7. Two reservoirs L & H have elevations of 265 m and 110 m respectively. It is connected by a 25 mm diameter pipe with length of 120 meters. A turbine is installed at a point in between the two reservoirs. Calculate the head extracted by the turbine if Q=150 liters/sec. Use the constant C=120. A. 146.12 m B. 150.35 m C. 127.41 m D. 124.78 8. Compute the power generated by the turbine in number 7 in terms of Kilowatt. A. 221.24 B. 215.02 G. 183.61 D 187 48

7. Two reservoirs L & H have elevations of 265 m and 110 m respectively. It is connected by a 25 mm diameter pipe with length of 120 meters. A turbine is installed at a point in between the two reservoirs. Calculate the head extracted by the turbine if Q=150 liters/sec. Use the constant C=120. A. 146.12 m B. 150.35 m C. 127.41 m D. 124.78 8. Compute the power generated by the turbine in number 7 in terms of Kilowatt. A. 221.24 B. 215.02 G. 183.61 D 187 48

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Calculate the height of the second reservoir (H2), and the pressure head, velocity head and elevation head at point 3 (mid‐point of the pipe). SN=21
Water flows from an upper reservoir to a lower one while passing a turbine as shown. 1. Compute the total head loss due to friction when the discharge is 150 lit/s. a. 4.25 m b. 3.84 m c. 5.67 m d. 2.54 m 2. Find the velocity of water. a. 2.05 m/s b. 4.12 m/s c. 3.06 m/s d. 6.57 m/s 3. Find the power input of the turbine. a. 213.5 kW b. 210.6 kW c. 115.2 kW d. 356.2 kW
9. The depth of flow of water at a section of a rectangular channel of width 2 m is 0.3 m. The discharge through the channel is 1.5 m3/s. Determine the height of hydraulic jump and loss of energy per kg of water.
In Figure, when the pressure heads at A and B are 3.05 m and 89.9 m, respectively, the pump AB adds 75 kW to the system shown. What elevation can be maintained at reservoir D?
A pump draws water at 20 liters per second from reservoir A and lifts it to reservoir B, as shown in Figure . The head loss from A to 1 is three times the velocity head in the 150-mm diameter pipe, and the head loss from 2 to B is fifteen times the velocity head in the 100-mm diameter pipe. 1. Compute the Power delivered by the pump in kw ( A. 79.07 , B. 48.10 C. 13.08 , D. 57.23) 2. Compute the Pressure head at point 1 in m. ( A. 85.96 , B. 19.74 C. 245.09 , D. 45.90) 3. Pressure head at point 2 in m. ( A. 104.51 , B. 246.67 C. 57.84 , D. 12.69)
Two reservoirs are connected as shown in the figure. The difference in Elevation of the two reservoirs is 6.88m. Darcy-Weisbach friction factor for all pipes, f=0.0238. Pipe 1: Length=3500m Diameter=70cm Pipe 2 and 3: Length=1750m Diameter=35cm Compute the discharge in the pipe one in L/s. Compute the discharge in the pipe three in L/s.
A water reservoir of 300 (Height) x 300 (width) x 500 (depth) m has its free surface at 250 m above a bottom outlet orifice of 500 mm in diameter. The velocity coefficient of the orifice is 0.96 and the coefficient of contraction of the flow through the orifice is 0.6. Assume that the reservoir has a cubic shape. Q1. Calculate the velcoity of water in the reservoir when it starts to empty (m/s)
Reservoir B in the figure receives 0.06 m^3/s of flow. Determine the flow in line AD.
Determine the elevation of the upstream reservoir (A) in Figure P4.1.2 if the downstream reservoir(B) is at 750m, the flow rate ((water at 20 ℃) through the smooth concrete pipeline is ,1.2m^3/secgiven the following: pipes 1 and 2: 100m long (D=0.5m) valves 1–2: fully open globe valve expansion 2–3: D=0.5m to 1.0m pipe 3: 100m long (D=1.0m) pipe 5: 50m long (D=0.5m) pipe 6: 50m long (D=0.5m) confusor 4: loss coefficient of 0.3 bend 5–6: loss coefficient of 0.2
The cylinders are piled in a rectangular ditch as shown. Neglecting friction, determine the reaction between cylinder A and the vertical wall
In a hydroelectric power plant, the tailwater level fixes at 480 m. The net head is 27m and head loss is 5% of the gross head. What is the water elevation? a) 508.97m b) 456.7m c) 508.42m d)903.9m
A new 45 cm cast-iron pipe 600 m long carries 260 litres/s from reservoir A, discharging into two new cast-iron pipes each 500 m long. One pipe is 30 cm in diameter and leads to reservoir B, in which the water surface is 5 m lower than in A. If the water surface in C is 7 m lower than that at A, determine the diameter of the pipe leading to C. Use n 0.011.