a cellur network is to be designed to cover an area of 292.375km2 with 1.5km radius cells. if the toal transmission bandwidth can only support 1080 channels with the overall system supporting 6000 users simultaneously (total capacity of the systems), find the reuse factor?

a cellur network is to be designed to cover an area of 292.375km2 with 1.5km radius cells. if the toal transmission bandwidth can only support 1080 channels with the overall system supporting 6000 users simultaneously (total capacity of the systems), find the reuse factor?

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter9: Computer Networks

Section: Chapter Questions

Problem 2RQ

See similar textbooks

Related questions

Q: According to the default EIGRP metric, a route that consists of one serial link has a higher metric…

A: EIGRP stands for Enhanced Interior Gateway Routing Protocol is a distance vector protocol,network…

Q: A 1500 byte packet is sent from your home to a server. It is first sent over a 6 Mbps cable link.…

A: Details provided are:- Packet size = 1500 byte First send on 8 Mbps cable link -------------- PD…

Q: Between two hosts A and B that are connected by a link with the bandwidth 1 Mbps and with a one-way…

A: Your solution is given below. Given :- Bandwidth is 1 Mbps RTT = 2 ms Tp = 1 ms = 1 * 10-3…

Q: If a data is steadily flowing at the rate of 1 Mbps with a sudden peak in data rate of 2 Mbps, then…

A: Given that if a data is steadily flowing at the rate of 1 Mbps with a sudden peak in data rate of 2…

Q: A 2 km long broadcast LAN has a bandwidth of 50 Mbps and uses CSMA/CD. The signal travels along the…

A: In CSMA/CD, when transmitting node transmits its frame is listening for collisions . when it…

Q: Based on your understanding of CSMA/CD, sketch a State Diagram of the Rules that relates to it with…

A: Hey there, I am writing the required solution based on the above given question. Please do find the…

Q: for a switching network. Calculate the total data times needed when the follow used: (a) Circuit…

A: The answer is

Q: A 100M-bit Ethernet has the following topology Hub The maximum length of each cable is 100m. The…

A: 64 bytes least bundle length is certainly not a self-assertive number. In a 10Base5 actual layer…

Q: For a transmission medium, SNRdb is given as 18. The given capacity of 28,26 Mbps is valid for which…

A: Given SNRdb=18 Capacity=28,26Mbps We need to calculate bandwidth and amount of signal level.

Q: The throughput of the link between the core switch and an employee laptop with 268,535,446 bits of…

A: The sample and numerous reference solutions of ammonia are placed in separate tall, flat-bottomed…

Q: 1.a. The data transmission rate in one direction over a BLSR ring network is _______ its OC-n line…

A: Defined the given statements

Q: Q6- Compute Packet transmission delay time needed to transmit L-bit packet into link with data rate…

A: According to the information given:- we have to compute packet transmission delay time ...

Q: A link has a transmission speed of 106 bits/sec. It uses data packets of size 1000 bytes each.…

A: Given: A link has a transmission speed of 106 bits/sec. It uses data packets of size 1000 bytes…

Q: Q7\ Assume a system support a frequency bandwidth that provides 1,008 traffic channels, Calculate…

Q: A 40 Mbps broadcast network that controls medium access using polling has 20 hosts and time required…

A: Introduction :We have to find the efficiency .

Q: Assume a slotted ALOHA-based network using a shared link of 200 M What is the maximum effective…

A: Here in this question we have given a slotted aloha with link of bandwidth of 200 mbps.and we have…

Q: If the bandwidth of the network is 10Mbps, which is used to transmit the data between two nodes…

A: The answer is

Q: Consider a 10 km long broadcast LAN has 10^10 bps bandwidth and uses CSMA/CD. The signal travels…

A: Below is the answer with calculation and explanation:

Q: For a link with a bandwidth of R, what is the theoretical maximum arrival rate?

