Modulus Rigidity its 80GPa 5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaxial win asolid steel shaft of 50 mm diameter and of the same length as the hollow shaft. Theseshaft are then fastened rigidly together at their ends. The compound shaft transmits atotal torque of 5693 Nm. Calculate:5.2.1The torque transmitted by the steel and the bronze shaftsThe shear stress induced in both steel and bronze shafts5.2.2The angle of rotation in degrees of the compound shaft.The stiffness of the compound shaft5.2.35.2.4

Outer diameter, Do=75 mmInner diameter, Di=50 mmDiameter of steel shaft, D=50 mmT=5693 N.m Note:…

5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaXlal WiU. solid steel shaft of 50 mm diameter and of the same length as the hollow shaft. Thes shaft are then fastened rigidly together at their ends. The compound shaft transmits total torque of 5693 Nm. Calculate: 5.2.1 The torque transmitted by the steel and the bronze shafts The shear stress induced in both steel and bronze shafts 5.2.2 5.2.3 5.2.4 The angle of rotation in degrees of the compound shaft. The stiffness of the compound shaft

5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaXlal WiU. solid steel shaft of 50 mm diameter and of the same length as the hollow shaft. Thes shaft are then fastened rigidly together at their ends. The compound shaft transmits total torque of 5693 Nm. Calculate: 5.2.1 The torque transmitted by the steel and the bronze shafts The shear stress induced in both steel and bronze shafts 5.2.2 5.2.3 5.2.4 The angle of rotation in degrees of the compound shaft. The stiffness of the compound shaft

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A motor driving a solid circular steel shaftwith diameter d = 1.5 in. transmits 50 hp to a gear atB. The allowable shear stress in the steel is 6000 psi.Calculate the required speed of rotation (number ofrevolutions per minute) so that the shear stress in theshaft does not exceed the allowable limit.
The rotation or twist in degrees of a shaft, 800 mm long subjected to a torque of 80 N-m, 20 mm in diameter and shear modulus G of 80,000 MPa is:
A steel tube with outer and inner diameters are 86mm and 52mm respectively is twisted by torques at the ends. What is the diameter of a solid steel shaft that resists the same torques at the same maximum shear stress.
A hollow shaft has to be designed for a marine engine delivering 1200 kW when running at 120 r/min. The maximum allowable shear stress is 50 MPa and the maximum torque to be transmitted by the shaft is 30 % greater than the mean torque. The internal diameter of the shaft is 50 % that of the external diameter. Calculate the shaft dimensions and the angle of twist of the shaft over 3 m when transmitting the above torque (G = 80 GPa).
A composite shaft is comprised of an inner solid steel shaft 1/6 ft in diameter slipped over with a hollow bronze shaft of 1/4 ft outer dimater and 1/6 ft inner diameter and of the same length as the steel shaft. The two shafts are then fastened rigidly together at their ends. For steel, G = 12 × 106 psi, and for bronze, G = 6 × 106 psi. What torque can be applied to the composite shaft without exceeding a shearing stress of 12,000 psi in the steel or 8,000 psi in the bronze?
Calculate the maximum and minimum shear stress in a hollow circular shaft of outer diameter 20 mm and thickness 2 mm, subjected to a torque of 92.7 N-m.
A hollow shaft has to be designed for a marine engine delivering 1300 kW when running at 150 r/min. The maximum allowable shear stress is 65 MPa and the maximum torque to be transmitted by the shaft is 20 % greater than the mean torque. The internal diameter of the shaft is 50 % of that of the external diameter. Calculate: (a) the shaft dimensions and (b) the angle of twist of the shaft over 3 m when transmitting the above torque (G = 80 GPa).
A solid shaft in a rolling mill transmits 30kW at 100 rpm. Find the diameter in mm of the shaft so as not to exceed a shearing stress of 80 MPa and an angle of twist of more than 10 degrees in a length of 8 meters. G = 83 GPa
A hollow alluminum shaft, 30ft. long with 15in. outer diameter and an inner diameter which is 2/3 of the outer diameter, transmits 8000hp at 250rev/min. Use G=3.5x10^6psi for aluminum. Calculate (a) the maximum shear stress; (b) the angle of twist of the shaft. -Draw and label the diagram correctly, No diagram in the solution will be marked wrong. -Shortcut solution will be marked wrong.
A hollow steel shafts transmits 200kW of power at 150 rpm. The total angle of twist in a length of 5 m of the shaft is 3Â°. Find the inner and outer diameter of the shaft. If the permissible shear stress is 60 MPa. Modulus of rigidity (C) =80 GPa
A 5 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 180 HP. The shaft speed is 3,000 rpm. The allowable shear stress is 50 ksi and the allowable angle of twist per foot of length is 0.04 radians. Determine the minimum diameter that meets the design requirements.
A solid steel shaft A of 60 mm diameter rotates at 300 rev/min. Find the greatest power that can be transmitted for a limiting shearing stress of 60 MN/m2in the steel. It is proposed to replace A by a hollow shaft B, of the Same external diameter but with a limiting shearing stress of 75 MN/m2. Determine the internal diameter of B to transmit the same power at the same speed.