A balanced three-phase Y-connected generator with positive sequence has an impedance of 0.2 + j0.1N/Ø and an internal voltage of 220V/þ. The generator feeds a balanced three-phase Y-connected load having an impedance of 30 + j242/p. The impedance of the line connecting the generator to the load is 0.1 + j0.1N/4. The a-phase internal voltage of the generator is specified as the reference phasor. Calculate the average power lost in the line

A balanced three-phase Y-connected generator with positive sequence has an impedance of 0.2 + j0.1N/Ø and an internal voltage of 220V/þ. The generator feeds a balanced three-phase Y-connected load having an impedance of 30 + j242/p. The impedance of the line connecting the generator to the load is 0.1 + j0.1N/4. The a-phase internal voltage of the generator is specified as the reference phasor. Calculate the average power lost in the line

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.44P: Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a...

See similar textbooks

Similar questions

Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of (0.4j2.7) per phase. One of the loads absorbs 560 kVA at 0.707 power factor lagging, and the other 132 kW at unity power factor. The line-to-line voltage at the load end of the line is 2203V. Compute (a) the line-to-line voltage at the source end of the line. (b) the total real and reactive power losses in the three-phase line, and (c) the total three-phase real and reactive power supplied at the sending end of the line. Check that the total three-phase complex power delivered by the source equals the total three-phase comp lex power absorbed by the line and loads.
A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads connected in parallel. Load 1: Absorbs a total of 150 kW and 120 kvar. Load 2: Delta connected with an impedance of (150j48)/phase. Load 3: 120 kVA at 0.6 PF leading. If the line-to-neutral voltage at the load end of the line is 2000 v (rms), determine the magnitude of the line-to-line voltage at the source end of the line.
Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line currents as well as the neutral current are always zero. (a) True (b) False
Suppose you are Mr. Y who is working as an assistant engineer of PGCB. You have studied a wye-wye system during your investigation of a three-phase system. In this system, a Y-connected balanced three-phase generator is connected to a Y- connected balanced load with an impedance of 24 + j19 ohm per phase. The line joining the generator and the load has an impedance of 0.6 + j0.7 ohm per phase. Assuming a positive sequence for the source voltages and that Van = X
A three-phase line has an impedance of 0.1+j0.8 Ω/ϕ. The line feeds two balanced three-phase loads connected in parallel. The first load is absorbing a total of 630 kW and absorbing 840 kVAR magnetizing vars. The second load is Y-connected and has an impedance of 15.36−j4.48 Ω/ϕ. The line-to-neutral voltage at the load end of the line is 4000 V. What is the magnitude of the line voltage at the source end of the line?
Please answer ASAP for like this please it's urgent please Asap.. A balanced star (Y) connected three-phase generator is connected to a star (Y) balanced load whose impedance is (2+2j) Ω per phase. The line that joins the generator and the load has an impedance of (5+2j) Ω per phase. Furthermore, assuming a direct sequence in the generator voltages and that UR = 230∟0º V, determine: 1. The phase currents in the load. 2. Line currents. 3. The phase voltages at the load terminals. 4. Line voltages at source terminals. 5. Value of the line voltages at the load terminals
A balanced Y-connected generator with terminal voltage Vbc 5 200/08 volts is connected to a balanced-D load whose impedance is 10/408 ohms per phase. The line impedance between the source and load is 0.5/808 ohm for each phase. The generator neutral is grounded through an impedance of j5 ohms. The generator sequence impedances are given by Zg0 5 j7, Zg1 5 j15, and Zg2 5 j10 ohms. Draw the sequence networks for this system and determine the sequence components of the line currents.
A balanced delta connected load of "14+j19" 2- per phase is connected at the end of a three-phase line. The line impedance is "6+18j" 2- per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 Vrms. Taking phase "a" voltage Va as reference, determine the following: (a) Current in phase a. (b) Total complex power supplied from the source. (c) Magnitude of the line-to-line voltage at the load terminal.
A balanced delta connected generator supplies a line voltage of 180v rms to a balanced load connected in w and e, with a sequence abc and having an angle of 0 ° for the voltage Vab. considering that the load per phase is 45 + 20j Ω, calculate all the line currents and the real power (w) supplied by this generator to the load
A three-phase generator supplies a load through a balanced line. balanced three-phase. It is known:• the voltage between A to N (Van) at generator no-load (120∠0° ?) and the frequency (60 Hz); • the type of generator and load connection (star connection); • the generator impedance (0.8 + j0.5 Ω); • the resistance (0.8 Ω) and the inductive reactance (1.5 Ω) of each wire in the line; • the load impedance (39 + j28 Ω). It is requested, for an ABC phase sequence (positive sequence): a) The generator phase and line voltages. b) The phase and line currents supplied by the generator. c) Phase and line voltages on the load. d) The line voltage drop (phase and line values). e) The phasor diagram of the currents supplied by the generator.
A balanced three-phase, negative sequence, Y-connected generator is connected to a three-phase balanced Y-connected load. The generator has an impedance of 1.5-j1.25 Ω/phase. The impedance of the line connecting the generator to the load is 2.5+j1.25 Ω/phase. The phase “B” load voltage is 15∠20 kV. The impedance of each phase of the Y-connected load is 60-j80 Ω/phase. Calculate line voltage VABVAB at the load.
A 3-phase Y-connected load draws power from a 3-phase Y-connected source. The source voltage, ?=440∠0º?_rms and the load impedance, Z_y=(30+j15) Ω. The line impedance, Z_line= (1+j1)Ω and the system operates at 60 Hz. a) Draw the single-phase equivalent circuit and label all given quantities numerically. b) Calculatethe rms line (phase) current phasor in each phase. c) Calculate the total active or real power supplied by the source. d) Calculate the total active or real power consumed by the load. e) Calculate the total line loss i.e. the total activepower lost due to line. f) Determine the power efficiency of the system.