A 0.8-H inductor is connected in series with a 7-ohm resistor. If the connection is energized from a 10-V DC source, determine the voltage (in volts) across the inductor at t = 2.5 ms. The initial current is 150 mA. (Answer in four decimal places.)

A 0.8-H inductor is connected in series with a 7-ohm resistor. If the connection is energized from a 10-V DC source, determine the voltage (in volts) across the inductor at t = 2.5 ms. The initial current is 150 mA. (Answer in four decimal places.)

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter32: Inductance

Section: Chapter Questions

Problem 32.16P

See similar textbooks

Related questions

Q: A 20.69 mH inductor and a 250 micro-F capacitor are connected in series with an AC source. If the…

A: The inductive reactance is equal to the capacitive reactance at resonance frequency f=12πLC

Q: A 0.7-H inductor is connected in series with a 9-ohm resistor. If the connection is energized from…

A: The inductance of the inductor L=0.7 H The resistance in the circuit R=9 Ω The time t=2.75…

Q: A coil of inductance 88 mH and unknown resistance and a 0.94 mF capacitor are connected in series…

A: The capacitance,

Q: A capacitor with a capacitance 5.00 × 10-5 F is charged by connecting it to a 12.0 V battery. The…

A: Given:Max charge on capacitor, Qo = 6.00×10−4 Cangular frequency, ω = 120 rad/sMax voltage on the…

Q: A series circuit has a capacitor of 0.2 · 10-6 F and an inductor of 0.8 H. If the initial charge on…

Q: It is decided to configure a series circuit with a 20 V source, a 2 kΩ resistor, and a 2.50 H…

A: V= 20v, R= 2kohm , L= 2.5H

Q: Following graph is obtained when AC passes through Voltage Current 7/2 3n/2 wt O a. resistor and…

Q: An LC circuit with a 3.0 µF capacitor and a 3.0 H inductor has a current Ne) = 10.0 sin(2.00)…

Q: A 6.0-uF capacitor, a 0.12-H inductor, and an 85-Ω resistor are connected in series across a 10-V,…

Q: An inductor of length 10 cm has 1000 turns is connected in series with 16 V battery. The current of…

A: Given: The length (l) of the inductor is 10 cm. The number of turns (N) in the inductor is 1000. The…

Q: An ideal transformer is connected to Vi=220 Volts AC source and also supplies V2=11 Volts on a…

A: Given For ideal transformer, V1 = 220 Volts ( source voltage) V2 = 11 Volts ( device voltage)…

Q: A 3-H inductor is connected in series with an AC voltage supply (rms voltage 120 v, frequency f = 60…

Q: The inductive reactance offered by a inductor at 50 Hz is 5 2.lf frequency is increased to 100 Hz,…

A: Inductive reactance is the resistance offered by inductor. XL (Inductive reactance) = ωL ω =…

Q: An inductor with an inductance of 5.75 H and a resistance of 9.00 2 is connected to the terminals of…

A: Given The inductance of the inductor is L = 5.75 H. The value of resistance is R = 9 Ω. The voltage…

Q: A 50.0ohm resistor is connected to an ac generator with e= 30.0 V.What is the amplitude of the…

Q: Since inductors can be used as energy storage elements, how much inductance is needed to power up a…

Q: When a voltage V is applied to a series circuit consisting of a resistor R and an inductor L, the…

Q: The time for the current in the resistor of an RL circuit, in units of ms, to reach -63% of its…

A: Given:- The resistance R = 513 ohm The inductor L = 87.3 mH Find:- The time for the current in…

Q: Each of the transformers shown here has its primary connected to a 120 V AC power supply and its…

A: Given: The primary voltage is Vp=120 V. The secondary load resistance is R=1000 Ω. The expression…

Q: The circuit shown below is powered by an AC source of AVme = 11.0 V at a frequency of 60.0 Hz and…

A: ∆Vrms=11.0 Vf=60 HzIO=187 mAIa=290 mAIb=137 mA

Q: An inductor has an inductance of 0.080 H. The voltage across this inductor is 55 V and has a…

A: Given The inductance of the inductor is L = 0.080 H. The voltage across the inductor is V = 55 V.…

Q: For the items 26 and 27, consider the following sinusoidal plot of the instantaneous voltage of an…

A: An electrical circuit that consists of a series connection of an inductor (L), a capacitor (C), and…

Q: An AC voltage source is connected to an inductor with inductance 0.056 H. The voltage source…

A: Part a solution:

Q: A coil of wire with a resistance of 0.15 Ω has a self-inductance of 0.083 H. If a 5.0-V battery is…

Q: An inductor is connected to an ideal ac power supply. The phase angle between the current and…

A: For a pure Inductive circuit: The phase angle of an inductor's resistance to current is 90°,…

