This is a subject of strength of materialsShow complete solution and clear hand writing no shortcut plsshoe free body diagram and pressure diagram thank you 5. Segment AB of the bar is a tubewith an outer diameter of d1 and awall thickness of 0.125 in. SegmentBC is a solid rod of diameter d2. Theaverage normal stresses must notexceed 3400 psi in rod AB and 6500in rod BC, respectively. Use P1 = 2,850Ib. and P2 = 4,850 lb.%3D0.125 in.diP2-Pi6 in.-6 in.Determine the smallestallowable value of d1 (ininches). Round-off to 2-decimal places. *Your answer Determine the smallestallowable value of d2 (ininches). Round-off to 2-decimal places. *Your answer

Given Allowable stress in rod AB = 3400 psi Outer diameter = d1 Inner diameter = d1 - 0.125…

Answered: 5. Segment AB of the bar is a tube with…

5. Segment AB of the bar is a tube with an outer diameter of d1 and a wall thickness of 0.125 in. Segment BC is a solid rod of diameter d2. The average normal stresses must not

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.5.3P: A solid circular bar is fixed at point A. The bar is subjected to transverse load V = 70 lb and...

See similar textbooks

Related questions

Q: ged parabolic arc the max, bendin

Q: As seen in the figure below, an object of mass m is attached to a cantilever beam of length L and un...

A: given; static deflection at distance x of beam y(x)=A2L3(3Lx2-x3)

Q: The three primary dimensions mainly used in hydraulics are length, force and temperature. Both syste...

A: It is false that the three primary dimensions mainly used in hydraulics are length, force and temper...

Q: all at A and swings in a vertic wing that it can withstand a

A: given:

Q: PQRS is a four bar chain with link PS fixed. The lengths of links are PQ=56.3mm; QR=120mm; RS=102.3m...

A: Acceleration = a = aT + aR aT is Tangential Acceleration aR is Radial acceleration

Q: A part surface is machined using single point cutting tool with feed rate of 0.3 mm/ rev. Given that...

A: Calculated nose radius of the cutting tool.

Q: Derive the Casimir force in massless scalar field theory in d+ 1-dimensional space- time (d spatial ...

A: In Casimir's unique paper, he didn't involve the outcome in condition. However in a more late infere...

Q: What are the different characteristics of materials? Define each shortly

A: The characteristics of the materials are the mechanical, thermal, optical and electrical properties...

Q: A machine member is subjected to fluctuating stress O =0, cos(8 t). The endurance limit of the mater...

A: GIVEN DATA - σ=σo cos(8πt) σe=350MPa FACTOR OF SAFETY N=3.5 WE HAVE TO FIND VALYE OF ALLOWABLE STRES...

Q: The refrigerator is operated by solar heat where the temperature reached is 120°C. Q.14 In a vapour ...

A: GIVEN DATA - REFRIGERATION TEMPRATURE -10'C SOLAR HEAT GENERATION TEMPRATURE 120'C SINK TEMPRATURE 5...

Q: F2–6. If force F is to have a component along the u axis of F,=6 kN, determine the magnitude of F an...

Q: A head reading of 827 mm Hg (abs) is being compared to 1.73 m H2O (gauge). Which of these is true? ...

Q: Use method of joint to solve for the force reactions at members BC and AC Use method of section to s...

Q: energy basec 80 kJ of hea 0 kJ of heatt s to he desi

Q: Determine the speed of B if A is moving downward with a speed of vA=4m/s at the instant shown. (Figu...

Q: Archimedes established his principle while investigating suspected fraud in the construction of a cr...

Q: A bent bar ABC has a force F = 80 lb applied at end A and directed toward point D in the xy plane. •...

Q: Determine the absolute maximum shear stress in the shaft. Express your answer to three significant f...

Q: PROBLEM 2: Determine Pand 6 so that the three forces shown are equivalent to the single force R = 85...

A: Given data, R is resultant where R= 85i + 20j kN Need to find P and θ

Q: Solve for the reactions on the supports A,B,C & D of the two loaded Beams shown Below.

Q: The structure shown supports a distributed load of 700 Ib/ft. Assume a - 4.1 ft b-1.0 ft. c-2.1 ft, ...

Q: angle of bite in radians is??

A: Given; In a single pass rolling process using d=412 mmR=206 mmwidth,b=120mmthickness,t=8mmreduction,...

Q: A 'U' tube is made of two capillary tubes; one 2 mm in diameter and other 4 mm in diameter. The tube...

A: We have the following information from the question: Diameter, d1 = 2 mm Diameter, d2 = 4 mm Surfac...

Q: Q7. What is the stress concentration for shear stress due to torsion at the critical location? (Sele...

