5. Three masses are attached to a uniform meter stick, as shown in (Figure). The mass of the meter stick is 150.0g and the masses to the left of the fulcrum are m1=50.0gm and m2=75.0g.Find the mass m3 that balances the system when it is attached at the right end of the stick, and the normal reaction force at the fulcrum when the system is balanced.

5. Three masses are attached to a uniform meter stick, as shown in (Figure). The mass of the meter stick is 150.0g and the masses to the left of the fulcrum are m1=50.0gm and m2=75.0g.Find the mass m3 that balances the system when it is attached at the right end of the stick, and the normal reaction force at the fulcrum when the system is balanced.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.4.14P: A crane boom of mass 450 leg with its center of mass at C is stabilized by two cables AQ and BQ (Ae=...

See similar textbooks

Similar questions

The inclined ladder AB supports a house painter (85 kg) at C and the weight iq = 40 K/m} of the ladder itself. Each ladder rail (t5= 4 mm) is supported by a shoe (ts= 5 mm) that is attached to the ladder rail by a bolt of diameter d = 8 mm
A cylindrical brick chimney of height H weighs w = 825 lb/ft of height (see figure). The inner and outer diameters are d1= 3 ft and d2= 4 ft, respectively. The wind pressure against the side of the chimney is p = 10 lb/ft2 of projected area. Determine the maximum height H if there is to be no tension in the brickwork.
A frame ABC travels horizontally with an acceleration a0(see figure). Obtain a formula for the maximum stress emax in the vertical arm AB, which has length thickness t, and mass density p.
Solve the preceding problem for the following data: b = 6 in., b = 10 in, L = 110 ft, tan a = 1/3, and q = 325 lb/ft.
A crane boom of mass 450 leg with its center of mass at C is stabilized by two cables AQ and BQ (Ae= 304 mm2 for each cable) as shown in the figure. A load P = 20 KN is supported at point D. The crane boom lies in the y-z plane. (a) Find the tension forces in each cable: TAQand TBQ(kN}. Neglect the mass of the cables, but include the mass of the boom in addition to load P. (b) Find the average stress (s) in each cable.
A truck of mass 3 tonnes runs into a buffer stop having three buffer springs each of 40 kN/cm stiffness connected in parallel. Find the maximum compression of the springs, and the load if the wagon is travelling at 60 kmph. 1-Equivalent Stiffness of spring in kN/mm is 2-Kinetic Energy in kNmm is 3-The maximum compression of the spring in mm is 4-Load acting on the spring in kN is
The circular bar shown in the figure is vertical.fixed by the support at point A in the plane. AThe spring constant connected to the support is k = 40 N/m. Broadcastingundeformed length, arc between circle ABis the distance. C fitting (bracelet) with a mass of 200 grams,connected to the spring and move in a frictionless circle bar.can. When the union is θ = 30° from the rest positionis being released. In this case, relative to point B of the fittingthe highest height it can reach and the highestcalculate the speed
Question 3) The position of the head and neck and the forces acting on the head are shown in the figure. The center of gravity of the head of mass m=8 kg is located at point C. Neck muscle strength of FM=130 N, which makes an angle of γ=65° with the vertical from the B point to the skull, is affected by the neck extensor muscles. The center of the atlantooccipital joint is located at point B. For this flexion position of the head, the FJ joint reaction force, which makes an α angle with the horizontal from point A, acts. (Take the gravitational acceleration g as 9.81 m/s2). Accordingly; a) Calculate the angle α of the FJ joint reaction force with the horizontal. Response b) Calculate the FJ joint reaction force. (Write your result in N.) Answer
Three masses are attached to a uniform meter stick, as shown in figure. The mass of the meter stick is 150.0 g and the masses to the left of the fulcrum are m1 = 50 kg, m2 = 75 kg, and m3 that balances the system when it is attached at the right end of the sticky, and the normal reaction force at the fulcrum when the system is balanced. Also, find the mass m3.
A 2.3 m long stick with a uniform mass distribution extends horizontally from abuilding. There are two wires attached to the stick, wire A is attached to the beam 3/5 of theway from the building to the end of the stick, it pulls up at a 63° angle to the stick; wire B isattached 1/6 of the way from the building to the end of the stick, and pulls it down at a 32° angle to the stick.The tension in cable a is 112 N. What is the tension on wire B?
The shaft in the figure, carrying three unbalanced masses, is rotating at a constant speed hızla = 10 r / s. Find the balancing values (kg.mm) and their positions in case of balancing in DI and DII planes.
The system in the Figure is in equilibrium. A mass M1 = 246.0 kg hangs from the end of a uniform strut which is held at an angle theta = 40.0o with respect to the horizontal. The cable supporting the strut is at angle alpha = 24.4o with respect to the horizontal. The strut has a mass of 58.2 kg. Find the magnitude of the tension T in the cable. Find the magnitude of the horizontal component of the force exerted on the strut by the hinge? Find the magnitude of the vertical component of the force exerted on the strut by the hinge?