A 300mm x 500mm rectangular concrete beam is reinforced with four pieces 25mm diameter bars. The beam is simply supported on a span of unknown length. The uniform linear dead load from the slab is 18kN/m (weight of beam not included) and the uniform linear live load is 10KN/m. The effective depth of the beam is 430mm. Using your own values of fc' = 21.1 MPa and fy = 345 MPa from the excel file, determine the safe length of the beam. Use area of one 25mm diameter bar = 510mm2.

A 300mm x 500mm rectangular concrete beam is reinforced with four pieces 25mm diameter bars. The beam is simply supported on a span of unknown length. The uniform linear dead load from the slab is 18kN/m (weight of beam not included) and the uniform linear live load is 10KN/m. The effective depth of the beam is 430mm. Using your own values of fc' = 21.1 MPa and fy = 345 MPa from the excel file, determine the safe length of the beam. Use area of one 25mm diameter bar = 510mm2.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular beam of length 702mm has a width of 132mm and a depth of301mm. Compression steel bars are placed at a distance 98 mm from the extreme concrete compressivefiber. The beam supports service dead loads of dead load (16 KN/m) and live load (24 KN/m). Reinforced with 4 25mm tension steel bars and 4 12mm tension steel bars f′c = 42 MPafy = 519 MPa 1. Solve for the height of the neutral axis measured from the extreme compression fiber.2. Solve for the design moment.3. Solve for the strength reduction factor.
A rectangular reinforced concrete beam with width of 350 mm and effective depth of 600 mm is subjected to 250 Kn.m bending moment. the beam is reinforced with 6-25 mm bars. Use alternate design method and modular ratio, n = 10. a. find the location of the neutral axis from the bottom of the beam & moment of Inertia. b. Find the maximum stress of concrete and steel c. total compression force in concrete?
Determine the prestressing force required for the precast concrete T-beam. Use the following data: Total moment = 250 kN-m Effective stress fse= 862 MPa Allowable concrete stress = f =11 MPa Consider zero stress at the bottom of the beam I=3673x106 mm A=103125 mm2 Eccentricity = 271.6 mm Centroid of steel is located at 100 mm from the bottom of the beam.
A simply supported rectangular beam of length 6.45m has a width of 437.5 and an effective depth of 692.5. The beam is to be reinforced using 12 mm bars. The beam supports service dead loads of 31 kN/m and 39.5kN/m., respectively. the fc' is 28MPa, fy is 420MPa and Wu is 89.9kN/m. 1. what is the ultimate moment capacity of the beam? 2. what is the height of the equivalent stress block? 3. Determine the number of bars required for this beam
2. A reinforced concrete beam having a width of 280 mm and a total depth of 600 mm isreinforced for tension at the bottom with 6 - 36 mmɸ bars placed on two layers, 4 bars onfirst layer and 2 bars on second layer. Compute the effective depth of the beam and theclear horizontal spacing between bars.
A simply supported wood beam that is 4.2 m long carries a 49 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 130 mm, d = 420 mm, a = 65 mm, and c = 40 mm. Section a–a is located at x = 0.7 m from B.(a) At section a–a, determine the magnitude of the shear stress in the beam at point H.(b) At section a–a, determine the magnitude of the shear stress in the beam at point K.(c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span.(d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length.
A simply supported wood beam that is 4.2 m long carries a 49 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 130 mm, d = 420 mm, a = 65 mm, and c = 40 mm. Section a – a is located at x = 0.7 m from B. (a) At section a – a, determine the magnitude of the shear stress in the beam at point H. (b) At section a – a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length
A prismatic beam having 250 mm x 500 m is reinforced for flexure at the bottom with 4-416 mm with an effective depth of 420 m. It is simply supported over a span of 6 m and designed to support uniformly distributed load over the entire span. Concrete weighs 24 kn/m3, Concrete strength f'c= 24 MPa and rebar strength fy=280 MPa. 1. Determine the resulting depth of the uniform rectangular stress block in a when the bean section reaches tlimate stage. (A to D) 2. Determine the nomina moment strength in kN/m of the beam section as per NSCP 2015. ( E to H) 3. Determine the factored uniform load in kN/m the beam can sustain in addition to its factored self weight. (I to L) A 44.15 B. 78 85 c. 57.34 D, 98.56 E. 195.66 F. 89.60 G.133.91 H. 110.15 I 16.31 J. 39.16 K. 26.16 L. 20.51
A simply supported wood beam that is 4.2 m long carries a 38 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 160 mm, d = 350 mm, a = 105 mm, and c = 15 mm. Section a–a is located at x = 0.7 m from B.(a) At section a–a, determine the magnitude of the shear stress in the beam at point H.(b) At section a–a, determine the magnitude of the shear stress in the beam at point K.(c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span.(d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. Draw a horizontal line through point H. Use the area above this line to calculate the first moment of area associated with point H.Answer:QH = mm3
A wooden beam 150mm wide by 300mm deep is loaded as shown. If the maximhm flexural stress is 8MN/m^2. Find the maximum values of1.)W(kN/m)2.) P (kN)
A simply supported wood beam that is 12.9 m long carries a 30 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 150 mm, d = 380 mm, a = 100 mm, and c = 35 mm. Section a–a is located at x = 2.2 m from B. (a) At section a–a, determine the magnitude of the shear stress in the beam at point H. (b) At section a–a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length.
A prismatic beam having 250 mm x 500 mm is reinforced for flexure at the bottom with 4-ϕ16 mm with an effective depth of 420 mm. It is simply supported over a span of 6 m and designed to support uniformly distributed load over the entire span. Concrete weighs 24 kN/m3, Concrete strength f’c = 24 MPa and rebar strength fy = 280 MPa. Determine the resulting depth of the uniform rectangular stress block in mm when the beam section reaches utlimate stage. (A to D) Determine the nomina moment strength in kN/m of the beam section as per NSCP 2015. (E to H) Determine the factored uniform load in kN/m the beam can sustain in addition to its factored self weight. (I to L) A. 44.15 B. 78.85 C. 57.34 D. 98.56 E. 195.66 F. 89.60 G. 133.91 H. 110.15 I. 16.31 J. 39.16 K. 26.16 L. 20.51