Q: Triangular gate having a horizontal base of 1 30 m and an altitude of 2 m is inclined 45 o from the ...

Q: The system is released from rest with no slack in the cable and with the spring stretched 290 mm. De...

Q: A glass tube of internal diamoter 3mm is immersed in mercury. The angle of contact of mercury with g...

A: Given that, Diameter, d=3 mm Surface tension of liquid, σ=0.48 N/m We have to find: What will be the...

Q: ninar flow o ver a flat plate thickness at the end of th for the same free stream v watcr and air ar...

Q: dentify one or two situations in which fluid mechanics can be applied in industry. Use diagrams or d...

A: Fluid mechanics is the branch of science that deals with the study of fluid in a state of rest or mo...

Q: s 80 kJ of 70 kJ of he

Q: The position of a particle travelling along the x-axis is given by (2 t2 + 3t) (m) where t is in X =...

Q: stcady, fully developed low in mm. Over a section of length 5m of Pa is observed. The average wall s

Q: Three tanks contain water at 20 °C and air as shown in Figure. The three tanks have open connections...

Q: A pulley of radius 20 cm starts from rest -1 in 5s. and reaches a speed of 30 rad.S How many revolut...

A: Find the revolutions in 5 seconds Given data:- Angular speed = 30 rad/sec Radius = 20 cm

Q: ook Sour innr

A: given:T1=300kQ1=1000KJT2=303K

Q: The rigid beam is supported by a pin at A and wires BD and CE (made of steel, E=200 GPa, and the cro...

A: The elongation of the wire CE is, δCE=10 mm Thus, the normal strain the wire CE is, εCE=δCELCEεCE=10...

Q: Refrigerant 22 is the working fluid in an ideal vapor-compression refrigeration cycle that communica...

Q: Based from the illustration, determine the direction indices of C +z D B +y 1'1 1 +x -/2

A: The Direction Indices of C is calculated as the shown in image .

Q: Given the beam shown with computed reactions and a cross section. Determine the maximum compressive...

Q: In a single pass rolling process using 412mm diameter steel rollers, strip of width 120mm and thickn...

A: Given: The diameter of rolling rollers is d=412 mm. The width of strip is w=120 mm. The thickness o...

Q: Two blocks are connected by a pulley system shown in the figure below. Neglect friction between the ...

A: The free-body diagram of the system is given below,

Q: A diesel engine operating on the air-standard Diesel cycle has six cylinders of 100 mm bore and 120 ...

A: Any internal-combustion engine in which air is compressed to a high enough temperature to ignite die...

Q: A centrifugal pump draws water from a 38cm pipe from an open reservoir in which the water surface is...

Q: An aluminum rod is rigidly attached between bronze rod and steel rod as shown. Axial loads are appli...

A: Given: The maximum value of stress in steel is σs=120 Mpa. The maximum value of stress in aluminum ...

Q: 2 A risk curve for AIS 2+ Injury due to delta-v has the coefficients α = -8.22 and β = 0.242. Given ...

A: A risk curve for AIS 2+ Injury due to delta-v has the coefficients α = -8.22 and β = 0.242. Given a...

Q: (b) 5 kN 4 m B 5 kN 4 m C D 2 m

Q: A locomotive semi-elliptical laminated spring has an overall length of 1.3 m and sustains a load of ...

A: Given data:The Overall length of semi-elliptical spring, 2L1=1.3 m or 1300 mmcentral band, l=105 mmσ...

Q: The humidity

A: Given data; Total pressure,p=750 mm of HgPartial pressure,pv=20mm of HgWe have to find teh humidit...

Q: 80 090- Ø40 16 20 R 20- is 3.14 i 18. 13.

Q: Choose from the list below the expression that does NOT correspond to the Eulerian conservation of m...

Concept explainers

Free Body Diagram

The system of forces acting on a body tends to either rotate it or make the body undergo motion. In general, when an external agent exerts a force on a body, the body undergoes translational motion and rotational motion. The body has six degrees of freedom under the influence of that force. Here, three degrees of freedom are from the translational motion while the other three are from the rotation motion. However, sometimes the bodies are not allowed to undergo any motion and are fixed, under such conditions the body is said to be constrained.