A: Answer : All in all terms, throughput is the rate of production or the rate at which something is…

Q: n a full duplex communication by using UTP cable, Pr power is measured as 15 mw and Adb as 10,79 dB.…

A: The correct answer to this question is " ( C.) minumum pc:8.33mw NEXTdb: 10 db ACRdb:17.79dB "

Q: A broadcast channel has 10 nodes and total capacity of 10 Mbps. It uses polling for medium access.…

A: Introduction :Given ,a broadcast channel. Using polling .nodes = 10 bandwidth = 10 Mbps Polling…

Q: Question 1. 200 nodes are connected to a 1,500-meter length of coaxial cable. Using some protocol,…

A: Question: 200 nodes are connected to a 1500 metre length of coaxial cable using some protocol each…

Q: Stations in network send frames of size 1000 Bytes at the rate of 10 Mbps. What is the vulnerable…

A: Required: Stations in network send frames of size 1000 Bytes at the rate of 10 Mbps. What is the…

Q: Assume that each user requires 500 kbps and is only active 25% of the time. How many users can we…

A: Statistical multiplexing gain: Switching systems in communication networks accomplish statistical…

Q: A group of network users share a 6Mbps network link. Each user requires 125kbps when transmitting,…

A: Given, Bandwidth of network = B = 6 Mbps which equals to 6000 kbps Bandwidth required by a user = S…

Q: Choose the correct answer and explain : ( I need answers within 15 min please ) ‏Minimum frame time…

A: The minimum frame time in microseconds is: 1

Q: 200 nodes are connected to a 1,500-meter length of coaxial cable. Using some protocol, each node can…

A: The answer is as follows:-

Q: Question 1 ) Suppose there are 4 nodes sharing a broadcast channel using TDMA protocol. Suppose at…

A: Time Division Multiple Access allows each node to have a fixed time slot for channel access. Per…

Q: A local area network (LAN) for 20 computers is planned. Determine the number of required…

A: Here in this question we have given local area network for 20 computers is planned. And we have…

Q: Explain, using words and a time diagram, why tge ethernet (IEE 802.3) has a minimum frame size. How…

A: Introduction Here i explain why ethernet contains a minimum frame size. Ethernet is intended to…

Q: Consider a LAN cable with a 1O0Mbps network link which is connecting the tw

A: Step by step explanation is in given below.

Q: What is the total delay (latency) for a frame of size 5 million bits that is being sent on a link…

Q: Suppose there are 4 nodes sharing a broadcast channel using TDMA protocol. Suppose at time t=0:…

A: Suppose there are 4 nodes sharing a broadcast channel using TDMA protocol. Suppose at time t=0: Node…

Q: CAT-6 twisted pair cable is a commonly used computer networks cable that provides a frequency…

A: Given parameters in the scenario is as follows: Bandwidth = 250 MHz SNRdB = 20 dB As the SNR is 20…

Q: Calculate the delay x bandwidth product for the following links. Use one-way delay, measured from…

A: calculate delay * bandwidth product for the following links:

Q: A 1-km long, 10 Mbps CSMA/CD LAN (not 802.3) has a propagation speed of 200 m/u sec. Repeaters are…

A: Answer: Solution:

Q: Segments are transmitted using GO-BACK-N ARQ over a link with RTT= 6 milliseconds with 17 Mbps…

A: solution for the above question is solved in below step 2:-

Q: Suppose, four users with 150khz bandwidth are multiplex and use 10kHz for the guard bands, then what…

A: 1.For four channels, we need at least three guard bands of 10 khz. This means that the required…

Q: Consider the figure below, with three links, each with the specified transmission rate and link…

A: According to the asked question, the solution is given below with a proper explanation.

Q: Nodes A and B are on the same 10 Mbps Ethernet segment, and the propagation delay between two nodes…

A: The Answer is in Below Steps

Q: We have a 4 km down CSMA / CD channel with a capacity of 10 Mbps. Assume the average negotiable…

A: Answer: Given: R be data rate is 10 Mbpsd be link distance of 4kmV be propagation velocity (m/s) is…

Q: 200 nodes are connected to a 1,500 metre length of coaxial cable. Using some protocol, each node can…

A: Given; 200 nodes are connected to a 1,500 metre length of coaxial cable. Using some protocol, each…

Q: What are the differences between the following types of wireless channel impairments: path loss,…

Q: If we know the capacity of the link (bandwidth) and the time to receive the first ACK (delay) fre…

A: The first packet was sent in 301ms =301/1000 =0.301second 1gb/s=1000000000 byte/sec

Q: (b) For the multipath power delay profile given in Figure 1, 1. Find the mean excess delay and RMS…

A: ζ¯=0×1+0.1×1+1×20+0.1+1ζ¯=2.11.1=1.909 μsec ζ¯2=02×1+0.1×12+1×220+0.1+1ζ¯=4.11.1=3.7272 μsec

Q: Suppose value of K is 1 (Ethernet CSMA/CD), compute backoff time when link capacity (data rate) is:…

A: Considering that the data packet is 1 byte.

