A chain baving a length of 20 ft and weight of 8l rests on a street for which the coefficient of static friction Ms = 0.2. If a crane is used to hoist the chain, determineforce P it applies to the chain if the length of c remaining on the ground begins to slip when the horizc component of P becomes 10 lb. What length of c remains on the ground? 8-12. A chain having a length of 20 ft and weight of 81rests on a street for which the coefficient of static frictiH = 0.2. If a crane is used to hoist the chain, determineforce P it applies to the chain if the length of cremaining on the ground begins to slip when the horizcomponent of P becomes 10 lb. What length of cremains on the ground?PProb. 8-12335

Answered: Image /qna-images/answer/73465514-4eb3-4c53-a286-050a9ad2649a.jpg

8-12. A chain having a length of 20 ft and weight of 81 rests on a street for which the coefficient of static fricti H = 0.2. If a crane is used to hoist the chain, determine force P it applies to the chain if the length of c remaining on the ground begins to slip when the horiz component of P becomes 10 lb. What length of c remains on the ground? P

8-12. A chain having a length of 20 ft and weight of 81 rests on a street for which the coefficient of static fricti H = 0.2. If a crane is used to hoist the chain, determine force P it applies to the chain if the length of c remaining on the ground begins to slip when the horiz component of P becomes 10 lb. What length of c remains on the ground? P

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.75P: The single-plate clutch transmits the torque C from the input shaft on the left to the output shaft...

See similar textbooks

Similar questions

A homogenous bar with length l and weight w lb rests horizontally as shown in Fig 9-37 with its free end on a block of weight W, the block W is at rest on a plane inclined at the angle α with the horizontal. Determine the necessary coefficient of friction μ between the block and the plane for equilibrium. Assume no friction between the bar and the block. Give solution. [Ans. μ=(sin⁡ 2α) / (w / W+2 cos2 α)]
2. The block has a mass of 5.8 kg and rests on the smooth plane. Determine the unstretched length of the spring. Round to three significant figures.
When the 100-lb block is at h = 3 ft above the cylindrical post and spring assembly, it has a speed of = 20 ft>s. If the post is made of 2014-T6 aluminum and the spring has the stiffness of k = 250 kip>in., determine therequired minimum diameter d of the post to the nearest 1/8 in. so that it will not yield when it is struck by the block
Solve Prob. 10.54 assuming that A and B are connected by a spring of stiffness k = 0.3 W/b and free length b.
The single-plate clutch transmits the torque C from the input shaft on the left to the output shaft on the right. Compression springs between the clutch housing and the pressure plate provide the necessary pressure on the friction surface. The splines prevent the clutch plate from rotating relative to the output shaft. If Ri=4 in. and R0=9 in., determine the total force that must be applied to the pressure plate by the springs if the clutch is to transmit a torque of C=56lbft when it is new.
The pipe is stuck in the ground so that when it is pulled upward the frictional force along its length varies linearly from zero at B to fmax (force/length) at C. Determine the initial force P required to pull the pipe out and the pipe’s elongation just before it starts to slip. The pipe has a length L, cross-sectional area A, and the material from which it is made has a modulus of elasticity E.
The block brake consists of a pin-connected lever and friction block at B. The coefficient of static friction between the wheel and the lever is μs = 0.3, and a torque of 5 N ⋅m is applied to the wheel. Determine if the brake can hold the wheel stationary when the force applied to the lever is (a) P = 30 N, (b) P = 70 N Draw the free-body diagram of the lever.
The driver of the sports car applies his rear brakes and causes the tires to slip. If the normal force on each rear tire is 1800lb and the coefficient of kinetic friction between the tires and the pavement is { { \mu }_{ k }=0.5 }μk=0.5, determine the average shear stress developed by the friction force on the tires. Assume the rubber of the tires is flexible and each tire is filled with an air pressure of 225 kp.
The homogenous bar A having a mass of 18 kg is 2 m long and is inclined at 60 degrees with the horizontal plane. The mass M of 7 kg is connected by the rope to the bar. The rope leaving the bar is horizontal. The coefficient of friction between the rope and the drum B is 0.20. What is the minimum coefficient of friction between the bar and the plane for equilibrium? Give solution. (Ans. coefficient of friction = 0.284)
The ladder has a uniform weight of 80 lb and restsagainst the wall at B. If the coefficient of staticfriction at A and B is μ = 0.4 determine the smallestangle θ at which the ladder will not slip.
A truck is traveling at 40 mph when the brakes are applied on all of its wheels, causing it to skid at about 33 feet before stopping. If the vehicle has a weight of 18 kips. Determine the constant horizontal force developed on the coupling at m, and the frictional force developed between the tires of the vehicle and the road during this time. The total mass of the trailer is 7 kips. Draw the fbd thank you
The 1000-lb concrete block is being lifted using a 10° wedgeunder the action of force P. If the coefficient of staticfriction between all contacts is 0.3, determine themaximum force P required to move the block. (neglect theweight of the wedge) Answer: P = _____________