Question

This is a subject of strength of materials

Show complete solution and clear hand writing no shortcut pls

shoe free body diagram and pressure diagram thank you

5. Segment AB of the bar is a tube
with an outer diameter of d1 and a
wall thickness of 0.125 in. Segment
BC is a solid rod of diameter d2. The
average normal stresses must not
exceed 3400 psi in rod AB and 6500
in rod BC, respectively. Use P1 = 2,850
Ib. and P2 = 4,850 lb.
%3D
0.125 in.
di
P2
-Pi
6 in.-
6 in.
Determine the smallest
allowable value of d1 (in
inches). Round-off to 2-
decimal places. *
Your answer

Determine the smallest
allowable value of d2 (in
inches). Round-off to 2-
decimal places. *
Your answer

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
, An arm A BC lying in a horizontal plane and supported at A (see figure) is made of two identical solid steel bars AB and BC welded together at a right angle. Each bar is 22 in. long. (a) Knowing that the maximum tensile stress (principal stress) at the top of the bar at support A due solely to the weights of the bars is 1025 psi, determine the diameter d of the bars. (b) If the allowable tensile stress is 1475 psi and each bar has a diameter d = 2.0 in,, what is the maximum downward load P that can be applied at C(in addition to self-weight
An elevated jogging track is supported at intervals by a wood beam AB (L = 7.5 ft) that is pinned at A and supported by steel rod BC and a steel washer at B. Both the rod (dBC= 3/16 in.) and the washer (dB= 1.0 in.) were designed using a rod tension force of TBC=415 lb. The rod was sized using a factor of safely of 3 against reaching the ultimate stress tru— 60 ksi. An allowable bearing stress sba= 565 psi was used to size the washer at B. A small platform HF is suspended below a section of the elevated track to support some mechanical and electrical equipment. The equipment load is uniform load q = 50 lb/ft and concentrated load WE= 175 lb at mid-span of beam HF. The plan is to drill a hole through beam ABaX £land install the same rod (dBC) and washer) dB) at both D and F to support beam HF. (a) Use s and to check the proposed design for rod DF and washer d,: are they acceptable? (b) Re-check the normal tensile stress in rod BC and bearing stress at 8 if either is inadequate under the additional load from platform HF. Re-design them to meet the original design criteria.
A capped cast-iron pipe is compressed by a brass rod, as shown. The mil is turned until it is just snug, then add an additional quarter turn to pre-compress the cast-iron pipe. The pitch of the threads of the bolt ap = 52 mils (a mil is one-thousandth of an inch). Use the numerical properties provided. (a) What stresses a and arwill be produced in the cast-iron pipe and brass rod. respectively, by the additional quarter turn of the nut? (b) Find the bearing stress ahbeneath the washer and the shear stress t(in the steel cap.
Because of foundation settlement, a circular tower is leaning at an angle a to the vertical (see figure). The structural core of the tower is a circular cylinder of height ft, outer diameter d2, and inner diameter d1.For simplicity in the analysis, assume that the weight of the tower is uniformly distributed along the height. Obtain a formula for the maximum permissible angle a if there is to be no tensile stress in the tower.
A hollow, circular, cast-iron pipe (Ec =12,000 ksi) supports a brass rod (Ec= 14,000 ksi} and weight W — 2 kips, as shown. The outside diameter of the pipe is dc= 6 in. (a) If the allowable compressive stress in the pipe is S00O psi and the allowable shortening of the pipe is 0.02 in., what is the minimum required wall thickness trmm? (Include the weights of the rod and steel cap in your calculations.) (b) What is the elongation of the brass rod Srdue to both load Wand its own weight? (c) What is the minimum required clearance h?
A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the figure. The diameter dBof the bar is 1/4 in., the diameter D Wof the washers is 7/8 in., and the thickness is of the fiberglass deck is 3/8 in. If the allowable shear stress in the fiberglass is 300 psi, and the allowable bearing pressure between the washer and the fiberglass is 550 psi, what is the allowable load P allowon the tie-down?
At a point on the web of a girder on an overhead bridge crane in a manufacturing facility, the stresses arc known to be x = —4300 psi, a = 1700 psi, and r = 3100 psi (the sign convention for these stresses is shown in Fig, 7-1). A stress clement located at the same point in the structure (but oriented at a counterclockwise angle 0, with respect to the _y axis) is subjected to the stresses shown in the figure {b, r», and 2100 psi). Assuming that the angle 8Xis between zero and 90°, calculate the normal stress trA, the shear stress ta, and the angle Bv
- A specimen used in a coupon test has norm al stress ??. = 15 MPa (see figure). Using Mohr’s circle, find the state of stress on the element oriented at angle ? = 20° and show the full stress state on a sketch of a properly oriented element.
An aluminum pole for a street light weighs 4600 N and supports an arm that weighs 660 N (see figure). The center of gravity of the arm is 1.2 m from the axis of the pole, A wind force of 300 N also acts in the (y) direction at 9 m above the base. The outside diameter of the pole (at its base) is 225 mm, and its thickness is 18 mm. Determine the maximum tensile and compressive stresses o, and e1., respectively, in the pole (at its base) due to the weights and the wind force.