A 75 W light bulb is used for 12 hours a day. The electricity for this bulb comes from a natural gas fired power plant that operates with 49% efficiency. How much CO₂ is emitted per day to power this light bulb? Make a simple estimate of the CO2 emissions from the power plant, ignoring transmission losses. 0.0024 kg CO2/day x 0.0024 We mentioned earlier in the course that energy technologies in developing countries often have much lower efficacies than those in developed countries. Let's look at one example, lighting via kerosene lamps, which are common in developing countries but about 150x less effective than incandescent lightbulbs at turning energy into useful light. If a family wanted just one tenth of the light provided by the 75 W lightbulb, they'd need to consume 15x as much power, or 1125 W. If a family ran 1125 W worth of kerosene lamps for just 2 hours each day, how much CO2 would this emit? You may assume that kerosene produces the same emissions as gasoline. 3.00 kg CO2/day X 3.00

A 75 W light bulb is used for 12 hours a day. The electricity for this bulb comes from a natural gas fired power plant that operates with 49% efficiency. How much CO₂ is emitted per day to power this light bulb? Make a simple estimate of the CO2 emissions from the power plant, ignoring transmission losses. 0.0024 kg CO2/day x 0.0024 We mentioned earlier in the course that energy technologies in developing countries often have much lower efficacies than those in developed countries. Let's look at one example, lighting via kerosene lamps, which are common in developing countries but about 150x less effective than incandescent lightbulbs at turning energy into useful light. If a family wanted just one tenth of the light provided by the 75 W lightbulb, they'd need to consume 15x as much power, or 1125 W. If a family ran 1125 W worth of kerosene lamps for just 2 hours each day, how much CO2 would this emit? You may assume that kerosene produces the same emissions as gasoline. 3.00 kg CO2/day X 3.00

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A 75 W light bulb is used for 9 hours a day. The electricity for this bulb comes from a natural gas fired power plant that operates with 46% efficiency. How much CO2 is emitted per day to power this light bulb? Make a simple estimate of the CO2 emissions from the power plant, ignoring transmission losses.
A certain coal-fired power plant has a rated power capacity of P = 955 MW. The output of this plant is W = 0.39QH, where QH is the energy input as heat from the hot reservoir. Which would increase the efficiency more, doubling QH or reducing QC by half? Doubling Qh would bring about the greater increase in efficiency. Doubling Qh and reducing Qc by half will have the same effect in increasing the efficiency. Neither doubling Qh and reducing Qc by half would change the efficiency. Both doubling Qh and reducing Qc by half would reduce the efficiency. Reducing Qc by half bring about the greater increase in efficiency.
A typical person begins to lose consciousness if subjectedto accelerations greater than about 5g (49.0 m/s2) formore than a few seconds. Suppose a 3.00 x 104-kg mannedspaceship’s engine has an exhaust speed of 2.50 x 103 m/s.What maximum burn rate |ΔM/Δt | could the engine reachbefore the ship’s acceleration exceeded 5g and its humanoccupants began to lose consciousness?
How many joules are in 1 kWh (kilowatthour)?
Suppose a battery operates a 2.25 W electric clock for 19.5 months. 1. What is the available energy content, in joules, of the battery? 2. How many years can a battery that supplies 7.75 × 104 J run a pocket calculator that consumes energy at the rate of 1.05 × 10-3 W?
A 2.0 m2 solar panel is fully illuminated by sunlight. Assume the sunlight has a power density of 0.10 J/cm2 -s. a) If the efficiency of the solar panel is 16%, how much electrical energy will it deliver in one hour? b) If this energy is stored in a battery, how long will it keep a 100 W incandescent lightbulb burning if the bulb has an efficiency of 2.6%. (Efficiency of the lightbulb is the light out - - 100 W - to the electrical power in.)
Consider a 24-kW hooded electric open burner in an area where the unit costs of electricity and natural gas are $0.10/kWh and $1.20/therm (1 therm = 105,500 kJ), respectively. The efficiency of open burners can be taken to be 73 percent for electric burners and 38 percent for gas burners. Determine the rate of energy consumption and the unit cost of utilized energy for both electric and gas burners.
4. A 30 W light bulb is left on for 8 hours overnight, how much energy was wasted? ANSWER THIS IN G.R.E.S.A. FORM.
Suppose a tank contains 714 m3 of neon (Ne) at an absolute pressure of 1.01x105 Pa. The temperature is changed from 293.2 to 294.7 K. What is the increase in the internal energy of the neon?
In the calibration step of a thermochemistry experiment, a current of 124 mA, from a 24.0 V source was allowed to flow through the electrical heater for219 s and was found to result in an increase in the temperature of the calorimeter and its contents of +1.39 K. Given that the energy supplied by an electrical circuit is the voltage multiplied by the current, multiplied by the time, what is the heat capacity of the calorimeter and its contents? A) 194 JK^-1 B) 322 JK^-1 C) 469 JK^-1 D) 731 JK^-1
How much time is needed for a surgical cauterizer to raise the temperature of 1.00 g of tissue from 37.0ºC to 100ºC and then boil away 0.500 g of water, if it puts out 2.00 mA at 15.0 kV? Ignore heat transfer to the surroundings. How do I check my work for this probelm?
An insulated piston–cylinder device contains 5 L of saturated liquid water at a constant pressure of 175 kPa. Water is stirred by a paddle wheel while a current of 8 A flows for 45 min through a resistor placed in the water. If one-half of the liquid is evaporated during this constant-pressure process and the paddle-wheel work amounts to 400 kJ, determine the voltage of the source. Also, show the process on a P-v diagram with respect to saturation lines.