A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500 V (r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the rotor winding is 0.2 Q and its inductance is 0.04 H. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume the flux to remain constant.

A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500 V (r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the rotor winding is 0.2 Q and its inductance is 0.04 H. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume the flux to remain constant.

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter35: Harmonics 916

Section: Chapter Questions

Problem 3RQ: Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction...

See similar textbooks

Similar questions

Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction motor? Explain your answer.
A 3-phase, 6 pole, 440 V, 60 Hz, Y-connected induction motor has the following impedances per phase referred to the stator circuit: R1=0.43 Ω, R2=0.54 Ω, X1=1.263 Ω, X2=0.608 Ω, XM=43Ω The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2 percent at the rated voltage and rated frequency, Find the motor speed, stator current, output power
A 200V, 3, star connected induction motor takes 30A at a line voltage of 35V with rotor locked. With this line voltage, power input to motor is 450W and core loss is 60W.The dc resistance between a pair of stator terminals is 0.15Ω. If the ratio of ac to dc resistance is 1.6, find the equivalent leakage reactance/phase of the motor and the stator and rotor resistance per phase.
The stator resistance of a 1-phase induction motor is 2.5 ohm and its leakage reactance is 2.0 ohm. Onno-load, the motor takes 4 A at 96 V and at 0.25 lagging power factor. The no-load friction andwindage loss is negligible. Under the blocked-rotor condition, the input power is 130 W at 6 A and42 V. obtain the equivalent circuit parameters.
The stator resistance of a 1-phase induction motor is 2.5 ohms and its leakage reactance is 2.0 ohms. Onno-load, the motor takes 4 A at 96 V and at 0.25 lagging power factor. The no-load friction andwindage loss is negligible. Under the blocked-rotor condition, the input power is 130 W at 6 A and42 V. Obtain the equivalent circuit parameters.
a)the figure below shows the per-phase equivalent circuit of a two - pole three- phase induction motor operating at 50 Hz . The voltage (E1) across the magnetizing inductance is 210 v , and the slip (s) is 0.05 . What is the developed torque produced by the motor ? b) A 4 poles , 50Hz , Y-connected three phase induction motor has the per phase equivalent circuit parameters of (R1 =R2=0.12 , X1=X2=0.6 , Xm =12 ) ohm and I2 =20 (0 . Use exact equivalent circuit to determine the following at rated slip of 0.03 : I. Stator current II. Magnetizing current III. Power factor IV. Developed torque C) What is the physical meaning for each of the following induction motor parameters : R1 , R2 , Rc , X1 , X2 , Xm d) What is synchronous watt
TOPIC: AC Machines - Induction Motor A three-phase, 3 KV, P=24, 50Hz, Y-connected slip ring IM has a rotor resistance of 0.015 ohm and a stand still reactance of 0.265 ohm per phase. Full load torque Is obtained al a speed of 245 rpm. Neglect stator impedance, Calculate (A) Ratio of Maximum Torque to Full load Torque (B) Speed at Maximum Torque
15. The main and auxiliary windings of a hypothetical 130-V, 60-Hz, split-phase motor have the following locked-rotor parameters: Rmw = 2.3 Ohms, Xmw = 3.0 Ohms, Raw = 9.25 Ohms, and Xaw = 8.2 Ohms. The motor is connected to a 130-V, 50-Hz system. Determine the capacitance, in microfarad, required in series with the auxiliary winding in order to obtain a 86 degrees phase displacement between the currents in the two windings. Correct Answer: 222.33
A 480V, 60Hz, six-pole, Y connected cage rotor induction motor has the followingparameters in ohms per phase referred to the stator: R1=0.5Ω X1=1.1Ω R2=0.45ΩX2=0.6Ω Xm=30Ω The total rotational losses (friction, windage, and core losses) are 1100W and are assumedto be constant. For a rotor slip of 2.2% at the rated voltage and rated frequency, calculate:a) Rotor speedb) Stator currentc) Complex, real, and reactive input power and the power factor of the machined) The air-gap power (Pag) and the developed mechanical power (Pconv)e) Developed electromechanical torque, and the output mechanical torquef) Efficiency
A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following standstill impedances:Main winding: Zm =5+j6.25Auxiliary winding: Za =8+j6a) Determine the value of capacitance to be added in series with the auxiliary winding to obtainmaximum starting torque.b) Compare the starting torques and starting current with and without the added capacitance in theauxiliary winding circuit when operated from a 120V, 60Hz supply
A star-connected induction motor 3-phase, has the following equivalentcircuit parameters per phase:and R1 = R2 =0.8ohm; x1 = x'2 = 3.5ohmand 200-hp, 3300-V, Calculate the slip at full load if the friction andwindage loss is 3 kW. How much extra rotor resistance would be necessaryto increase the slip to three times this value with the full-load torquemaintained? How much extra stator resistance would be necessary toachieve the same object and what loss of peak torque would result?
A 440-V, 60-Hz, 2-pole, Y-connected, three-phase induction motor has the following parameters in ohms/phase: R1 = 0.3, X1 = 0.9, R2 = 0.6, X2 = 0.9, Rc = 150, Xm = 60. If the rotational loss is 4% of the powerdeveloped, determine the efficiency of the motor when it runs at 4% slip.