9 Figure 30-29 shows three circuits with identical batteries, inductors, Figure 30-28 Question 8. and resistors. Rank the circuits, greatest first, according to the current through the resistor labeled R (a) long after the switch is closed, (b) just after the switch is reopened a long time later, and (c) long after it is reopened. R. (1) (2) (3) Figure 30-29 Question 9. elle ww elll elle

9 Figure 30-29 shows three circuits with identical batteries, inductors, Figure 30-28 Question 8. and resistors. Rank the circuits, greatest first, according to the current through the resistor labeled R (a) long after the switch is closed, (b) just after the switch is reopened a long time later, and (c) long after it is reopened. R. (1) (2) (3) Figure 30-29 Question 9. elle ww elll elle

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter32: Inductance

Section: Chapter Questions

Problem 32.8CQ: After the switch is dosed in the LC circuit shown in Figure CQ32.8, the charge on the capacitor is...

See similar textbooks

Similar questions

An RL circuit consists of a 40.0 (resistor and a 3.00 mH inductor. (a) Find its impedance Z at l60.0 Hz and 10.0 kHz. (b) Compare these values of Z with mouse found in Example 23.12 in which there was also a capacitor.
After the switch is dosed in the LC circuit shown in Figure CQ32.8, the charge on the capacitor is sometimes zero, but at such instants the current in the circuit is not zero. How is this behavior possible? Figure CQ32.8 Conceptual Question 8 and Problems 52, 54, and. 15.
An LC circuit consists of a 3.00 mH inductor and a 5.00 (F capacitor. (a) Find its impedance at 60.00 Hz and 10.0 kHz. (b) Compare these values of Z with those found in Example 23.12 in which there was also a resistor.
Two ideal inductors, L1 and L2, have zero internal resistance and are far apart, so their magnetic fields do not influence each other. (a) Assuming these inductors are connected in series, show that they are equivalent to a single ideal inductor having Leq = L1 + L2. (b) Assuming these same two inductors are connected in parallel, show that they are equivalent to a single ideal inductor having 1/Leq = 1/L1 + 1/L2. (c) What If? Now consider two inductors L1 and L2 that have nonzero internal resistances R1 and R2, respectively. Assume they are still far apart, so their mutual inductance is zero, and assume they are connected in series. Show that they are equivalent to a single inductor having Leq = L1 + L2 and Req = R1 + R2. (d) If these same inductors are now connected in parallel, is it necessarily true that they are equivalent to a single ideal inductor having 1/Leq = 1/L1 + 1/L2 and 1/Req = 1/R1 + 1/R2? Explain your answer.
EXAMPLE 30-8 Damped oscillations. At t = 0, a 40-mH inductor is placed in series with a resistance R = 3.00 Ω and a charged capacitor C = 4.8 μF. (a) Show that this circuit will oscillate. (b) Determine the frequency. (c) What is the time required for the charge amplitude to drop to half its starting value? (d) What value of R will make the circuit nonoscillating?
Help A V = 86-V source is connected in series with an R = 1.8-kΩ resistor and an L = 28-H inductor and the current is allowed to reach maximum. At time t = 0 a switch is thrown that disconnects the voltage source, but leaves the resistor and the inductor connected in their own circuit. After the current decreases to 53 % of its maximum value, the battery is reconnected into the circuit by reversing the switch. 1) At what value of the time t, in milliseconds, does the current reach 77 % of its maximum? 2) How much energy, in millijoules, is supplied in total by the battery, both in initially bringing the current to maximum and in bringing the current back to the 77 % level from 53 %? Ignore energy dissipated in the resistor during those processes.
When the current through a large inductor is interrupted with a switch, an arc appears across the open terminals of the switch. Explain.
An RL circuit is constructed using a (10.0+/-0.1) ohm resistor and a (8.1+/-0.1) mH inductor. The inductor has a resistance of RL = (5.2+/-0.1). This circuit is charged, and the values returned from the exponential fit are: A = -2.13, B=1930, and y0=2.57. a) Calculate the time constant (with uncertainity) from the values of R, RL & L. b) Determine the value of the time contant from the exponential fit. c) Determine if the time constants from Part A and Part B agree.
A 27.4 -mH inductor and 6.07 -Ω resistor, together with a switch,are connected in series to an ideal battery, forming a closed circuit whenthe switch is turned on. At time t = 0, the switch is turned on; the initialcurrent is zero. The time it takes for the current in the circuit to reach77.3 % of its maximum value is most nearly
In a practical electrical circuit, inductors are often coils of wire in the form of a solenoid. Consider a solenoid of length 2.0 cm consisting of 1000 turns of wire. Each turn is a circular loop with a radius of 0.50 cm. Calculate the value of L.
30.29 In Fig. 30.11, switch S1 is closed while switch S2 is kept open. The inductance is L = 0.380 H, the resistance is 48 Ohms, and the emf of the battery is 18 V. At time t after S1 is closed, the current in the circuit is increasing at a rate of di/dt = 7.2 A/s. At this instant, what is Vab, the voltage across the resistor?
The 5.00 A current through a 1.50 H inductor is dissipated by a 2.00 Ω resistor in a circuit like that in Figure 23.44 with the switch in position 2. (a) What is the initial energy in the inductor? (b) How long will it take the current to decline to 5.00% of its initial value?