Q: A 12.0-V battery is connected in series to a 25.0-Ohm resistor and a 5.00-H inductor. How much…

Q: At what frequency would the reactance of a 10 -µF capacitor equal the reactance of a 1.0-µF…

A: Given, capacitor of capacitance, C = 10 μFInductance of the inductor, L = 1.0 μH

Q: 440 Vac 400 Hz generator is connected to a series circuit with a 16 Ω resistor, a 11.9-mH inductor,…

A: 440 Vac 400 Hz generator is connected to a series circuit with a 16 Ω resistor, a 11.9-mH inductor,…

Q: For the same RLC series circuit having a 40.0 Ω resistor, a 3.00 mH inductor, a 5.00 μF capacitor,…

A: Resistance, R = 40 Ω Inductor, L= 3 mH capacitor, C = 5 μF Vrms = 120 V frequency, f = 50 Hz

Q: The inductive reactance offered by a inductor at 50 Hz is 5 Q .If frequency is increased to 100 Hz,…

A: Given : Reactance of an inductor, XL = 5Ω Frequency, f = 50 Hz If the frequency is…

Q: A 5 kVA single-phase transformer shown in the Figure Q3(a) is connected to a 2.5 kV supply. The…

Q: A 5.40 µF capacitor and a 3.80 mH inductor are connected in series with an AC power source that has…

Q: An AC circuit with a 20 ohm resistor, a capacitor with a capacitance of 15 ohms, and an inductor…

Q: The inductive reactance of a 20.0-mH inductor at a certain frequency is 120 Ω. What is the frequency…

A: The inductive reactance is a function of frequency. Depending on the frequency, inductive reactance…

Q: What relationship exists between a coil's inductance value and the amount of emf or voltage it…

Q: which is an invalid statement a. AC source is replaced by a constant DC source, after a very long…

A: Given that:- R-L-C series circuit is given

Q: Consider the circuit shown in the figure. If the peak voltage of the AC source is VAC max = 100 V,…

A: Given:- vAC max = 100 v N1 = 80 turns N2 =120 turns R = 40 ohm

Q: A 35 mH inductor is connected in parallel to an AC power supply with a voltage given by,…

A: Reading by ammeter = rms value of current

Q: A 2H inductor is in series with two 4H inductors that are in parallel with each other. The effective…

A: Answer A: 4H For inductance Circuit in parallel LP=L1L2L1+L2 Circuit in series LS=L1+L2

Question

100%

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

When a camera uses a flash, a fully charged capacitor discharges through an inductor. In what time must the 0.100-A current through a 2.00-mH inductor be switched on or off to induce a 500-V emf?
A 40-mH inductor is connected to a 60-Hz AC source whose voltage amplitude is 50 V. If an AC voltmeter is placed across the inductor, what does it read?
An inductor of inductance 6.0H and resistance 640 ohms is connected in series to two resistors which are parallel and the whole arrangement is connected to an A.C source of 200V and 50Hz. If the current through the circuit is 100mA and the resistance of one of the resistors is 20 ohms, what is the resistance of the other resistor?
It is decided to configure a series circuit with a 20 V source, a 2 kΩ resistor, and a 2.50 H inductor. How long does it take for the current to reach half its final value?
A 20x10-6 F capacitor is charged by a 100 V power supply, then disconnected from the power and connected in a series with 0.123mH inductor. What is the magnitude of the current at t= 3.45ms?
An inductor with inductance 10.23 H and a resistor with resistance 3.24 ohms are connected in series to a battery with emf of 2V. At what time (s) is the current flowing in the circuit equal to 50% of the final steady state current ( I= Emf/R)?
A capacitor is using 1.6 kVARs and has a capacitive resistance of 24 ohms. How much current is flowing through the inductor?
2. A 0.7-H inductor is connected in series with a 9-ohm resistor. If the connection is energized from an 11-V DC source, determine the voltage (in volts) across the resistor at t = 2.75 ms. The initial current is 175 mA. Express your accurate answer to four decimal places.
An inductor is connected to an AC source. If the inductance of the inductor is 0.428 H and the output voltage of the source is given by Δv = (120 V)sin[(29.0? s−1)t], determine the following
Consider a 23 mH inductor that has a resistance of 4.15 Ω. Time constant is 0.00554. If the inductor is connected to a 12.0 V battery, what is the current, I, in amperes, after 12.5 ms?
A0.2 H inductor and a 146 Ohm resistor are connected to a 12 V battery. After how much time will the current reach 84% of its final value?
LRC circuit is made from a 225.57 Ohm resistor, an 17.75 mH inductor, and a 0.39 micro Farad capacitor. The source of alternating current has maximum voltage 58.84 V and operating at frequency of 5532.14 Hz. Find the maximum current.