7 Undisturbed soil sample was collected from the field in steel Shelby tubes for laboratory evaluation. The tube sample has a diameter of 71 mm, length of 558 mm, and a moist weight of 42.5 × 10-³ kN. If the oven-dried weight was 37.85 × 10-³ kN, and G, = 2.69, calculate the following: a. Moist unit weight b. Field moisture content c. Dry unit weight d. Void ratio e. Degree of saturation

7 Undisturbed soil sample was collected from the field in steel Shelby tubes for laboratory evaluation. The tube sample has a diameter of 71 mm, length of 558 mm, and a moist weight of 42.5 × 10-³ kN. If the oven-dried weight was 37.85 × 10-³ kN, and G, = 2.69, calculate the following: a. Moist unit weight b. Field moisture content c. Dry unit weight d. Void ratio e. Degree of saturation

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter3: Weight–volume Relationships

Section: Chapter Questions

Problem 3.10P

See similar textbooks

Similar questions

1. A moist soil sample weighing 0.20 kg having a volume of 200 cm3 and dry unit weight of 16 kN/ m . After mixing water of 65 g, compute the moisture content of the soil.
2A sample of soil obtained from a borrow pit has a wet weight of 16 kg.The total volume occupied by the sample when in the ground was8490cm. A small portion of the sample is used to determine the watercontent. The wet sample weighs 150g. After drying, it weights 125g (a) What is the water content of the sample?(6) Determine the wet and the dry unit weights of the soil in the borrowpit.
An undisturbed specimen of soil has a volume of 300 cm3 and weighs 498 g. After over drying for 24 hours, its weight is reduced to 456 g. Assume G= 2.70 . Determine the degree of saturation in percent. a. 9.21 b. 31.9 c. 43.8 d. 78
For a given soil sample, n= 0.43 and G₁ = 2.66. Calculate the dry unit weight and degree of saturation. Show complete solutions.
A fresh soil sample with a mass of 460 g is collected from the field using a cylinder with diameter of 7.5 cm and height of 7.3 cm. After oven-drying, the soil mass becomes 370 g. What is the apparent specific gravity?
4. An in-situ soil sample weigh 25 kg of 0.02 cubic meter with a moisture content of 7% and specific gravity of 2.8. Determine the following: Moist Unit Weight, Dry Unit Weight, Moist Density, Dry Density, Void Ratio, Porosity, and the Degree of Saturation. (Calculate the Unit Weight and Density in Metric and English Units).
8 The following are results of a field unit weight determination test using sand cone method: Volume of hole = 0.0019 m3 Mass of moist soil from hole = 3.24 kg Water content = 12.01% Max. dry unit weight from a laboratory compaction test = 19.70 kN/m3 Determine the relative compaction, in percent. Round off to two decimal places. Hint: Relative compaction = Field dry unit weight / Max dry unit weight (lab)
The following are results of a field unit weight determination test using sand cone method: Volume of hole = 0.0019 m3 Mass of moist soil from hole = 3.48 kg Water content = 12.43% Max. dry unit weight from a laboratory compaction test = 19.56 kN/m3 Determine the relative compaction, in percent. Hint: Relative compaction = Field dry unit weight / Max dry unit weight (lab)
A fully saturated soil sample has a volume of 28 cc. The sample was dried in oven and the weight of the dry soil pat was found to be 48.76 g. Given G= 2.68. Determine the saturated unit weight of soil in kN/m3.
1. A soil sample has a volume of 5400 cm^3 and mass of 10.45 kg, and the water content of the soil is w = 11%. Determine (a) unit weight , dry unit weight , saturated unit weight, (b) void ratio and porosity, (c) degree of saturation (assume Gs=2.7).
A soil sample has a volume of 5200 cm3 and mass of 10.4 kg. water content of the soil is w = 12%. Determine(a) unit weight, (b) dry unit weight, (c) saturated unit weight, (d) void ratio, (e) porosity, and (f) degree ofsaturation (assume Gs = 2.7).
A soil with a volume of 163cm^3 is sampled from a field. It weighs 221g. Then, the sample was saturated until the pores were filled and now weighs 273g. The sample was drained and weighed 236g. The sample then sat out for about 2 weeks until at equilibrium and weighed 206g. After oven drying the sample, it finally weighed 202g. What is the percent moisture content by mass (theta g) at field capacity %?