7. A force of 400 N is applied to the small piston of area of 0.5 cm³ of a hydraulic press. What is theforce exerted on the large piston with diameter of 20 cm?[25 x10° N]8. In a hydraulic press the smaller piston has a diameter of 40 mm and the larger piston has adiameter of 500 mm.a. What force must be applied to the smaller cylinder to lift a mass of 2000 kg?b. If it is required to lift the 2000 kg mass to 100 mm height, how far must the small pistonmove?[125.57 N, 15.63 m]

Name: 7. A force of 400 N is applied to the small piston of area of 0.5 cm³
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: 7. A force of 400 N is applied to the small piston of area of 0.5 cm³ of a hydraulic press. What is theforce exerted on the large piston with diameter of 20 cm?[25 x10° N]8. In a hydraulic press the smaller piston has a diameter of 40 mm and the lar

Answered: Image /qna-images/answer/e42150ea-3070-4aa0-929a-424211a8a36b.jpg

Answered: 7. A force of 400 N is applied to the…

Science

Physics

7. A force of 400 N is applied to the small piston of area of 0.5 cm of a hydraulic press. What is the force exerted on the large piston with diameter of 20 cm? [25 x10 N]

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter14: Fluid Mechanics

Section: Chapter Questions

Problem 14.8P: The small piston of a hydraulic lift (Fig. P14.8) has a cross-sectional area of 3.00 cm2, and its...

See similar textbooks

Similar questions

(a) Estimate the time it would take to fill a private swimming pool with a capacity of 80,000 L using a garden hose delivering 60 L/min. (b) How long would it take to fill if you could divert a moderate size river, flowing at 5000 m3/s, into it?
The hydraulic system of a backhoe is used to lift a load as shown in Figure 11.45. (a) Calculate the force F the slave cylinder must exert to support the 400-kg load and the 150-kg brace and shovel. (b) What is the pressure in the hydraulic fluid if the slave cylinder is 2.50 cm in diameter? (c) What force would you have to exert on a lever with a mechanical advantage of 5.00 acting on a master cylinder 0.800 cm in diameter to create this pressure? Figure 11.45 Hydraulic and mechanical lever systems are used in heavy machinery such as this back hoe.
Pascal’s Principle and Hydraulics 59. How much pressure is transmitted in the hydraulic system considered in Example 14.3? Express your answer in atmospheres.
Figure 11.35(a) shows the effect of tube radius on the height to which capillary action can raise a fluid. (a) Calculate the height h for water in a glass tube with a radius of 0.900 cm—a rather large tube like the one on the left. (b) What is the radius of the glass tube on the right if it raises water to 4.00 cm?
What fraction of an iceberg floating in the ocean is above sea level? Assume the density of the iceberg is 917 kg/m3.
Suppose the master cylinder in a hydraulic system is at a greater height than the slave cylinder. Explain how this will affect the force produced at the slave cylinder.
A container is filled to a depth of 20.0 cm with water. On top of the water floats a 30.0-cm-thick layer of oil with specific gravity 0.700. What is the absolute pressure at the bottom of the container?
A sump pump (used to drain water from the basement of houses built below the water table) is draining a flooded basement at the rate of 0.750 us, with an output pressure of 3.00105 N/m2. (a) The water enters a hose with a 3.00-cm inside diameter and rises 2.50 m above the pump. What is its pressure at this point? (b) The hose goes over the foundation wall, losing 0.500 m in height, and widens to 4.00 cm in diameter. What is the pressure now? You may neglect frictional losses in both parts of the problem.
What is the difference between flow rate and fluid velocity? How are they related?
What force must exerted on the master cylinder of a hydraulic lift to support the weight of a 2000-kg car (a large car) resting on a second cylinder? The master cylinder has a 2.00-cm diameter and second cylinder has 24.0-cm diameter.
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant, as stated in the text. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
How much pressure is transmitted in the hydraulic system considered in Example 11.6? Express your answer in pascals and in atmospheres.