Concept explainers

Network transmission cabling

A network is a collection of devices connected by communication links. A device can be a computer or any instrument capable of sending and receiving data or information formed by other nodes toward the network. A channel that connects people or things is known as a network. It sends the data from one place to another. It is the basic concept of a computer, network, and data communications.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Introduction

VIEW

Answer

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, computer-science and related others by exploring similar questions and additional content below.

Similar questions

You are tasked to create a network with minimum bandwidth capacity of 50 Mbps, the Network bandwidth of the channel is 45 MHz Assuming white thermal noise, what is the level of signal-to-noise ratio required to maintain the data rate?
The throughput of the link between the core switch and an employee laptop with 268,535,446 bits of data transmitted through a link in 1,810.80 seconds was calculated by an Omantel network engineer. Using the example above, respond to the following questions: Describe the principle of effective bandwidth.
H2. Consider designing a 2 km-long, 1 Gbps LAN which uses CSMA/CD and has a propagation speed of 200 m/µsec. What is the minimum frame size and the optimal channel efficiency that can be achieved using this frame size?
A group of network users share a 6Mbps network link. Each user requires 125kbps when transmitting, but only transmits for 10% of the time. If the network is circuit-switched, how many users can be supported?
200 nodes are connected to a 1,500-meter length of coaxial cable. Using some protocol, each node can transmit 50 frames/second, where the average frame length is 2,000 bits. The transmission rate at each node is 100 Mbps (where 1 Mbps = 1,000,000 bps). What is the efficiency of this protocol?
The throughput of the link between the core switch and an employee laptop with 268,535,446 bits of data transmitted across it in 1,810.80 seconds had to be determined by an Omantel network engineer. Using the aforementioned example, respond to the following questions: Describe the theory underlying effective bandwidth.
Assume that each user requires 500 kbps and is only active 25% of the time. How many users can we multiplex on an 8 Mbps link using packet switching to meet user requirements with a probability of at least 0.9? In this scenario, what is the statistical multiplexing gain?
Take into account that each user needs 500 kbps and is only online for 25% of the time. In order to ensure that at least 90% of our customers' needs are met, how many users can we multiplex on an 8 Mbps connection utilizing packet switching? What is the statistical multiplexing advantage in this case?
What percentage of an ATM link’s total bandwidth is consumed by the ATM cell headers? What percentage of the total bandwidth is consumed by all non payload bits in AAL3/4 and AAL5, when the user data is 512 bytes long?
Take into account that each user needs 500 kbps and is only online for 25% of the time. Using packet switching, how many people can we accommodate on an 8 Mbps connection with a probability of at least 0.9? What is the statistical multiplexing benefit in this case?
Question P Suppose two hosts, A and B, are separated by 2,000 km and are connected by a direct link of R = 2 Mbps. Suppose the propagation speed over the link is 2.5 x 108 meter/sec. Note that 1M bits = 1,000,000 bits. a. Calculate the propagation delay, dprop. b. Calculate the bandwidth-delay product, R x dprop. c. Now assume that the link bandwidth R = 100 Mbps. Calculate the bandwidth-delay product, R x dprop. Full explain this question and text typing work only We should answer our question within 2 hours takes more time then we will reduce Rating Dont ignore this line
In an 802.11b wireless LAN, suppose there are only two nodes, a source and a destination; the source node has a large amount of data to send to the destination node. The nodes are separated by 750 meters, and have powerful enough radios to communicate at this range. No other nodes operate in the area. Assume the following: Signal propagation speed is 3×108 meters/sec. DIFS, which is the first component of delay between noticing the medium being idle and beginning a new RTS transmission, is 50msec. The backoff time, which is the additional delay right after DIFS in case the source has additional packages to send, is chosen randomly for each packet. When there is no contention, it is uniformly likely to be anywhere from 0 to 31 slots long, where one slot is 20msec. SIFS has a value of 10msec. The frame header bits take a 200msec per packet to transmit; the Data field consists of 1100 bytes. Data is transmitted at an 11 Mbps rate. An ACK, RTS, and CTS each have a 200msec transmission…