A balanced abc sequence source Vab= 400230° volt is connected to a star- connected (four wires) unbalanced load ZAN=82; ZCN = j8 2. If the total load is 10000 W +j6699 VAR. Draw the three-phase circuit and find load voltage per-phase. Calculate the phase current of each load. Determine the load ZBN.

A balanced abc sequence source Vab= 400230° volt is connected to a star- connected (four wires) unbalanced load ZAN=82; ZCN = j8 2. If the total load is 10000 W +j6699 VAR. Draw the three-phase circuit and find load voltage per-phase. Calculate the phase current of each load. Determine the load ZBN.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.24MCQ: Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line...

See similar textbooks

Similar questions

A single-phase source is applied to a two-terminal, passive circuit with equivalent impedance Z=3.045, measured from the terminals. The source current is i(t)=22cos(t)kA. Determine the (a) instantaneous power, (b) real power, (c) reactive power delivered by the source, and (d) source power factor.
In a balanced system, the phasor sum of the line-to-line voltages and the phasor sum of the line-to-neutral voltages are always equal to zero. (a) False (b) True
Star connected source with 3-phase balanced positive phase sequence feeds the delta connected system. The source phase voltage is given as Van=120∠80Vrms. If the line impedance is given as RL=0.2+j0.5 and the impedance of each phase of the balanced load is Z=6+j8 a) Find the amplitude of the current in the delta load? b) Find the amplitude of the voltage VA? c) Find the angle of voltage VA? d) Write the angle of the IAB current in degrees?
27. An unbalanced star-connected load is supplied from symmetrical three-phase mains. The load impedance are Za, Zb, Zc and the positive phase sequences is a, b, c. Calculate the value of the positive phase-sequence current when the line voltage of the three-phase balanced supply is 400 V and Za = (0+j10) 2. Zb=(0-j5) and Zc=(10+j0) [36.6 A] Ans.
In a balanced 3-phase system, the effective value of the IbB current for a triangular connected load is known as 15 (-150 degrees) Amperes and the effective value of the VCA voltage is known as 60 (90 degrees) Volts. Since it is known that the phase sequence is positive; Phase current IAB= 8.660 (60 degrees) A Phase current IAC= [Select ] Load impedance Z= [Select ] the total average power sent to the 3 phase load is Pt Aggregate= [Select ] (Note: Perform your operations using at least 3 digits after the comma.)
In a three-phase, three-wire circuit, find the phasor line currents to a balanced Y load in which each phase impedance is ?? = 20 ∠ 300, ??? = 120 ∠ 200 and the phase sequence is ABC.
In a three-phase, three-wire circuit, find the phasor line currents to a balanced Y load in which each phase impedance is ZY = 20 ∠ 300 , VAN = 120 ∠ 200 and the phase sequence is ABC.
In a balanced 3-phase system, the effective value of the IbB current of a delta-connected load is known as 8 (-30 degrees) Ampere and the effective value of the VCA voltage is 90 (-150 degrees) Volts. Since it is known that the phase sequence is positive; Phase current IAB=[ Choose ] Phase current IAC=[ Choose ] Load impedance Z=[ Choose ] Total average power sent to 3 phase load Ptotal=[ Choose ] (Note: Perform your operations using at least 3 digits after the comma.)
Can you please solve the d e f parts? Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best…
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 120 volts with an-bn-cn sequence. This source has an internal series impedance of 0.1+j1.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 40+j30; Zbn = 36-j15; Zcn = 18+j24 ohms. If there is a single-line-to-ground fault at line a load-side, what is the magnitude of the fault current in amperes?
A balanced three-phase source with grounded neutral has line-to-line voltages of 208 volts with ab-bc-ca sequence. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 18-j10; Zbn = 15+j25; Zcn = 20+j30 ohms. What is the magnitude of the overall total apparent power of the system in va?
The following three-phase circuit is symmetrical, with line voltage 220 V, 60 Hz, direct phase sequence, isolated neutral and the value of the impedances of the loads in the three phases are: Zan = 10 ohms Zbn = -10j ohm Zcn = -10j Ohm Find:a) Phase voltages on the load;b) Line and phase currents;c) The power supplied to the load. Consider the phase voltage in the reference(Va voltage angle equal to 0)