A 5-mm thick mild steel plate is used to form a hollow column of 60 mm outside diameter. The column length is 1.2 m. Calculate the crippling load using Johnson’s Parabolic formula. Take modulus of elasticity and yield strength as 206 GPa and 330 MPa, respectively. Assume one end is hinged and the other end fixed. 218212 N 176745 N 930094 N 263252 N

A 5-mm thick mild steel plate is used to form a hollow column of 60 mm outside diameter. The column length is 1.2 m. Calculate the crippling load using Johnson’s Parabolic formula. Take modulus of elasticity and yield strength as 206 GPa and 330 MPa, respectively. Assume one end is hinged and the other end fixed. 218212 N 176745 N 930094 N 263252 N

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.3.16P: .16 Three identical, solid circular rods, each of radius r and length L, are placed together to form...

See similar textbooks

Similar questions

A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
.16 Three identical, solid circular rods, each of radius r and length L, are placed together to form a compression member (see the cross section shown in the figure). Assuming pinned-end conditions, determine the critical load Pcr The rods act independently as individual columns. The rods are bonded by epoxy throughout their lengths so that they function as a single member. What is the effect on the critical load when the rods act as a single member?
Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of E = 29,000 ksi. Point load P = 5 kips is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B?
A 5 ft column is made from 2024-T4 Aluminum. Column has a square cross section of 2 in x 2 in. Both ends of the column are pinned. Calculate the critical load (Pcr). Note: I am having trouble understanding what the Module of Elasticity is for 2024-T4 Aluminum.
A hallow cylindrical steel column with an outer diameter of 200 mm and an inner diameter of 180 mm is subjected to a compressive load of 200 kN. The yield strength of the steel is 250 MPa. Calculate the factor of safety for the column using the maximum normal stress theory.
An axial load of 100 kN is applied to a flat bar 20 mm thick, tapering in width from 120 mm to 40 mm in a length 0f 10 m. Assuming E=200 GPa, determine the total elongation of the bar.
1. A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends being firmly fastened together, subjected to a compressive load of 30kN. Youngs modulus of elasticity of steel is 200GPa and that of copper is 120GPa. Evaluate the stress produced in the copper rod and steel tube.
A load is applied to a rigid bar that is symmetrically supported by three steel rods, as shown. The cross-sectional area of each of the rods is 1.2 in2. Calculate the maximum load P that may be applied (a) using an elastic approach with an allowable stress of 22,000 psi and (b) using an ultimate strength approach (inelastic) with a factor of safety of 1.85. Assume a ductile material with a yield stress of 36,000 psi.
To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of 0.32 m will be used. It is required that the tension in the bar does not exceed 240 MPa and the maximum elongation is 0.42 mm. What is the minimum rod diameter [m] in these conditions? (Elasticity for metallic bar take the module as 220 GPa).
To use deformation compatibility equations to calculate loads and deflections for statically indeterminate axially loaded columns. As shown, two composite columns of steel and concrete are used to support a rigid platform. The columns are cylindrical, with a steel bar encased in concrete. The outer diameter of each column is dc = 26 cm . The steel in the left column has a diameter of d1 = 13 cm . A load of P = 56 kN is applied with L1 = 1.8 m and L2 = 1.9 m . The height of the columns is h = 2.2 m . The moduli of elasticity for steel and concrete are Es = 200 GPa and Ec = 30 GPa , respectively.
A cylindrical column made of 304 stainless steel and 3m high must support a load of 1000kg. It is recessed in the ground and free in the upper end. a) Calculate the compressive stress, then the minimum diameter of the column to respect a safety factor of 3 on the elastic limit. Answer for a) = Compressive stress = 86.78 MPa b. Given the nature of this installation, this column is at risk of buckling. Calculate again the minimum diameter necessary to respect a factor of safety of 3 on the critical constraint.
A tensile force of 100 kN is applied on a 0.02-m diameter and 2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to2.01 m. The true axialstrain is?