Problem: J0.33A a5 mm.,fire hasehaving a jet diametor of 25 mm. The headl lost in thenozzle is 4% of the velocity head in the jet. 4 the gage"dischargos water through a nozzlepregeune at the bare of6) the flow or dNcharge in cms,at the base of the nozzle s 540KPa, findm/sec(6) the velocity at 2 in m/eec, det velocity)602165mm. Ønozzlestream afH20Figure:-datumC25mm. dia, of jetV.AGNEN; d, = C5mm 0.065m.da 25 mm 0.025m.る,-0Helne) = 42 of0. 04 VE29(c) Also determine the power develop by the jet in kW.

Answered: Image /qna-images/answer/7f65343d-5150-4858-a30f-d2429577e956.jpg

A a5 mm. fire hose dischargos water through a nozzle having a jet diametor of 25 mm. The head last in the nozzle is 4% of the velocity head in the jet. f the gage preseure at (a) the flow or (6) the velocity at 2 in m/sec. (et velocity) the bare of the nozzle i540 Ka, find dichange in cms, m³/sec 65mm. Ø nozzle stream of H2O Figure: datum (25mm. dia, of jet V.A GNEN: d, = C5mm 0.065m. de a 25 mm $ 0.025m. 2, =0 y 0.04 V 29 = 540 Kfa 29a c) Also determine the power develop by the jet in kW.

A a5 mm. fire hose dischargos water through a nozzle having a jet diametor of 25 mm. The head last in the nozzle is 4% of the velocity head in the jet. f the gage preseure at (a) the flow or (6) the velocity at 2 in m/sec. (et velocity) the bare of the nozzle i540 Ka, find dichange in cms, m³/sec 65mm. Ø nozzle stream of H2O Figure: datum (25mm. dia, of jet V.A GNEN: d, = C5mm 0.065m. de a 25 mm $ 0.025m. 2, =0 y 0.04 V 29 = 540 Kfa 29a c) Also determine the power develop by the jet in kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Acentrifugal pump has di = 24 cm, dz = 36 cm, b1 = 12 cm, bz =7.5 cm, B1 = 22°, and B2 = 38° and rotates at 1170 r/min. If the fluid is gasoline at 20°C and the flow enters the blades radially, estimate the theoretical (a) flow rate (b) horsepower, and (c) head. For gasoline, take p=680 kg/m3.
A 5 MW turbine is developed under an effective head of 320 m. The turbine efficiency is85%. Velocity coefficient of the nozzle is 99%.(a)Select which is the appropriate turbine based on effective head. (b)What should be the wheel diameter in meters assuming it is 12 times the diameter of the jet?
Suppose that the axial-flow pump of Fig. with D =18 in, runs at 1800 r/min. (a) Could it efficiently pump25,000 gal/min of water? (b) If so, what head would result?(c) If a head of 120 ft is desired, what values of D and nwould be better?
A piston PDP has a 5-in diameter and a 2-in stroke andoperates at 750 r/min with 92 percent volumetric effi ciency.(a) What is its delivery, in gal/min? (b) If the pump deliversSAE 10W oil at 20°C against a head of 50 ft, what horsepoweris required when the overall effi ciency is 84 percent?
The pressure drop across a turbine is 200kPa. The flow rate is 0.25m3/min. WHat is most nearly the power output of the turbine?
A Kaplan turbine has the following specifications: H =25 ft., N=400 rpm; power = 650 hp. If the efficiency of the unit is 90%, estimate (a) the flow rate, (b) approxi-mate diameter of the runner, (c) turbine setting to avoid cavitation if the location is at sea level, and (d) turbine setting to avoid cavitation if the location of the unitis at an elevation of 5000 ft. The local temperature is 60°F.Ans: (a) Q=254 cfs; (c) Hs=5.8 ft.; (d) 0.12 ft.
Water flows from a tap at a pressure of 250 kPa above atmospheric prrssure. What is the velocity of the jet if frictional effects are neglected?A. 12.2 m/sB. 16.5 m/sC. 22.4 m/sD. 27.4 m/s
Provide clear and complete solution as well as diagram. The initial condition of air in an air compressor is 97 kPa and 27 oC and discharges air at 350 kPa. The bore and stroke are 250 mm and 280 mm, respectively with percent clearance of 6 percent running at 310 rpm. Find the volume of air at suction in m3/hr. A. 232.61 C. 156.34B. 289.16 D. 135.23
The centrifugal pump in Fig. has r1 = 15 cm,r2 = 25 cm, b1 =b2 = 6 cm, and rotates counterclockwiseat 600 r/min. A sample blade is shown. Assume α1 = 90°.Estimate the theoretical flow rate and head produced, forwater at 20°C, and comment.
In a certain hydraulic turbomachine, the following data apply:Inlet blade velocity is 20 m/s. Vu1=21 m/s; Vr1=10 m/s.At the exit, V2 is purely axial and has a value of 14 m/s, and blade speed is9 m/s. Is this power absorbing or power producing? Find E and the changes instatic and stagnation pressures. Would this machine be classified as a purelyradial, purely axial, or mixed flow type?Ans: E=420 J/kg; Δpstag=420 kPa; Δpstat=247.4 kPa
A Pelton wheel is to be designed for a head of 400 m when running at 500 rpm. The Pelton wheel develops 10000kW shaft power. The blade angle at outlet is 15º. The relative velocity of water is reduced by 5% by moving over the buckets. Velocity of the buckets = 0.45 times the velocity of the jet, overall efficiency = 0.8 and coefficient of the velocity = 0.98. If the Pelton wheel is provided with three nozzle, find (i) The diameter of jet (ii) Total flow rate and the force exerted by a jet on the buckets
A Kaplan turbine runner is to designed to develop 10000 hp, the net head is 5.5 m. Assume that the speed ratio is 2.09 and the flow ratio is 0.68, and the overall efficiency is 60%. The diameter of the boss is 1/3 rd of the diameter of the runner . The discharge is ؟