8. In a steady flow apparatus 135 KJ of work is done by each kg of fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.30 m³/kg, 600 kPa, and 16m/s. The inlet is 32m above the floor and the discharge pipe are at floor level. The discharge conditions are 0.60 m³/kg, 1 bar, and 270 m/s. The total heat loss between the inlet and discharge is 9KJ/kg of fluid. In flowing through this apparatus, does the specific internal energy increase or decrease? And by how much?

8. In a steady flow apparatus 135 KJ of work is done by each kg of fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.30 m³/kg, 600 kPa, and 16m/s. The inlet is 32m above the floor and the discharge pipe are at floor level. The discharge conditions are 0.60 m³/kg, 1 bar, and 270 m/s. The total heat loss between the inlet and discharge is 9KJ/kg of fluid. In flowing through this apparatus, does the specific internal energy increase or decrease? And by how much?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

4. In a steady flow apparatus,135kJ of work is done by each kg of fluid. The specific volume of the fluid, pressure and speed at the inlet are 0.37 m3/kg, 600 kpa, and 16 m/s. The inlet is 32 m above the floor, and the discharge pipe is at floor level. The discharge conditions are 0.62 m3/kg,-100 kpa, and 270 m/s. The total heat loss between the inlet and discharge is 9kJ/kg of fluid. In flowing through this apparatus, does the specific internal energy increase or decrease, and by how much? Draw a figure or FBD that will support the problem. Explain each step by step formula.
Q7. In a steady flow apparatus, 135 kJ of work is done on each kg of fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.37 m³/kg, 600 kPag, and 160 m/s. The inlet is 32 m below the floor, and the discharge pipe is at floor level. The discharge conditions are 0.62 m³/kg, 100kPag, and 27 m/s. The total heat gained between the inlet and discharge is 9 kJ/kg of fluid. In flowing through this apparatus, by how much does the specific internal energy increase or decrease?
In a steady flow apparatus, 135 kJ of work is done by each kg fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.37 m^3/kg, 600 kPa, and 16 m/s. The inlet is 32 m above the floor, and the discharge pipe is at the floor level. The discharge conditions are 0.62 m^3/kg, 100 kPa, and 270 m/s. The total heat loss between the inlet and discharge is 9 kJ/kg of fluid. In flowing through this apparatus, determine the specific internal energy increase or decrease in kJ/kg.
44#6 in steady flow apparatus, 135 kJ of work is done by each kgm og fluid. the specific volume of the fluid, pressure and speed at the inlet are 0.37m^3/kgm,600kPa and 16m/s. the inlet is 32 m above the floor and the discharge pipe is at the floor level. the discharge conditions are 0.62 m^3kgm, 100 kPa and 270m/s. the total heat loss between the inlet and discharge is 9 KJ/kgm of fluid. in flowing through this apparatus, does the specific internal energy increase of decrease, and by how much?
A double acting compressor with a volume displacement of 0.432 m3/sec, delivers air at 725 KPa at a rate of 0.188 m3/sec. The inlet condition of air 100 KPa and 30 °C and the angular speed of the compressor is 200 RPM. For a compression and expansion processes given by PV1.3=C. Determine: a) The percent clearance of the compressor. b) The bore and stroke, in meters, assuming that the stroke is equal with the bore and the volume displacement of the crank end and head end are the same.
In a steady flow apparatus, 135 kJ of work is done by each kg of fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.37 m3/kg, 600 kPa, and 16 m/s. The inlet is 32 m above the floor, and the discharge pipe is at the floor level. The discharge conditions are 0.62 m3/kg, 100 kPa, and 270 m/s. The total heat loss between the inlet and discharge is 9 kJ/kg of fluid. In flowing through this apparatus, does the specific internal energy increase or decrease, and by how much?a) 30 kJ/kg c) 20 kJ/kgb) -30 kJ/kg d) -20 kJ/kg
In a steady flow apparatus, 135 kJ of work is done by each kg of fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.37 m3/kg, 600 kPa, and 16 m/s. The inlet is 32 m above the floor, and the discharge pipe is at the floor level. The discharge conditions are 0.62 m3/kg, 100 kPa, and 270 m/s. The total heat loss between the inlet and discharge is 9 kJ/kg of fluid. In flowing through this apparatus, does the specific internal energy increase or decrease, and by how much? (With drawing to fully understand the question)a) 30 kJ/kg c) 20 kJ/kgb) -30 kJ/kg d) -20 kJ/kg
A turbine operates under steady flow conditions, receiving steam at the following state: pressure 1200 KPa, temperature 1880°C, enthalpy 2785 KJ/kg, speed 33.3 m/s and elevation 3 m. The steam leaves the turbine at the following pressure 20 KPa, enthalpy 2512 KJ/kg, speed 100 m/s and elevation 0 m. Heat is lost to the surroundings at the rate of 0.29 KJ/s. If the rate of steam flow through the turbine is 0.42 kg/s. Find: A. Potential Energy 1, KJ/kg. B. Potential Energy 2 in KJ/kg. C. Kinetic Energy 1 in KJ/kg. D. Kinetic Energy 2 in KJ/kg. E. Heat Energy in KJ/kg. F. Power Output in KW.
In a steady flow apparatus, 135 KJ of work is done on each kg of fluid. The specific volume of the fluid, pressure and speed at the inlet are 0.37 m3/Kg, 600KPa, and 160 m/s. The inlet is 32 m below the floor, and the discharge pipe is at floor level. The discharge conditions are 0.62 m3/kg, 100KPag and 27 m/s. The total heat gained between the inlet and discharge is 9 KJ/Kg of fluid. In the flowing through this apparatus, by how much does the specific internal energy increase or decrease?
Helium expands polytropically steadily through a turbine according to the process pV1.5=C. The inlet temperature is 1000°K, inlet pressure 1000 kPa, and the exit pressure is 150 kPa. The turbine produces 100,000 kW. Determine (a) the exit temperature; (b) the mass flow rate kg/sec. RHe= 2.077 kJ/kg.K; k=1.666. Draw and label the P-V and T-S diagrams.
A turbine operates under steady flow conditions, receiving steam at the following state: pressure 1200kPa, temperature 188℃, enthalpy 2785 KJ/kg, speed=33.3m/s and elevation of 3m . The steam leaves the turbine at the following state; pressure=20kPa, enthalpy 2512 kJ/kg. Speed 100m/s and elevation 0 m. Heat is lost to the surroundings at the rate of 0.29 kJ/s. If the rate of steam flow through a turbine is 0.42 kg/s, what is the power output of the turbine in kW?
The static and stagnation pressures of a fluid in a pipe are measured by a piezometer and a pitot tube. The heights of the fluid in the piezometer and pitot tube are measured to be 2.2 m and 2.0 m, respectively. If the density of the fluid is 5000 kg/m3, the velocity of the fluid in the pipe is (a) 0.92 m/s (b) 1.43 m/s (c) 1.65 m/s (d ) 1.98 m/s (e) 2.39 m/s