Answered: A cantilever hollow circular bar 5mm…

A cantilever hollow circular bar 5mm thick with inside diameter of 75mm is subjected to a torque of 3kN-m at its free-end. 11. Find the max shear stress in the bar.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.5P: A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used...

See similar textbooks

Related questions

Q: A hollow aluminum propeller shaft, 30 ft. long with 15 in. outer diameter and an inner diameter…

Q: A shaft is to be fitted with a flanged coupling having 8 bolts on a circle of diameter 150mm. the…

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: A solid and a hollow shaft, connected by a coupling, transmit power. The outside diameters of the…

Q: A hollow aluminum propeller shaft, 30 ft. Ilong with 15 in. outer diameter and an inner diameter…

A: (a) The maximum shear stress, τmax = 3.8 ksi. (b) The angle of twist of the shaft, θmax = 0.052…

Q: A shaft 80 mm diameter transmits power at maximum shear stress of 63 MPa. Find the length of a 20 mm…

Q: A hollow steel shaft 2304mm long is to be designed to transmit a torque of 28350 kJ. The shear…

A: Given data: steel shaft long (l)=2304mm transmit torque(T)=28350KJ Shear modulus of…

Q: According to a stiffness based design, a solid shaft has a diameter 50mm and the shear modulus of…

A: here, G= 35 Gpa = 35000 Mpa d = 50mm J = pi×d^4/32 mm4 Torsional rigidity = G×J.

Q: A hollow aluminium tube used in a roof structure has an outside diameter 104mm and an inside…

A: A) Angle of twist for the given max shear stress in a hollow shaft: The angle of twist of a hollow…

Q: A steel tube with outer and inner diameters are 86mm and 52mm respectively is twisted by torques at…

Q: A drill drills a hole in a leg of a furniture. Uses a hand-operated drill with a bit of diameter…

A: Given Data Diameter of drill bit is : d=5.79 mm=5.79×10-3 m Resisting torque is : T=0.36 N·m…

Q: A solid shaft 100 mm in diameter is subjected simultaneously to an axial compressive force of 600 kN…

Q: A uniform shaft of diameter 30 mm is subject to a 60 N of tangential force. Calculate the shear…

A: Given data: The diameter of the shaft is D = 30 mm. The tangential force acting on the shaft is F =…

Q: A solid circular shaft of diameter 60mm is subjected to an axial stress of 20 MPa. It is further…

Q: (8) A steel shaft transmits 30kW @ 1,400rpm. Considering allowable shearing stress based on pure…

A: answer for a. d=0.33099 m

Q: A hollow simple supported shaft 3m made of steel with di/do of 0.6. The shaft is subjected to a…

A: Given: Length of the shaft=3mDiDo=0.6 or Di=0.6DoBending moment (M)=4kNPower tranmitted…

Q: A steel shaft in the form of a solid body circular rod or a circular tube can be manufactured.…

A: Given, Torque, T=1200 N.m The maximum permissible unit torsion angle, θ=0.750 /m=75×π180 rad…

Q: A thin steel tube 75 mm in diameter is 3 mm thick. If the allowable stress is 80 MN/m? and modulus…

A: When the force is applied in tangential direction in the plane of transverse cross-section, torque…

Q: A propeller shaft is required to transmit 45 kW power at 500 r.p.m. It is a hollow shaft, having…

A: Given data: - The power transmitted by the shaft is P = 45 kW. The speed of the shaft is N = 500…

Q: . Determine the torque applied.

A: Determine the torque applied.

Q: A hollow steel shaft is to transmit 5,605 N·m of torque and is to be sized so that the torsional…

Q: Design a key to transmite 40 kw power by a shaft of 50 mm diameter which rotates 1200 r.p.m , if the…

A: Power P=40 kW Shaft diameter d=50 mm Speed N=1200 rpm Permissible shear stress τ=35Nmm2 Crushing…

Q: (7) The drive of an outboard motor which rotates @ 5,000rpm is supported by a spline in the…

Q: A steel shaft 50 mm diameter and 500 mm long is subjected to a twisting moment of 1100 N-m, the…

A: As per our guidelines we are supposed to solve only one question if multiple questions are asked .…

Q: A steel tube of outer diameter 86mm and inner diameter 52mm is under pure torsion. The diameter of a…

A: Outer diameter = 86 mm Inner diameter = 52 mm Answer is (B) 81.98 mm

Q: A solid shaft BC is fixed at the B end and subjected to torque T at the C end, as shown below. The…

Q: The internal diameter of a hollow shaft is 2/3 rd of its external diameter. Compare the strength and…

Q: A hollow steel propeller shaft, 20 ft. long with 15 in outer diameter and 12 in. inner diameter,…

Q: A forged steel bar, 50 mm in diameter, is subjected to a reversed bending stress of 250 MPa. The bar…

Q: 2 A hollow simple supported shaft 3m made of steel with di/do of 0.6. e shaft is subjected to a…

Q: A 1 m length of 50 mm diameter steel bar is subjected to a torque of 230 Nm. Calculate the maximum…

Q: A hollow shaft has an inner diameter of 0.035 m and an outer diameter of 0.06 m. Compute for the…

Q: A shaft with a hollow cross section is subjected to torque of magnitude T = 5.5 kN-m. If the outer…

Q: A hollow vertical cylindrical steel pipe with an outside diameter of 300 mm and 6 mm thick has a…

Q: 2.29. A cylindrical steel shaft is required to transmit a bending moment of 1000 Nm and a torque of…

Q: A hollow aluminum tube used is a roof structure has an outside diameter d2=70mm and inside diameter…

A: (a) The angle of twist is ϕ = 7.3o. (b) The diameter required for solid shaft is d = 63.3 mm.

