A 3-m-long (in the direction perpendicular to the paper) curved gate is located in the side of a reservoir. The gate forms a quarter of a circle whose radius is 2 m. Determine the magnitude of the horizontal and vertical components of the force that is required to hold the gate in place (ignore the self weight of the gate).

A 3-m-long (in the direction perpendicular to the paper) curved gate is located in the side of a reservoir. The gate forms a quarter of a circle whose radius is 2 m. Determine the magnitude of the horizontal and vertical components of the force that is required to hold the gate in place (ignore the self weight of the gate).

Name: 5. A 3-m-long (in the direction perpendicular to the paper) curved ga
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 5. A 3-m-long (in the direction perpendicular to the paper) curved gate is located in the sideof a reservoir. The gate forms a quarter of a circle whose radius is 2 m. Determine themagnitude of the horizontal and vertical components of the force tha

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
Calculate the resultant force caused by the water acting on the parabolic arch dam. The water levels are 16 ft on the upstream side and zero on the downstream side. For water, use =62.4lb/ft3.
An open tank 2 m x 4 m rectangular horizontal section has anegligible weight and contains water to a depth of 1.5 m. It is actedupon by an unbalanced force of 50 kN parallel to longer side so thatwater is about to spill. If the tank is closed and theacceleration is increased by 4 m/s ², determine the new unbalancedforce if the pressure on the surface is 30 kPa.
The 5 m high and 6 m wide rectangular cover is hinged from point A on its upper edge and is prevented from opening with a fixed wedge at point B. Determine the hydrostatic force and center of pressure exerted on the cover by the 8 m high water. (ρ(water)=1000 kg/m^3 , g= 9.81 m/s^2)
6-m-wide rectangular gate shown is hinged at B and leans against the floor at A making an angle of 45° with the horizontal The gate is to be opened from its lower edge by applying a normal force at its center. Determine the minimum force F required to open the water gate.
A long solid cylinder of radius 0.8 m hinged at point A is used as an automatic gate, When the water level reaches 5 m, the gate opens by turning about the hinge at point A. Determine (a) the hydrostatic force acting on the cylinder and its line of action when the gate opens and (b) the weight of the cylinder per m length of the cylinder.
The vertical side of reservoir has a rectangular opening 2.75 m long and 1.2 m high. It is closed by a plate using 4 bolts placed at the corners of the opening. What would be the tension in the bolts if water stands to height of 1.8 m above the top edge of the opening which horizontal ?
Find a) the total force on gate AB in KN and b) the position of the center of pressure in m with respect to the bottom of the pond. Assume that the gate is 8 feet wide, that 1ft = 0.3048m, and that 1PSI = 6897.1 Pa
The water in a 25-m-deep reservoir is kept inside by a 90-m-wide wall whose cross section is an equilateral triangle. Determine (a) the total force (hydrostatic + atmospheric) acting on the inner surface of the wall and its line of action and (b) the magnitude of the horizontal component of this force. Take Patm = 100 kPa.
A circular plate of diameter 3 m is immersed in water in such a way that its least and greatest depth from the free surface of water are 1 m and 3 m respectively. For the front side of the plate, find (i) total force exerted by water and (ii) the position of centre of pressure.
The 100cm radius cylinder weighs 3.1 KN and rest on the bottom of a container which is 1.5 meter long. Oil and water are poured into the left and right portion of the container to the depth of 0.8m and 1.4m respectively. Find the magnitude of the horizontal and vertical components of the force which will keep the cylinder touching the container at B.