A 150 mm long with 12.5 mm in diameter of a stainless steel rod is being reduced in diameter to 12.0 mm using a lathe machine. The machine spindle rotates at 400 rpm, and tool is traveling at an axial speed of 200 mm/min. Calculate: (i) Material removal rate

A 150 mm long with 12.5 mm in diameter of a stainless steel rod is being reduced in diameter to 12.0 mm using a lathe machine. The machine spindle rotates at 400 rpm, and tool is traveling at an axial speed of 200 mm/min. Calculate: (i) Material removal rate

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Explain the difference between gear hobbing and gear shaping with reference to various relative…

A: Soln:- Gear shapping :- 1.the gear shapping tooth is cut one by one till the completion of process.…

Q: Calculate the r/min required for finish turning

Q: A 1 mm thick cylindrical tube, 100 mm in diameter, is orthogonally turned such that the entire wall…

A: To find: The power required to carry out the operation . Given : The thickness of tube is t=1 mm.…

Q: A 78 mm thick plate is to be milled down to a thickness of 60 mm using an 80 mm face milling cutter.…

A: The processing time required is 30.61625 min.

Q: The outside diameter of a cylinder made of steel is to be turned. The starting diameter is 120 mm…

A: we know that, Taylor’s tool life equation is given by, VTn = C where, V= Cutting speed (m/min) T=…

Q: For a turning operation using a ceramic cutting tool, if the speed is increased by 50%, by what…

A: Tool life is the time duration during which a tool can perform its action without any kind of…

Q: e cutting process and calculate shear angle (Ø), friction coefficient and tangential force ,cutting…

A: Given: Cutting Force Fc = 80 KN Resultant of forces R = 100 KN Friction Force F = 75 KN Rake angle…

Q: If expanded honeycomb panels were to be machined in a form-milling operation, what precautions would…

A: Honeycomb Structure In composite manufacturing, the honeycomb structure is formed by joining the…

Q: a) Define specific energy for plane strain machining (cutting). b) In plane-strain orthogonal…

Q: able indicating at least 3 characteristics that distinguish volumetric deformation processes from…

A: Difference between bulk deformation and sheet metal deformation is given below

Q: Explain with the help of neat sketches.

A: Both caulking and fullering are the Operations used to make leak proof joint but they have some…

Q: What is the manufacturing process of lathe bed? Which material will be suitable for the product?

A: lathe is a machine which can perform various machining process like turning, boring, threading etc.…

Q: In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and the tangential…

A: The assumptions of the Merchant's Circle diagram are: 1. The blade of the cutting instrument must be…

Q: 11. Estimate the machining time required to rough turn a 0.5 m long annealed copper alloy Round bar…

Q: 12. A 600 mm × 30 mm flat surface of a plate is to be finish machined on a shaper. The plate has…

A: …

Q: A slab-milling operation is carried out on a 200 mm long, 80-mm-wide annealed mild-steel workpiece…

A: Given, Length of the workpiece, L=200 mm Width of the workpiece, W=80 mm Feed per tooth, ft =0.1…

Q: Explain why the mechanical properties of workpiece materials are not significant in most of the…

A: In the non-traditional machining process, tool and the workpiece are not connected directly to each…

Q: Calculate the bite angle when rolling plates 12 mm thick using work rolls 600 mm diameter and…

A: Given:∆h, Thickness reducing=3 mmR, radius of roller=300 mm

Q: For the following application, identify one or more nontraditional machining processes that might be…

A: Laser–Beam Machining (LBM):-It is a thermal material-removal process that utilizes a…

Q: Assume if a turning machine was producing 50 pieces an hour and the same turning machine, by the…

A: Given data: The initial production, P1=50. The final production, P2=100. Calculate the percent…

Q: A 6.5 inch long, 0.5 inch diameter stainless steel rod is being reduced to 0.480 inches by turning…

Q: What is K-factor in sheet metal operation? Mention its value.

Q: During a certain machining experiment at the UCSI workshop, it is observed that temperature at the…

Q: For the following application, identify one or more nontraditional machining processes that might be…

A: Nontraditional machining process: A machining process which includes various operation is performed…

Q: A 125mm-diameter work-bar, 1200mm long is held between centers of an engine lathe. A 400mm portion…

Q: A job has to be machined in shaping and the process parameters are given below: Length of the…

A: Given that A job has to be machined in shaping and the process parameters are given below: Length…

Q: Calculate the machining time intervals for face milling a cutter 10 inches long, 2 inches wide, with…

A: given; length(L)=10inch =0.254m

Q: Read the description of the operations required to make a part, and considering the production rate,…

A: Given: operations required and production rate To find: Select machine

Q: Describe the principles from power input of the shaping machine to the output of the tool

A: The shaper machine or shaping machine is that variety of metal cutting tool which is used to remove…

Q: Calculate the bite angle when rolling plates 12mm thick using work rolls 600mm diameter and reducing…

A: Given data: hi=12 mm∆h=3 mmD=600 mm Need to determine the bite angle.

