (rms). The transformer winding ratio is 1:10.Using the 0.7 V model of the diode,Load Rating: 7 K Ohmsa) How many % of conduction does each diode branch stay on?b) Find the average values of the load voltage.c) Find the average values of the load current.d) Find the effective value of the load voltage.e) Find the effective value of the load current.
An FWR using a centre-tapped Transformer Supplies an average voltage of 120V to a 250 kΩ load Calculate (a) the peak value of output voltage (b) The required Transformer secondary voltage (rms value) (c) Average Current delivered to load (d) Average current through each of the diodes. (e) Peak Current through each of the diodes (f) PIV requirements for each of the diodes. AC supply voltage is 230V and assume ideal diodes.
3. It is required to design a full-wave rectifier circuit using the circuit shown below to provide an average output vol tage of10 V. find the required turns ratio of the transformer. Assume that a conducting diode has a voltage drop of0.7 V. The ac line vol tage is120 Vrms.