A boxed wooden shape is used to support the loads shown on the beam. The dimensions of the shape are shown. Consider the entire 18 ft length of the beam, and determine the following: • Moment of inertia of the cross section • Bending moment at location B • Maximum normal stress at location B 1,800 lb 2,100 lb 1 in. 800 Ib/ft M S in. B C D E 1 in. 6 in. I in. I in. 7 ft 3 ft 4 ft 4 ft

A boxed wooden shape is used to support the loads shown on the beam. The dimensions of the shape are shown. Consider the entire 18 ft length of the beam, and determine the following: • Moment of inertia of the cross section • Bending moment at location B • Maximum normal stress at location B 1,800 lb 2,100 lb 1 in. 800 Ib/ft M S in. B C D E 1 in. 6 in. I in. I in. 7 ft 3 ft 4 ft 4 ft

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A standard steel shape (I=48.7x10 mm ) is used to support the loads shown on the beam in the figure. The dimensions from the top and bottom of the shape to the centroidal axis are shown on the sketch of the cross section. Consider the entire 10-m length of the beam and determine the following: 1. Calculate the vertical reaction at B in kN. 2. Calculate the maximum positive moment in kN.m. 3. Calculate the maximum negative moment in kN.m. 4. Calculate the compressive bending stress considering the maximum positive bending moment in MPa. 5. Calculate the tensile bending stress considering the maximum positive bending moment in MPa. 6. Calculate the compressive bending stress considering the maximum negative bending moment in MPa. 7. Calculate the tensile bending stress considering the maximum negative bending moment in MPa. NOTE: Kindly answer all the numbers with complete solution. Needed ASAP
Calculate the maximum shear stress tmax the maximum bending stress emax in a wood beam (see figure) carrying a uniform load of 22.5 kN/m (which includes the weight of the beam) if the length is 1.95 m and the cross-section is rectangular with a width of 150 mm and height 300 mm, and the beam is either (a) simply supported as in the figure part a, the or b has sliding support at right as in the figure part b.
A steel plate 2.5 m x 1.6 m x 100 mm thick is to be hoisted by a steel cable sling as shown in the figure. Assume the steel weighs 77.3 kN/cu.m. Determine the shear stress (MPa) in the 16 mm diameter pins through the clevis The correct answer is 45.33. Show solution.
Need answer ASAP. Please be detailed and clear with your solution. II. Shown is a parabolic segment submerged vertically in water. W.S. 3 m 60 cm 3 m vertex 1) Determine the magnitude of the total force on one face of the area, in kN. * 2) Determine the location of the total force from the W.S. *
The following rigid structure ABCD is supported by a hinge at B and two bars at C and D. The applied load is 100 kN. The data is shown in the table. Determine: The stress in each bar. Answ: 27.01 MPa, 328.01 MPa The vertical displacement at the point where the load is applied. Answ: 0.9403 mm. The rotation at point B. Answ: 0.001069 rad. The horizontal displacement 400 mm below point B. Answ: 0.42741 mm.
Please answer correctly, badly need it. Thank u godbless The internal shear force at a certain section of a steel beam is V= 8.8 kN. The beam cross-section shown in the figure has dimensions of b=141 mm, c=31 mm, d=63 mm, and t=6 mm. Determine: (a) the shear stress at point H. (b) the shear stress at point K. (c) the maximum horizontal shear stress in the cross-section. Break the cross-section into five rectangles, as shown. It is seen that the two labeled with a (1) are identical, and the two labeled with a (2) are identical. Find A1, the area of rectangles (1), and y1, the vertical distance from the bottom edge of the cross-section to the centroid of rectangles (1). Similarly, find A2, the area of rectangles (2), and y2, the vertical distance from the bottom edge of the cross-section to the centroid of rectangles (2). Then, find A3 and y3 for rectangle (3). A1= mm2 y1= mm A2= mm2 y2= mm A3= mm2 y3= mm Find y¯, the vertical…
Draw the stress and bending moment diagrams for the frame shown.EI is constant. Use the force method. I have a correct answer, it is: VA = 29.3 kN (↑); HA = 20 kN (→); VB = 42.70 kN (↑). I don't know how to get to this result, please show me how to get there step by step
Dimension the beam in the figure, knowing that it must be an I profile, as indicated, and that its allowable normal stress is equal to 1400 kgf / cm²
Calculate the compressive force at point A when the L force is applied vertically to the arm in the system shown in the figure. L=228
A beam has a T section, and the loads are shown below. Instruments to measure strain are set in points C and D. Determine the value of load P if the strain in point C is +527x10-6 [mm/mm] (elongation), and at point D, it is -73x10-6 [mm/mm] (contraction). The inertia of the section is 2,000 [cm4] and the elastic modulus is 21x103 [kgf/mm2].
What is the flexural stress in psi, 3 inches from the top of the beam and 2 feet from the left end of the beam? What is the maximum bending moment of the figure below
A cantilever beam supports the loads shown. The cross-sectional dimensions of the shape are also shown. Assume a = 0.6 m, PA = 2.5 kN, PB = 7.0 kN, PC = 4.0 kN, d = 100 mm, bf = 110 mm, tf = 10 mm, tw = 7 mm. Determine(a) the maximum vertical shear stress.(b) the maximum compression bending stress.(c) the maximum tension bending stress. See the coordinate system for the beam in the problem figure with the origin of the x axis at the fixed support. Consider four points along the beam’s axis:Point A at x = 1.8 mPoint B at x = 1.2 mPoint C at x = 0.6 mPoint D at x = 0Break the beam into three segments: AB, BC, and CD. Enter the shear force in each segment with its correct sign based on the coordinate system in the problem figure and the sign convention for shear forces in Chapter 7.Answers: VAB = kN VBC = kN VCD = kN Enter the maximum shear force magnitude in the beam. Since this is a magnitude, enter a positive value.Answer: Vmax = kN Enter the…