Q: A shaft is acted upon by a torque that continuously varies from 2200 to 6400 in-lb. It has a…

Q: B) Estimate the minimum shaft diameter according to the maximum shear stress theory for a shaft…

Q: A steel bar withstands simultaneously a 30 kN compressive force, a 5 kNm bending moment and a 1kNm…

Q: A hollow steel tube used in a roof structure has an outer diameter, di = 104 mm and inner diameter,…

Q: A steel shaft in the form of a solid body circular rod or a circular tube can be manufactured.…

Q: The flanges used in the connection of the two shafts are connected to each other with 6 bolts. The…

A: Given is shaft diameter (ds) = 100 mm Torque (T) = 300 N-m diameter of circle passing through bolt…

Q: A hollow nickel steel shaft with outside diameter is twice the inside diameter is to transmit 1492…

Q: hollow steel shafts transmits 200kW of power at

A: Given Data : Speed(N)=150 rpm Power(P)=200 KW Length(L)=5 m Angle of twist(A) =30 Permissible…

Q: steel shaft can be manufactured as a circular rod with a solid body or a circular tube. The shaft is…

A: σS=Shear Safety Stress for the Shaft Material=40 MPaT=Torsion Moment of Shaft=1200…

Q: A solid circular shaft is subjected to a bending moment of 2800 Nm and a torque of 10,000 Nm. The…

A: Given Bending moment = 3000 Nm Torque = 100000 Nm Material 45C8 Maximum tensile stress = 700 MPa…

Concept explainers

Torsion

In mechanical engineering, torque, torsion, and twisting moment are three of the most important concepts which have different meanings. Torque is the consequence of a moment of a force that produces an angular acceleration in a body or induces rotational kinetic energy in a body. For instance, in an automobile, the power transmission shaft is a body that is always under rotation due to the external torque acting on it, this torque is created by the engine.

Question

A cantilever hollow circular bar 5mm thick with inside
diameter of 75mm is subjected to a torque of 3kN-m at its
free-end.
11. Find the max shear stress in the bar.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used for a 10-ft-long beam subjected to 1250 kip-in, torque at both ends, calculate the maximum shear stress and the angle of twist between the ends. Use G = 11,600 ksi.
A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?
A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?
A circular tube AB is fixed at one end and free at the other. The tube is subjected to concentrated torques as shown in the figure. If the outer radius of the tube is 1.5 in, and the thickness is 3/4 in., calculate the strain energy stored in the tube. Let G= 11,800 ksi.
A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the figure. The diameter dBof the bar is 1/4 in., the diameter D Wof the washers is 7/8 in., and the thickness is of the fiberglass deck is 3/8 in. If the allowable shear stress in the fiberglass is 300 psi, and the allowable bearing pressure between the washer and the fiberglass is 550 psi, what is the allowable load P allowon the tie-down?
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A shaft is to be fitted with a flanged coupling having 8 bolts on a circle of diameter 150mm. the shaft may be subjected to either a direct tensile load of 400kN or a twisting moment of 18kN-m. if the maximum direct and shearing stress permissible in the bolt material are 125MPa and 55MPa respectively, find the minimum diameter of the bolt required.
A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further subjected to a torque of 10 kN-m. The maximum principal stress is ?
A hollow aluminum tube used is a roof structure has an outside diameter d2=70mm and inside diameter d1= 50mm. The tube is 2.5m long and the aluminum has a shear modulus of G=28 GPa. a.) If the tube is twisted in pure torsion by torques acting at the ends, what is the angle of twist in degrees when the max shear stress is 50MPa? b.) What diameter 'd' is required for a solid shaft to resist the same torque with the same maximum stress?
A solid shaft 100 mm in diameter is subjected simultaneously to an axial compressive force of 600 kN and atorque that twist through an angle of 1.5o in a length of 8 m. if the modulus of rigidity is 80 000 MPa. What is maximum shear stress of the shaft?
A steel shaft can be manufactured as a circular rod with a solid body or a circular tube. The shaft is required to bear a torque of 1200 N.m. Since the shear strength for the shaft material is 40 MPa, the maximum permitted unit torsion angle of the bar is 0.750 / m and the shear modulus of the steel is G = 78 GPa;a) Find the required diameter d0 for a solid circle shaft.b) Find the required outer diameter d2 for a ring section shaft whose thickness is 1/10 of the outer diameter.c) Find the diameter ratio (d2 / d0) and the weight ratio for ring cross section and solid section shafts.