Q: What is the effect of feed on surface finish for Shaper Machine? Explain the working of Shaper with…

A: In the shaper machine, the feed is provided to the workpiece in the lateral direction, and the feed…

Q: Explain the distinct features of non-conventional machining which gave it superiority over the…

A: Solution:

Q: A 150 mm long with 12.5 mm in diameter of a stainless steel rod is being reduced in diameter to 12.0…

A: cutting speed = 0.261799 m/sec material removal rate = 32.7249 cmm/rev cutting time = 0.75 min

Q: A shaft of 0.5 m in length and 100cm in diameter is to be machined. What operation will you utilize…

A: Given Data⇒ Length of shaft (L1) =0.5 m Diameter (D1)=100 cm Final Dimensions Length of…

Q: Define specific energy for plane strain machining (cutting). In plane-strain machining, the two main…

Q: would it be difficult to use the machining processes that you have learnt in this course on…

A: Machinability refers to how easily a metal may be cut (machined), allowing the material to be…

Q: What is the manufacturing process of lathe bed? Which material will be suitable for the product?…

A: manufacturing Process of lathe bed ? And it's material ? A lathe machine is used in manufacturing…

Q: a rod is to be manufactured using turning operations and is made of Nickel alloy. The rod is 80 mm…

A: Given data Rod length = l = 80 mm Initial Diameter = 15 mm Final Diameter = 10 mm N = 500 rpm Tool…

Q: What is a Turning Machine?

A: Turning: It is a material removal process with the help of single point cutting tool. In this…

Q: Calculate the fatigue clearance for an operation in which the operator loads and unloads a 25-pound…

Concept explainers

Rapid Prototyping

The word rapid prototype contains two words- rapid and prototype. The word rapid represents fast, and prototype represents a real, dimensionally accurate, and working assembly of a new or existing product.Rapid prototyping is described as a layer-by-layer manufacturing process in which different machine components like computer control, optical sensor, photosensitive sensor, deposition material, and others are used to develop an accurate dimensional physical working model.In other words, rapid prototyping is a layered manufacturing process of a product using a 3-dimensional (3D) computer-aided design model.

Question

manufacturing technology

please answer as soon as possible

A 150 mm long with 12.5 mm in diameter of a stainless steel rod is being
reduced in diameter to 12.0 mm using a lathe machine. The machine spindle
rotates at 400 rpm, and tool is traveling at an axial speed of 200 mm/min.
(c)
Calculate:
(i)
Material removal rate
(ii)
Cutting time.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A 78 mm thick plate is to be milled down to a thickness of 60 mm using an 80 mm face milling cutter. Calculate the processing time if the cutting depth is 6 mm, the feed/rev is 1.1 mm and the cutting speed is 15 m/min, and if the over run for a 620 mm long plate is 10 mm.
a rod is to be manufactured using turning operations and is made of Nickel alloy. The rod is 80 mm in length and 15 mm in diameter. The final required diameter is 10 mm and the spindle rotates at N = 500 rpm while the tool axial speed is 100 mm/ min. Calculate material removal rate, cutting speed, cutting time, the power dissipated, and cutting force.
Calculate the spindle speed for a Lathe Machine, if the cutting speed for a mild steel material workpiece is 34 m/min and the diameter of the cylindrical workpiece is 46 mm.
A motorised metal guillotine machine is required to cut 45 mm diameter hole in a plate of 20 mm thickness at rate of 35 holes per minute. It requires a torque of 7 Nm for an area of hole in mm2. If the cutting takes 1/10 of a second and the speed of its flywheel varies from 165 rpm to 145 rpm, calculate:
A student is using a lathe with 80-hp and 80% efficiency to fabricate a copper alloy with Sy= 1200 ksi. If the width of cut is 0.30 in. and the student set a rake angle of 0° and a cutting speed of 200 ft/ min while she assumed a coefficient of friction to be 0.5. What is the maximum depth of cut the student can achieve?
A student is using a lathe with 80-hp and 80% efficiency to fabricate a copper alloy with Sy = 1200ksi If the width of cut is 0.30 inand the student set a rake angle of 0and a cutting speed of 200fl / min while she assumed a coefficient of friction to be 0.5. What is the maximum depth of cut the student can achieve?
A mild steel block of width 40 mm is being milled using a straight slab cutter 70 mm diameter with 30 teeth. If the cutter rotates at 40 rpm, and depth of cut is 2 mm, what is the value of maximum uncut chip thickness when the table feed is 20 mm/min?
A 6.5 inch long, 0.5 inch diameter stainless steel rod is being reduced to 0.480 inches by turning on a lathe. The spindle rotates at 400 RPM and the tool is travelling at an axial speed of 8 inches/min. Calculate the cutting speed, feed, time, and material removal rate required.
A slab-milling operation is carried out on a 200 mm long, 80-mm-wide annealed mild-steel workpiece having a feedrate of 0.1 mm/tooth and a depth of cut of 4.0 mm. The cutter of 50 mm diameter has 18 straight teeth and rotates at 135 rpm. The given specific energy for this material is 3.5 W s/mm3 and the slab mill is wider than the workpiece to be machined. Calculate:‧ the material-removal rate;‧ the power and torque required for this operation;‧ the cutting time. (243 mm/min, 77760 mm3/min, 4.5 kW, 52.8 s)
What is difference in turning and boring processes? Explain the difference if any in the equations for cutting speed, material removal rate, and machining time
Assuming that the coefficient of friction is 0.25, calculate the maximum depth of cut forturning a hard aluminium alloy on a 15-kW lathe (with a mechanical efficieny of 80%) at awidth of cut of 6 mm, rake angle of 0˚, and a cutting speed of 90 m/min, shear strength of 150 MPa.
Note: Read the question carefully and give me right solutions according to the question. In orthogonal cutting of steel tube of 150 mm diameter and 2 mm thick, the cutting force was 130 kg and feed force was 35 kg for chip thickness of 0.3mm. The orthogonal cut was taken at 60 meter per minute with a feed of 0.14 mm/rev. If the back rack angle of the cutting tool was - 8 o (minus 8 degree), then calculate the shear strain and strain energy per unit volume.