A beam with a simple span of 6 m carries a dead load of 16.36 KN/m exclusive of its own weight and a live load of 40 KN/m as shown. fe =21 MPA, f, =415 MPa, weight of concrete 23.5 KN/m3 The beam has a width of 400 mm and total thickness of 600 mm with effective depth of 540 mm. It is reinforced by 5 - 28 mm o bars. Determine whether the beam is safe to carry the given loads. LL = 40 KN/m 1.80 m 4.20 m 16.36 KN/m (exclusive of weight)

A beam with a simple span of 6 m carries a dead load of 16.36 KN/m exclusive of its own weight and a live load of 40 KN/m as shown. fe =21 MPA, f, =415 MPa, weight of concrete 23.5 KN/m3 The beam has a width of 400 mm and total thickness of 600 mm with effective depth of 540 mm. It is reinforced by 5 - 28 mm o bars. Determine whether the beam is safe to carry the given loads. LL = 40 KN/m 1.80 m 4.20 m 16.36 KN/m (exclusive of weight)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A prismatic beam having 250 mm x 500 mm is reinforced for flexure at the bottom with 5-ϕ20 mm with an effective depth of 380 mm. It is simply supported over a clear span of 5.5 m and designed to support a total factored uniformly distributed load of 32 kN/m over the entire span. Concrete weighs 24 kN/m3, Concrete strength f’c = 21 MPa and rebar strength fy = 280 MPa. Determine the factored shear force at the critical section, distance "d" from the face of support . Determine the nominal concrete shear strenght in kN as per NSCP 2015. Determine the required spacing in mm of 10-mm-dia. stirrups within the critical region of the beam.
Compute the required section modulus Z of a steel beam 5.0 m between simple supports and will carrying 11 cm thick and 100 cm concrete wall weighing 30 kN/m³. Allowable bending stress is 200 MPa and the beam itself weighs 0.5 kN/m.
Compute the required section modulus Z of a steel beam 5.0 m between simple supports and will carrying 110 mm thick and 1000 mm concrete wall weighing 30 kN/m³. Allowable bending stress is 200 MPa and the beam itself weighs 0.5 kN/m.
A prismatic beam having 275 mm x 500 mm is reinforced for flexure at the bottom with 5-ϕ20 mm with an effective depth of 420 mm. It is simply supported over a clear span of 6 m and designed to support a total factored uniformly distributed load of 35 kN/m over the entire span. Concrete weighs 24 kN/m3, Concrete strength f’c = 21 MPa and rebar strength fy = 280 MPa. Determine the required nominal shear force the stirrups must sustain based on the critical shear force at a section located distance "d" from face of support. A. 15.3 B. 28.4 C. 24.2 D. 32.2
A triangular wooden beam width 150 mm base and 300 mm height carries two concentrated load of 20 kN at third points. If the simple span of the beam is 6 m. Compute the maximum shearing stress of the beam. a. 0.58 MPa b. 1.33 MPa c. 0.48 MPa d. 0.86 MPa
A beam 281 mm wide and effective depth 511 mm carries a factored uniformly distributed load of 66 kN/m including its own weight, in addition to a concentrated factored load of 48 kN at midspan. It spans 5.06 m face to face of simple supports. It is reinforced with ρ = 0.67 ρbal for positive bending. Use f’c = 32 MPa and fy = 414 MPa. Calculate the D/C ratio in percentage (%) for the particular beam.
A prismatic beam having 28 mm x 40 mm is reinforced for flexure at thebottom with 3-φ16 mm with an effective depth of 420 mm. It is simplysupported over a clear span of 6 m and designed to support a total factoreduniformly distributed load of 28 kN/m over the entire span. Concrete weighs 21 kN/m3, Concrete strength f’c = 21 MPa and rebar strength fy = 280MPa.1. Determine the factored shear force (kN) at the critical section for shear located a distance"d" from the face of support .
Design of Singly Reinforced Beams 1. A simply supported beam is 6 meters long and is reinforced as shown. f'c is 35mPa and fy is 400mPa. a.) Determine the depth of compression block. b.) Determine the moment capacity of the beam. c.) If the beam has a total dead load of 26k/m, determine the allowable live load the beam could carry.
A reinforced concrete beam has a width of 380 mm, effective depth of 570 mm and carries a uniform live load of 90 kN/m and a uniform dead load of 60 kN/m. The reinforcing steel strength Fy = 276 MPa and specified concrete strength fc'= 21 MPa. The beam has a span of 4.0 meters Which of the following gives the factored uniform load in kN/m? What is the shear at the critical section in kN?
A doubly reinforced beam, which have a base of 310 mm, and an effective depth of 410 mm, is reinforced with steel area of 2263 sq. mm at the bottom, and 1232 sq. mm on the top. Take d' = 70 mm, fc' = 21 MPa, and fy = 345 MPa. b) What is the value of fs' (actual stress of the compression bars)
Solve continuously. A rectangular beam has a width of 300mm and an effective depth of 550mm spand 4.0 meters on fixed supports. It carries unfactored uniform loads of DL = 25 kN/m and LL = 80 kN/m which includes the weight of the beam. It is reinforced for flexure with five 25mm diameter bars that continue uninterrupted to the ends of the span. Using detailed analysis and NSCP 2010, design the shear reinforcement at the critical section using 10mm diameter vertical stirrups. fy = 420 MPa f'c = 28 MPa
A reinforced concrete beam has a width of 380 mm, effective depth of 570 mm and carries a uniform live load of 90 kN/m and a uniform dead load of 60 kN/m. The reinforcing steel strength Fy = 276 MPa and specified concrete strength fc'= 21 MPa. The beam has a span of 4.0 meters Which of the following gives the factored uniform load in kN/m? What is the shear at the critical section in kN? What is the nominal shear strength provided by the web reinforcement in KN? Design shear reinforcement for the entire span.