6000 mm 4500 mm In the figure shown, find the width 'b'of the concrete dam necessary to prevent the dam from sliding. The specific gravity of concrete is 2.44 and the coefficient of friction between the base of the dam and the foundation is 0.3. Use 1.2 as the factor of safety against sliding, Is the dam also safe from overturning?

6000 mm 4500 mm In the figure shown, find the width 'b'of the concrete dam necessary to prevent the dam from sliding. The specific gravity of concrete is 2.44 and the coefficient of friction between the base of the dam and the foundation is 0.3. Use 1.2 as the factor of safety against sliding, Is the dam also safe from overturning?

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter15: Slope Stability

Section: Chapter Questions

Problem 15.28P

See similar textbooks

Similar questions

Two blocks A and B have a weight of 10 lb and 6 lb, respectively. They are resting on the incline for which the coefficients of static friction are μA = 0.15 and μB = 0.25. Determine the angle θ which will cause motion of one ofthe blocks. What is the friction force under each of the blocks when this occurs? The spring has a stiffness of k = 2 lb/ft and is originally unstretched.
A rectangular gravity dam has a height 5 m. It retains 3 mdeep of water. Calculate the minimum width of the concrete damthat is necessary to prevent the dam from sliding. The specificgravity of the concrete is 2.4 and the coefficient of frictionbetween the base of the dam and the foundation is 0.50. Use factorof safety against sliding of 1.5. a. 3.214 m b. 2.345 mc. 1.125 m d. 1.254 m
Two blocks A and B have a weight of 11 lb and 5 lb , respectively. They are resting on the incline for which the coefficients of static friction are μA = 0.16 and μB = 0.25. Determine the angle θ which will cause motion of one of the blocks. What is the friction force under each of the blocks when this occurs? The spring has a stiffness of k = 2 lb/ft and is originally unstretched. Determine the smallest angle and determine the friction force under block A and B under this angle.
The section of a concrete gravity dam is shown in the figure. The depth of the upstream side is 6.0 m. Neglect the hydrostatic uplift and use unit weight concrete equal to 24 kN/m3. The coefficient of friction between the base of the dam and foundation is 0.4. Determine the following: (a) factor of safety against sliding (b) factor of safety against overturning (c)the overturning moment acting against the dam in KN-m.
Explain about the Vane-Shear Test.
Given the ff. data of dynamic lateral force procedure for buildings:Period of vibration: T = 0.8 secSpectral velocity, Sv = 0.15 m/secK = 15 158 kN/mmTotal W = 2400 kN Give the maximum relative displacement,the value of spectral acceleration,value of the lateral force of the tank in kN,the value of the maximum base shear in kN.
ASAP PLS What is the slope at the fixed support? Group of answer choices a. 1 b. 2 c. 0.5 d. 0 The angle of rotation at the maximum deflection is: Group of answer choices a. 0 b. 1 c. 0.5 d. 2
Find the following: - Righting Moment - Overturning Moment - Factor of Safety Against Sliding - Factor of Safety Again Overturning Given: μ = 0.6 γ = 23.50 kN/m^3 b1 = 1.60 m b2 = 4.00 m h1 = 10.00 m h2 = 8.00 m
Use Area moment method Determine the ff. 1.Maximum deflection 2.slope at point a and b 3.Maximum deflection
A 480-kg log is being steadily pulled up the incline by means of the cable attached to the winch on the truck. If the coefficient of kinetic friction is 0.86 between the log and the incline and 0.52 between the cable and rock, determine the tension T which must be developed by the winch. (Answer: T = 8520 N)
Calculate the width of the concrete wall that is necessary to prevent the wall from sliding and the horizontal reaction acting on the system, Rx. The unit weight of the concrete is 23.6 kN/m^3 and the coefficient of friction between the base of the wall and the foundation soil is 0.42. Use 1.5 as the factor of safety against sliding. Will it also be safe from over turning?
The horizontal barshown (Length = 15.0 feet) rests on smooth inclines. Compute the distance x at which load T= 250 lbs should be placed from point B to keep the bar horizontal?